Textural characteristics of sediments along the southern Red Sea coastal areas,Saudi Arabia     

Omar A. Alharbi  Allan T. Williams  Michael R. Phillips  Tony Thomas 《Arabian Journal of Geosciences》2016,9(19):735

A lack of understanding exists of the origin and textural characteristics of Saudi Arabian Red Sea coastal sediments. This paper concerns the southern coastline of Jizan on the Saudi Red Sea. It is some 160 km long characterised by either narrow rocky headlands with intermittent pocket beaches or wide low-lying beaches dissected by wadis. Granulometric testing of samples from 135 locations showed that beach sand size was mainly very fine to medium grained (M _z = 3.93 Ø), sorting ranged from 1.65 to 0.41 and skewness values from ?051 to 0.39, being mainly negative; dune sands were medium to fine grained (M _z = 1.13 Ø; average sorting 2.8), while skewness variations within dune samples indicated symmetrical to fine skewed values (б _Ι = 0.55 to 0.89). Most foreshore samples were derived from wadis. Wadi mud levels can be high, e.g. Baysh (84%), and wadi Samrah (90%) with mean grain size ranging from very fine to medium sand (M _z = 3.9 Ø), sorting being well to poor (0.45 to 1.52) due to sediment influxes. Sabkha had a wide range of sand/mud and significantly higher carbonate percentages than other environments. Sediment source differences and littoral reworking contributed to grain size variation. The carbonate content varied between 1.5 and 31.5% due to hinterland contributions, and spatial analysis showed increasing quantities of carbonate minerals towards the south. On the wider geographical front, findings from Jizan are similar to those of the Northern United Arab Emirates (UAE), including sabkhas, being composed of sand, skeletal carbonate, fine fluvial material and wind-blown silt and clay components of wadi origin. Further work on the northeastern Red Sea edge can hopefully confirm these findings.  相似文献   

Origin of complex zoning in olivine from diverse,diamondiferous kimberlites and tectonic settings: Ekati (Canada), Alto Paranaiba (Brazil) and Kaalvallei (South Africa)     

Lim  Emilie  Giuliani  Andrea  Phillips  David  Goemann  Karsten 《Mineralogy and Petrology》2018,112(2):539-554

Olivine in kimberlites can provide unique insights into magma petrogenesis, because it is the most abundant xenocrystic phase and a stable magmatic product over most of the liquid line of descent. In this study we examined the petrography and chemistry of olivine in kimberlites from different tectonic settings, including the Slave craton, Canada (Ekati: Grizzly, Koala), the Brasilia mobile belt (Limpeza-18, Tres Ranchos-04), and the Kaapvaal craton, South Africa (Kaalvallei: Samada, New Robinson). Olivine cores display a wide range of compositions (e.g., Mg# = 78–95). The similarity in olivine composition, resorption of core zones and inclusions of mantle-derived phases, indicates that most olivine cores originated from the disaggregation of mantle peridotites, including kimberlite-metasomatised lithologies (i.e. sheared lherzolites and megacrysts). Olivine rims typically show a restricted range of Mg#, with decreasing Ni and increasing Mn and Ca contents, a characteristic of kimberlitic olivine worldwide. The rims host inclusions of groundmass minerals, which implies crystallisation just before and/or during emplacement. There is a direct correlation between olivine rim composition and groundmass mineralogy, whereby high Mg/Fe rims are associated with carbonate-rich kimberlites, and lower Mg/Fe rims are correlated with increased phlogopite and Fe-bearing oxide mineral abundances. There are no differences in olivine composition between explosive (Grizzly) and hypabyssal (Koala) kimberlites. Olivine in kimberlites also displays transitional zones and less common internal zones, between cores and rims. The diffuse transitional zones exhibit intermediate compositions between cores and rims, attributed to partial re-equilibration of xenocrystic cores with the ascending kimberlite melt. In contrast, internal zones form discrete layers with resorbed margins and restricted Mg# values, but variable Ni, Mn and Ca concentrations, which indicates a discrete crystallization event from precursor kimberlite melts at mantle depths. Overall, olivine exhibits broadly analogous zoning in kimberlites worldwide. Variable compositions for individual zones relate to different parental melt compositions rather than variations in tectonic setting or emplacement mechanism.

  相似文献   

Structural and metamorphic evolution of the Moornambool Metamorphic Complex,western Lachlan Fold Belt,southeastern Australia     

G. Phillips  J. McL. Miller  C. J. L. Wilson 《Australian Journal of Earth Sciences》2013,60(5):891-913

The wedge‐shaped Moornambool Metamorphic Complex is bounded by the Coongee Fault to the east and the Moyston Fault to the west. This complex was juxtaposed between stable Delamerian crust to the west and the eastward migrating deformation that occurred in the western Lachlan Fold Belt during the Ordovician and Silurian. The complex comprises Cambrian turbidites and mafic volcanics and is subdivided into a lower greenschist eastern zone and a higher grade amphibolite facies western zone, with sub‐greenschist rocks occurring on either side of the complex. The boundary between the two zones is defined by steeply dipping L‐S tectonites of the Mt Ararat ductile high‐strain zone. Deformation reflects marked structural thickening that produced garnet‐bearing amphibolites followed by exhumation via ductile shearing and brittle faulting. Pressure‐temperature estimates on garnet‐bearing amphibolites in the western zone suggest metamorphic pressures of ～0.7–0.8 GPa and temperatures of ～540–590°C. Metamorphic grade variations suggest that between 15 and 20 km of vertical offset occurs across the east‐dipping Moyston Fault. Bounding fault structures show evidence for early ductile deformation followed by later brittle deformation/reactivation. Ductile deformation within the complex is initially marked by early bedding‐parallel cleavages. Later deformation produced tight to isoclinal D₂ folds and steeply dipping ductile high‐strain zones. The S₂ foliation is the dominant fabric in the complex and is shallowly west‐dipping to flat‐lying in the western zone and steeply west‐dipping in the eastern zone. Peak metamorphism is pre‐ to syn‐D₂. Later ductile deformation reoriented the S₂ foliation, produced S₃ crenulation cleavages across both zones and localised S₄ fabrics. The transition to brittle deformation is defined by the development of east‐ and west‐dipping reverse faults that produce a neutral vergence and not the predominant east‐vergent transport observed throughout the rest of the western Lachlan Fold Belt. Later north‐dipping thrusts overprint these fault structures. The majority of fault transport along ductile and brittle structures occurred prior to the intrusion of the Early Devonian Ararat Granodiorite. Late west‐ and east‐dipping faults represent the final stages of major brittle deformation: these are post plutonism.  相似文献   

Governance and technology transfer in the Clean Development Mechanism in India     

Jon Phillips  Kasturi Das  Peter Newell 《Global Environmental Change》2013,23(6):1594-1604

Despite significant technological advances in emerging economies, the further development of clean energy technologies in developing countries remains crucial to reducing the greenhouse gas emissions associated with economic development. In this paper we address two significant gaps in the growing body of literature that has assessed the role of the Clean Development Mechanism in promoting the transfer of clean technologies to developing countries. First, we present a qualitative analysis of the governance of the Clean Development Mechanism in India. This provides a basis for understanding the extent to which and the ways in which governance may impact upon the likelihood that projects promote technology transfer. Second, we provide a novel quantification of the level and nature of technology transfer that has occurred in Indian Clean Development Mechanism projects, based on insights from literature on technological capability building. We find that the Clean Development Mechanism in India has produced a negligible number of projects that promote technology transfer if technology transfer is understood as a process of learning about technology. Together these qualitative and quantitative analyses show how politics and governance have contributed to the current form of the Clean Development Mechanism market in India, in which processes of building indigenous technological capabilities have been neglected.  相似文献   

27Al, 29Si,and 23Na MAS NMR study of an Al,Si ordered alkali feldspar solid solution series     

Brian L. Phillips  R. James Kirkpatrick  Guy L. Hovis 《Physics and Chemistry of Minerals》1988,16(3):262-275

Solid-state ²⁷Al, ²⁹Si and ²³Na MAS NMR spectra have been obtained for an Al,Si ordered low albite to low microcline ion exchange series for which unit-cell parameters and ²⁹Si NMR data have previously been reported. ²⁷Al δ_i vary continuously with composition from 63.4 (±0.5) ppm for albite to 58.9 (±0.5) ppm for microcline, and parallel the ²⁹Si chemical shifts assigned to the T2m-site. The ²⁷Al and ²⁹Si chemical shifts for this series correlate well with composition-dependent lattice parameters, most notably cell volume and the angle [201]¹b. The linewidths of the ²⁹Si and ²⁷Al resonances indicate a significant amount of structural disorder in the intermediate compositions due to Na, K substitution. The 1 σ width of the distribution of average Si-O-T angles for each T-site is estimated to be about 1° for the Or33 sample. The average ²³Na δ_i varies monotonically from -8.5 (±1) ppm for albite to -24.3 (±1)ppm for Or83. Similarly, the average ²³Na nuclear quadrupole coupling constant decreases from 2.60 to 1.15 (±0.05) MHz and the asymmetry parameter of the electric field gradient increases from 0.25 to 0.6 with increasing K-content from albite to Or83. The observed variations in the quadrupole coupling parameters are consistent with simple electrostatic calculations. Higher resolution ²³Na spectra of the intermediate compositions obtained at 11.7 T indicate the presence of an inhomogeneous linebroadening which is related to the distribution of Na-environments. A model based on a random distribution of local compositions does not simulate the spectra, suggesting that the distribution of Na is skewed toward Na-rich clusters. Observation of the ²³Na NMR lineshape of Or49 after short periods of heat treatment indicate that ²³Na NMR is very sensitive to the changes in the Na, K distribution accompanying the early stages of exsolution. Reversible changes occur after heating at 530° C for 3 h, whereas heating at 600° C produces no changes, possibly bracketing the position of the coherent spinodal for Al, Si ordered alkali feldspars at this composition.  相似文献   

Sensitivity of crop yields and land resource potential to climatic change in Ontario,Canada     

Barry Smit  Michael Brklacich  Robert B. Stewart  Ray McBride  Murray Brown  Deborah Bond 《Climatic change》1989,14(2):153-174

Increasing concentrations of atmospheric CO₂ and other greenhouse gases are expected to contribute to a global warming. This paper examines the potential implications of a climatic change corresponding to a doubling of atmospheric concentrations of CO₂ on crop production opportunities throughout Ontario, a major food producing region in Canada. The climate is projected to become warmer and drier, but the extent of these shifts are expected to vary from region to region within Ontario. The effect of this altered climate on crop yields and the area of land capable of supporting specific crops varies according to region, soil quality and crop type. Most notable are the enhanced opportunities for grains and oilseeds in the northern regions, and the diminished production prospects for most crops in the most southerly parts of Ontario.  相似文献   

Radar observations of prevailing winds and waves in the Southern Hemisphere mesosphere and lower thermosphere     

A. Phillips  R. A. Vincent 《Pure and Applied Geophysics》1989,130(2-3):303-318

HF radar stations (utilizing the spaced-antenna partial-reflection technique) located at Adelaide (35°S, 138°E) and Mawson Station (67°S, 63°E) have observed horizontal mesospheric winds continuously since mid-1984. Observations in the period 1984–87 are compared with the Northern Hemisphere [latitude conjugate] stations of Kyoto (35°N, 136°E) and Poker Flat (65°N, 147°W), and with satellite-derived circulation models. Particular reference is made to the equinoctial changeovers in zonal flow and to the temporal and altitude variations in the planetary wave activity at Mawson and Adelaide.  相似文献   

The future relevance of medical geography for health planning,health and development in the third world     

David R. Phillips Dr.  Yola Verhasselt Dr. 《GeoJournal》1989,19(2):129-134

Conclusions: the Future Relevance of Medical Geography in the Third World This article has deliberately ranged widely and suggested various research themes to which medical geographers interested in health and development might turn their attention. The International Geographical Union Commission on Health and Development established in 1988 suggested a research agenda which includes many of them (see IGU Commission on Health and Development, Circular Letter No. 1 published in GeoJournal 17, 4, 659–660 (1988)). The achievement of even part of such an agenda will call for close international collaboration in research amongst medical geographers and allied disciplines.Increasingly, medical geographers are gaining applied experience in health and health care in the developing world. They are obtaining breadth and depth of knowledge and are now, for example, cogniscant of financial matters such as those involved in the cost explosion in health care worlwide which has particularly sinister implications for the health of Third World countries (Josephg and Phillips 1984). They, too, are now increasingly comfortable in dealing with epidemiological and demographic data. Geographers now no longer focus solely on phenomena such as distance decay or environments for disease. They are aware that human resources, intelligence, aspirations, attitudes and finance are all potent variables influencing successful health care and health in populations.In the future, therefore, the wide-ranging ambit of medical geography will increasingly become relevant to health and health care research in the Third World. Contributions of value will emerge both from those geographers adopting more socio-political stances and those adopting a more empiricist approach. However, it is the holistic nature of geography, with its wide academic links, and the courage of geographers to research in new topics and gain sound understanding of them which will increasingly be recognized. The days of extempore contributions to political, policy and practical debates on health and development are now largely past. Well researched, solid and sound medical geography contributions will, it is hoped, forge ahead.  相似文献   

Si,Al ordering in leucite by high-resolution 27Al MAS NMR spectroscopy     

Brian L. Phillips  R. James Kirkpatrick  Andrew Putnis 《Physics and Chemistry of Minerals》1989,16(6):591-598

High-resolution ²⁷Al MAS NMR spectra of natural leucite recorded at H ₀=11.7T contain three resolvable resonances at ²⁷Al δ _i = 69.2, 64.7, and 61.0±0.5 ppm. These three resonances are assigned to the three inequivalent framework positions of leucite: T3, T2, and T1, respectively. Fitting the observed spectra yields a Si,Al distribution for leucite in which approximately one-half of the Al is in T1 and one-quarter in each of T2 and T3. This Si,Al distribution differs substantially from those obtained by previous workers using ²⁹Si NMR spectroscopy and X-ray diffraction. New ²⁹Si NMR spectra and revision of previously reported ²⁹Si NMR peak assignments, however, make the ²⁷Al and ²⁹Si NMR results consistent. The ²⁷Al δ _i correlate linearly with the mean T-O-T′ bond angles of the average structure, which allows the peak assignments to be made. However, this correlation lies distinctly toward higher frequency and larger bond angles than correlations for Si,Al ordered aluminosilicates, suggesting that the mean T(Al)-O-T′(Si) bond angle for each site in leucite is smaller than the mean bond angle of the average structure, which is averaged over T(Al)-O-T′(Si) and T(Si)-OT′(Si,Al) angles.  相似文献   

Shape analysis of Pacific seamounts   总被引：2，自引：0，他引：2  

Deborah K. Smith 《Earth and Planetary Science Letters》1988,90(4):457-466

Shape statistics have been compiled from 85 profiles of well-surveyed Pacific seamounts in the height range 140–3800 m. A flat-topped cone was fit to each seamount's cross-sectional profile maintaining the slopes of the sides as closely as possible. On each profile a basal widthd_b, a summit widthd_t, and a maximum heighth, were measured. The height-to-basal-radius ratio isξ_h is estimated by the ratio2hd_b and flatnessf by the ratiod_td_b. Slope angleφ = arctan(ε) is estimated fromε =2h(d_b − d_t). Summit height and basal radius are found to be highly correlated (r = 0.93). The 85-point sample mean of the height-to-basal-radius ratio isξ_h = 0.21 ± 0.08 implying that a seamount's summit height is typically one fifth its basal radius. Despite the high correlation, individual points show some scatter, and there may be groupings into different morphological types. For example, all but one of the seamounts with summit heights above 1000 m have values ofξ_h that are larger than the sample mean. The 85-point sample mean of flatness isf = 0.31 ± 0.18. Data points show a large scatter with values off varying between 0 (a pointy cone) and 0.69 (a flat-topped cone). A histogram representation of flatness, however, indicates that certain values off may be more common than others: the histogram shows a bimodal distribution with maxima occurring at values off in the ranges 0.10–0.20 and 0.35–0.50. Moreover, there is some evidence that the mean flatness decreases with summit height so that the preferred shape of a large-sized seamount may be a pointy cone. Slope angle has an 85-point sample mean ofφ = 18 ± 6°; individual values ofφ vary between 5° and 36°. In addition to having a lower than average mean flatness seamounts with heights above 2600 m also have a lower than average mean slope angle (15°). To determine which variables account for most of the observed variation in the seamount shapes, a multivariate principal component analysis was performed on the data using five shape variables (summit height, basal radius, summit radius, flatness, and slope). The analysis indicates that most of the variation is described by two variables: flatness and summit height.  相似文献