A novel study on using geoelectrical resistivity, soil property, and hydrogeochemical analysis methods for delineating and mapping of heavy metal in aquifer system is presented in this paper. A total of 47 surveys of geoelectrical resistivity with Wenner configuration were conducted to determine the subsurface and the groundwater characteristics. The groundwater sample from 53 existing wells and 2 new wells has been analyzed to derive their water chemical content. The chemical analysis was done on the soil sample obtained from new two wells and from selected locations. The water and soil chemical analysis results from the new two wells were used as calibration in resistivity interpretation. The occurrence of heavy metal in aquifer system was expected to detect using the geoelectrical resistivity survey for the whole study area. The result of groundwater analysis shows that the groundwater sample contains a relatively low concentration of Fe (<?0.3 mg/L) elongating from the south up to the middle region. While in the middle and the northwestern, Fe concentration is relatively high (around 12 mg/L). Chemical analysis of soil sample shows that in the lower resistivity zone (<?18 Ωm), Al and Fe concentrations are comparatively high with an average of 68,000 and 40,000 mg/kg, respectively. Starting from the middle to the northwestern zone, the resistivity value appears to be low. It is definitely caused by higher Al and Fe concentration within the soil, and it is supported also by lower total anion content in the groundwater. While the resistivity value of more than 40 Ωm in aquifers is obtained in the zone which Fe concentration is relatively lower in the soil but not present in the groundwater. Correlation Fe concentration in the soil and Fe concentration in the groundwater sample shows the trend of positively linear; however, the Al concentration in soil has no correlation with Al content in groundwater. Finally, the probability of high heavy metal zone in the aquifer system is easily delineated by the distribution of geoelectrical resistivity presented in depth slice shapes which extend from the Boundary Range Composite Batholith in the north to the northwest. 相似文献
The assessment of hydrochemical quality of groundwater is very important to explore its nature and usefulness. In this paper, groundwater quality evaluation is carried out in the Balad district, Salah Al-Din Governorate, Iraq. A total of 28 groundwater samples are collected from shallow tube wells and analyzed for various physicochemical parameters. Groundwater suitability for drinking is evaluated based on the World Health Organization (WHO) and Iraqi standards, and suitability of groundwater for irrigation is assessed based on various hydrochemical parameters. The results reveal that the dominant types of groundwater based on piper diagram are mixed CaMgCl and CaCl. Gibbs ratio indicates that the groundwater in the studied area is affected by the evaporation process. The cation-anion exchange reaction in the studied area demonstrates that 54% of the groundwater samples indicate a direct base (cation-anion) exchange reaction, while 46% of the groundwater samples indicating the chloro-alkaline disequilibrium. Furthermore, generally all of the groundwater samples are unsuitable for drinking and irrigation. Cluster analysis reveals two different groups of similarities between the groundwater samples, reflecting different pollution levels in the studied area. 相似文献
Ras Abda plutonic suite, North Eastern Desert of Egypt, consists predominantly of Neoproterozoic calc-alkaline older granites. Minor exposures of pink microgranite are occurring along Wadi Ras Abda within the older granites. Previous studies on this area demonstrated that the microgranite is altered in some parts and contains anomalous concentrations of rare metal elements (Zr, Th, and U). These altered and mineralized zones are re-assessed using field observations, chemical analysis, and by the application of various transmitted light and electron microscopic techniques. The rare metals exist as mineral segregation grew freely into open cavities of the microgranite and concordant with the NNE strike-slip fault movement. The mineralized zones contain an assemblage of secondary magnetite, zircon, uranothorite, columbite-(Mn), fergusonite-(Y), and allanite-(Ce). The extreme abundance of zircon in the mineralized zone, along with other evidence, indicates a hydrothermal origin of this zircon together with associated rare metals. The geochemical investigation and mass balance calculations revealed extreme enrichment of Zr, Th, U, Y, Nb, Ta, and REE. Post-magmatic hydrothermal alterations resulted in such pronounced chemical and mineralogical heterogeneity. The hydrothermal fluids are thought to be oxidizing, alkaline and of medium temperature (>?250 °C). The average contents of the elements Zr (1606 ppm), Th (1639 ppm), U (306 ppm), Nb (955 ppm), and REE (1710 ppm) in the mineralized microgranite reach sub-economic levels and could be a potential source of these elements. 相似文献
Stability is the main problem in underground excavations that can result in rock-related accidents or closure of mines. This is often controlled by the geological condition of the rockmass and the in situ stress field where excavation is being carried out. Over the years, conventional support systems such as bolts, shotcrete and mesh have been the standard support systems used in difficult ground conditions to maintain stability of underground openings. The novel Thin Spray Liner (TSL) is a technology with an improvement in terms of support capabilities for difficult geological conditions. This technology is predicted to replace conventional support systems, as it offers a significant yielding capacity that is better than that of the traditional techniques of controlling strata. The performance of the TSL lies between that of shotcrete and wire mesh. The TSL has numerous advantages regarding rock reinforcement such as rapid curing period, fast application, high tensile strength, high adhesion properties that prevent movement of rock keyblocks, improved cycle times, reduction in material-handling compared to shotcrete, and a significant ability to penetrate joints. These advantages increase the allowance for mechanisation and improvement of safety in excavations. Despite various benefits of TSLs, there are shortcomings which make end-users to be sceptical about the technology. This study provides a detailed review of the mechanism, properties, composition and types, as well as the general and mining applications of TSLs. It also describes the challenges faced by the mining industry and other end-users in accepting the technology as a solution for stability issues in underground openings. In addition, some insightful suggestions are made as recommendations for future work on the development of suitable, effective and efficient thin surface rock support technology within limitations/constraints.
Remote sensing has revolutionized forest management and has been widely employed to model canopy gaps. In this study, a canopy height model (CHM) and an intensity raster (IR) derived from light detection and ranging (LiDAR) data were used to model canopy gaps within a four-year-old Eucalyptus grandis forest using an object-based image analysis (OBIA) approach. Model thematic accuracies using the CHM, intensity raster and combined data set (CHM and IR) were all above 90%, with KHAT values ranging from 0.88 to 0.96. Independent test thematic accuracies were also above 90%, with KHAT values ranging from 0.82 to 0.91. A comparative area-based assessment yielded accuracies ranging from 70 to 90%, with the highest accuracies achieved using the combined data set. The results of this study show that using a CHM and intensity raster, and an OBIA approach, provides a viable framework to accurately detect and delineate canopy gaps within a commercial forest environment. 相似文献
This study is mainly about the relationship of the moisture holding and release capacity of soils with their texture, particularly the clay fraction. Soil samples collected from various sites in the Sudan Gezira were analysed for physical and chemical properties and moisture characteristics. Generally the soils were clayey except the recent alluvium which was loamy. The pH was alkaline and the electric conductivity < 1.0 dS m–1. The studied soils were calcareous and very poor in organic matter, their intermediate to high water holding capacity being due mainly to the presence of large quantities of clay. Matric potentials of –0.4 to –1.5 MPa reduced soil moisture for all types of soils but the effects were not necessarily quantitatively equal. Permanent wilting point — moisture content at – 1.5 MPa — varied widely (10.5 – 22.0%) amongst the different soils and this was mainly attributed to texture and mineralogy of the soil clays. Bulk density decreased with increase in clay content. Calcium carbonate content was found to have no apparent relationship with the moisture content of these soils. The amount of silt fraction seems to have an overriding effect on the relationship between soil moisture availability in the recent alluvium soil and its subsequent release to growing plants. The results are discussed in relation to the phenomenon of mid-day stress observed in all grown crops of the Sudan Gezira. 相似文献
Observations taken by aircraft and conventional platforms are used to investigate dynamical, physical, and radiative processes within a marine stratus cloud during the Canadian Atlantic Storms Program (CASP) II field project which took place over the east coast of Canada. Stratus which formed over the ocean on February 6, 1992 during the nighttime, is studied to analyze cloud top and base processes. The cloud was supercooled during the study period. Fluctuations and fluxes are calculated along constant flight altitude legs approximately 100 km long in space. The scales of structures larger than 5 km are removed from the analysis using a running average technique. Droplet spectra obtained by a forward scattering spectrometer probe (FSSP) were used in a 1-D radiative transfer model to calculate infrared (IR) fluxes and radiative heating rates. A heat conservation equation was used to estimate vertical air velocity (wa) within the cloud. The results showed that, because of a warmer ocean surface, significant moisture and heat were transferred from the ocean surface to the boundary layer. The cloud base was at about 400 m height and the top was at about 1.4 km.wa at the cloud base was estimated about 5 cm s–1. Strong IR cooling rate at the cloud top was calculated to be 75°C day–1 for a 100 m thick layer. Negative skewness inwa, suggesting narrow downdrafts, was likely due to radiative cooling at the cloud top. The entrainment velocity was found to be about 1.5 cm s–1 at cloud top. Mean moisture and heat fluxes within the cloud were estimated to be comparable to those from the ocean surface. Vertical air velocity at the cloud top due to radiative cooling was found to be about –40 cm s–1. 相似文献
Geochemical patterns for elements, such as Sn, W and Au, present in drainage sediments as resistate heavy minerals are often erratic and difficult to interpret. To investigate the source of these problems and develop methods of eliminating them we have compared the behavior of Sn, present as cassiterite, and associated pathfinder elements downstream from a small primary Sn deposit in Perak, Peninsular Malaysia.Dispersion trains for the pathfinder elements are characterized by smooth decay patterns and differences in concentrations between high- and low-energy environments, characterized by coarse-and medium-grained sands respectively, are not significant. In contrast, Sn (and magnetite) concentrations are extremely erratic with significantly higher concentrations in high- compared to low-energy environments. As a result the dispersion train for Sn exhibits no regular decay pattern away from its source. These findings suggest that the action of the stream is analogous to that of sluice box, with light minerals being winnowed away and cassiterite, together with magnetite, accumulating. For all but the finest sizes this process, which is most efficient in high-energy environments, causes considerable local variability in Sn content of the sediments. However, because the hydraulic behavior of cassiterite and magnetite is similar, but magnetite is not associated with the primary mineralization, the Sn/magnetite ratio can be used to eliminate Sn anomalies resulting from local variations in hydraulic conditions.The concept of hydraulic equivalence of cassiterite and magnetite was extended to examining the relationship between Sn and different size fractions of the light minerals that constitute the bulk of most sediments. Greatest contrast is obtained when the Sn content of the −270 mesh (−53 μm) fraction is re-expressed as its hydraulic equivalent concentration in −65 + 100 mesh (−212 + 150 μm) material.For exploration purposes it is concluded that: (1) providing cassiterite is present in the fine size fractions, sampling of this material will reduce hydraulic effects, thereby reducing data variability, and can also increase the length of the anomalous dispersion train; and (2) hydraulic effects can also be reduced by re-expressing Sn concentrations as ratios to magnetite (provided this is not associated with the primary Sn mineralization) or a hydraulically equivalent size fraction of the light minerals that constitute the bulk of the sediment. Similar principles probably apply to the interpretation of geochemical data for other elements dispersed in drainage sediments as heavy minerals; this warrants further investigation. 相似文献
Ground penetrating radar (GPR) is one of the promising technologies that can be used to detect landmines. Many factors may affect the ability of GPR to detect landmines. Among those factors are: 1) the type of landmine material (metallic or plastic), 2) conditions of the host soil (soil texture and soil moisture), and 3) the radar frequency utilized. The impact of these factors on the ability of GPR to detect landmines is investigated by studying their effect on the dielectric permittivity contrast between the landmine and the host soil, as well as on the attenuation of the radar waves. The impact of each factor was theoretically reviewed and modeled using the Matlab and Mathcad software packages. Results of the computer modeling were correlated with GPR data acquired for metallic and plastic landmine types. It was found that the ability of GPR to detect landmines depends to a great extent on the landmine type, water content of the host soil, utilized radar frequency, and soil texture. The landmines are much easier to detect than plastic landmines for any soil conditions and any radar frequency. Increasing the soil's moisture content, regardless of soil texture, eases the detection of the plastic landmine and worsens the detection of the metallic mines. Increasing the percentage of clay in the soil causes the same effect as the moisture content. However, higher radar frequency delivers better results for landmine detection as long as the percentage of clay and the moisture content in the soil remains low. The results of this study are expected to help in selecting optimum radar antennae and data acquisition parameters depending on the landmine type and environmental conditions. 相似文献