Investigation of the elastic characteristics of a three-storey steel structure using system identification     

Izak Kaya  Hugh D. McNiven 《地震工程与结构动力学》1982,10(3):433-445

In this report, three different models in increasing order of complexity have been used to identify the seismic behaviour of a three-storey steel structure subjected to arbitrary forcing functions, all of which excite responses within the elastic range. All of the models are constructed using system identification. In the first model, five parameters have been used to identify the frame. Treating the system as a shear building, we assign one stiffness coefficient to each floor and introduce Rayleigh-type damping with two additional parameters. The mass, assumed to be concentrated at a floor level, is kept constant throughout the study. The parameters are established using a modified Gauss-Newton algorithm. The match between measured and predicted quantities is satisfactory when these quantities are restricted to floor accelerations or displacements. To remove the constraint imposed by assuming that the frame deforms as a shear building, a second model with eight parameters is introduced, allowing rotations of the joints as independent degrees of freedom. Six of the eight parameters are related to the stiffness characteristics of the structural members while the remaining two are related to damping as before. In constructing the eight-parameter model, we learned that it is the effective lengths of the members that change during optimization. We also found that the independent response quantities, floor accelerations and joint rotations, must be used in the cost function for the optimization algorithm to converge. The match between measured and predicted quantities for the eight-parameter model is excellent. The set of parameters derived from the minimum squared error gives a model that shows very good correlation using information on the full duration of the pulse or only a portion of it. Also the same correlation exists between the coefficients obtained from different excitations. In an effort to explain the values of the parameters associated with the girders, an additional degree of freedom, namely, the pitching motion of the shaking table, is introduced as an additional degree of freedom. The paper presents, therefore, a five-, an eight- and, finally, a nine-parameter model.  相似文献   

A conjugate strike-slip fault system within the extensional tectonics of Western Turkey     

Mustafa Aktar  Hayrullah Karabulut  Serdar Özalaybey  Dean Childs 《Geophysical Journal International》2007,171(3):1363-1375

Three main shocks M-1, M-2 and M-3 (17 October 2005 at 05:45 UTC, M _w 5.4; 17 October at 09:46 UTC, M _w 5.8 and 20 October at 21:40 UTC, M _w 5.9) and their associated aftershocks within the Gulf of S i ğac i k, 50 km southwest of Izmir, Turkey were studied in detail. A temporary seismic network deployed during the activity allowed the hypocentre of M-3 and subsequent aftershocks to be determined with high accuracy. A relative relocation technique was used to improve the epicentres of M-1 and M-2. All three main shocks have strike-slip mechanisms which agree with the linear trends of the aftershock locations. Two distinct zones were illuminated by the aftershock locations. The zones contain clear echelon patterns with slightly different orientations from the trend of the aftershock distribution. M-2 and M-3 ruptured along of the eastern rupture zone which aligns N45°E. However the strike direction of M-1 is not clearly identified. The alignment of the two rupture zones intersect at their southern terminus at an angle of 90°. The fault zones form conjugate pair system and static triggering is considered as a probable mechanism for the sequential west to east occurrence of M-1, M-2 and M-3. This earthquake sequence provides seismological evidence for conjugate strike-slip faulting co-existing within a region dominated by north–south extension and well-developed east–west trending normal faults.  相似文献   

Secondary dispersion from gold deposits in west Turkey     

Mi?raç Akçay  H.Mustafa Özkan  Charles J. Moon  Barry C. Scott 《Journal of Geochemical Exploration》1996,56(3):197-218

Orientation studies over the Sarpda? prospect in the Biga peninsula and the Arapdagi deposit near Izmir have provided elear evidence for elemental dispersion around west Turkish gold prospects. Although these deposits are of different types, silicification associated with the deposits results in the main part of both deposits forming topographic highs.At Sarpda? gold mineralisation is relatively weak compared with nearby prospects and associated with a silicified cap on the main hill. Comparison of coarse and fine fractions, based on a 190 μm size split of 8 kg of -2 mm material, suggests that gold disperses clastically on the steep slopes, probably within silica, but coarse grains break down giving Au concentrations in the finer fractions at the base of the main slope. Discrete gold grains, that can be panned, only occur 1–2 km downstream within the streams and heavy mineral concentrations are very limited. This interpretation of Au dispersion is consistent with the data from 1 kg samples collected at the higher primary grade, but more contaminated, Arapda?i prospect.Antimony is the most consistent pathfinder both for the silicified cap at Sarpda? and for gold-rich veins at Arpada?i. It gives high contrast anomalies. Arsenic is useful being more mobile than Sb, although contrast may be low. High resolution Ag data can be useful but base metal enrichments are also often associated with Ag anomalies. Most prospects have some base metal enrichments although they can be displaced from the main gold-rich parts of the deposit and anomalies may be weak. Lead and Cu are the more consistently useful elements.The use of large (> 8 kg of -2 mm material) samples produces consistent stream sediment data that can be used to reliably interpret single samples and quantify Au anomalies. A survey around the Halíköy Hg and Emirli Sb mines, using these large samples, confirmed the extension of the known gold-bearing Emirli structure. In contrast the major Hg-bearing Halíköy Fault is gold poor although a structure parallel to it is auriferous.  相似文献   

Interpretation of some gravity profiles from estern Sudan     

Mitwalli  Mustafa A. 《Pure and Applied Geophysics》1970,80(1):184-192

Summary Gravimetrically determined stations in the province of Kordofan, western Sudan, are interpreted. Boreholes and surface geology are employed, and a Gier Algol print-plot programme has been used. The interpretation shows that the granite mass increases in average thickness from 2000 m in the west to about 20000 m in the east. A dyke-like pattern of gneisses and schists is observed.The paper is forwarded by ProfessorSvend Saxov, Laboratory of Applied geophysics, University of Aarhus, Aarhus, Denmark.  相似文献   

Trace Metal Solid State Speciation in Aerosols of the Northern Levantine Basin,East Mediterranean   总被引：3，自引：0，他引：3  

Mustafa Koçak  Nilgun Kubilay  Barak Herut  Malcolm Nimmo 《Journal of Atmospheric Chemistry》2007,56(3):239-257

An established three stage sequential leach scheme was applied to a series of selected high volume aerosol samples (n = 35) collected from the Turkish Eastern Mediterranean coastline (Erdemli). Samples were selected according to their air mass back trajectory history to reflect the contrasting mixtures of aerosol material present in the Eastern Mediterranean marine aerosol. Two populations were adopted, those samples which were classed as “anthropogenic” and those which were “Saharan” dominated aerosol populations. Applying the three stage leach it was possible to define the proportion for each of the considered metals (Al, Fe, Cu, Pb, Cd, Zn and Mn) present in the (a) “exchangeable” (b) “carbonate / oxide” and (c) “refractory” phases, representing novel solid state aerosol speciation data for this marine system. Clear trends were established, conforming with data from previous studies with mainly crustal derived metals (Al and Fe) being present in the refractory phases (Al > 88%; Fe > 84%) and those influenced by anthropogenic sources being dominating in the exchangeable phase, although for these metals the variability was comparatively high (12–64%; 19–85%; 40–100% for Zn, Pb and Cd, respectively). For the majority, greater exchangeable fractions were present the lower the crustal source contribution to the aerosol population, whereas the “refractory” fraction exhibited contrasting behaviour. This was illustrated by the novel application of the mixing diagram, presenting each of the three speciation stages against the corresponding percent anthropogenic contribution to each collected sample. Zn, Pb and Cd all illustrated progressive decrease in the percent exchangeable with increasing crustal contribution to the aerosol population. The percent exchangeable was discussed in terms of its use to represent the upper limit of the bioavailable fraction of metal associated with the aerosol, post deposition. The mixing diagram approach enabled the prediction of the residual fractions for Cd, Pb and Zn (41 ± 4%; 62 ± 4% and 82 ± 5%, respectively,) in Saharan end-member material.  相似文献   

A statistical study of field-aligned electron beams associated with ion conies events     

W. Miyake  T. Mukai  N. Kaya 《Annales Geophysicae》1998,16(8):940-947

A statistical study of field-aligned electron beams associated with upflowing ion conics is presented from Exos-D (Akebono) observations below 10 000 km. The electron beams are narrowly collimated along the field line and generally have energies of several tens of eV. They are divided in the analysis into three types: upflowing, downflowing, and counterstreaming. All the types of electron beams are almost equivalent in their energy and pitch angle characteristics and their association rate with upflowing ion events. About 50% of ion conies are found to be coincident with field-aligned electron beams. There is also a correlation in energy between the field-aligned electrons and ion conics. These show that the association is not a mere coincidence but rather that the field-aligned acceleration of electrons is related to the perpendicular energization of ions. The association rate of upflowing electrons is high on the nightside, while that of downflowing electrons is high on the dayside. The association rate of downflowing electrons is high at low altitudes, and the rates of the three types of electron beams become equivalent at high altitudes. Data indicate that the height of the electron acceleration region is lower on the nightside. It is suggested that the average height of the electron acceleration region is around the satellite apogee (–10000 km), and the average thickness of the region is about thousands km.  相似文献   

A taxonomic study on the families Lepadellidae and Trichocercidae （Rotifera： Monogononta） of Turkey     

KAYA Murat ALTINDAG Ahmet 《中国海洋湖沼学报》2007,25(4):423-426

Thirteen rotifer species belonging to the families Lepadellidae and Trichocercidae were studied taxonomically from nine water bodies in Turkey. Lepadella biloba is a new entry to the Turkish rotifer fauna. All species were drawn under a light microscope using a camera lucida.  相似文献   

Effect of attachment configuration on the trapping efficiency of Vaseline-coated slide catchers for windblown particles     

Mustafa Basaran  Gunay Erpul  A. Ugur Ozcan  Pieter Bogman  Wim M. Cornelis  Donald Gabriels 《Environmental Earth Sciences》2010,61(7):1375-1384

There are various types of the windblown sediment traps developed for wind tunnel and field studies. One of the main supports expected from these traps is in measuring surface dust concentrations to appropriately derive flux equations. The measurement performance and accuracy of a trap is very important and depends strictly upon the physical characteristics and the behaviors of dust grains with air flows. This paper presents the measurement results of static pressure distribution (SPD) of wind flow around Vaseline-coated slide (VCS) catchers with an aim of finding out whether or not particle trapping efficiency (η) of the VCS is related to the SPD. The SPD was evaluated by a wind reduction coefficient (R _c) in a series of wind tunnel experiments with different VCS settings which have different attachment configurations on a pole. Three VCS configurations were considered: a configuration on a circular plastic pole (CPP) and two configurations on wooden square poles (WSP₁ and WSP₂, respectively). Thus, the primary contribution of this work was to experimentally analyze the effect of the different attachment configurations on the SPD, and the secondary objective was to determine the effect of the SPD on the η. It was shown that spatial correlation and spatial pattern of the R _c were different in the surrounding area of each configuration, and ANOVA and DUNCAN tests indicated that η(s) of WSP₁, WSP₂, and CPP were different at the significant level of P ≤ 0.05 with the mean of 0.94 ± 0.09, 0.63 ± 0.14, and 1.13 ± 0.07, respectively. Additionally, the amount of PM₂₀, PM₄₀, PM₆₀, PM₈₀, and PM₁₀₀ trapped by the configurations of WSP₁, WSP₂, and CPP considerably varied depending upon the particular aerodynamic circumstances associated with every configuration.  相似文献   

Local knowledge on plants and domestic remedies in the mountain villages of Peshkopia (Eastern Albania)     

Andrea Pieroni  Anely Nedelcheva  Avni Hajdari  Behxhet Mustafa  Bruno Scaltriti  Kevin Cianfaglione  Cassandra L. Quave 《山地科学学报》2014,11(1):180-193

Ethnobotanical studies in the Balkans are crucial for fostering sustainable rural development in the region and also for investigating the dynamics of change of Traditional Ecological Knowledge (TEK), which has broad-sweeping implications for future biodiversity conservation efforts. A survey of local botanical and medical knowledge and practices was conducted in four mountainous villages of the Peshkopia region in northeast Albania, near the Macedonian border. Snowball sampling techniques were employed to recruit 32 informants for participation in semi-structured interviews regarding the use of the local flora for food, medicinal, veterinary and ritual purposes. The uses of 84 botanical taxa were recorded as well as a number of other folk remedies for the treatment of both humans and livestock. Comparison of the collected data with another ethnobotanical field study recently conducted among Albanians living on the Macedonian side of Mount Korab shows a remarkable divergence in medicinal plant uses, thus confirming the crucial role played by the history of the last century in transforming TEK. Most noteworthy, as a legacy of the Communist period, a relevant number of wild medicinal taxa are still gathered only for trade rather than personal/familial use. This may lead to unsustainable exploitation of certain taxa (i.e. Orchis and Gentiana spp.) and presents some important conservation challenges. Appropriate development and environmental educational frameworks should aim to reconnect local people to the perception of limitation and renewability of botanical resources.  相似文献   

Fractures system within Dammam Dome and its relationship to the doming process,Eastern Saudi Arabia     

Mustafa M. Hariri 《Arabian Journal of Geosciences》2014,7(11):4943-4956

Dammam Dome is an oval-shaped structure that covers an area of about 500 km² and encompasses Al Khobar, Al Dhahran and part of Ad Dammam cities, east of Saudi Arabia. The dome characterizes by the presence of well developed fractures system that exposes at its apex and extends to its peripheries. Based on their size, trend and extent, fractures within Dammam Dome are divided into three types: regional (major) fractures, local (minor) fractures and very small size-localized fractures. This study discusses the criteria used in classifying those fractures, and the relationship of the regional (major) ones to the doming process. A model for the trends pattern of fracture is suggested for those fractures, and examined with the concentric and radial fracture pattern associated normally with dome structures. The suggested model is compatible and concordant with the dome model, which proves that the major fractures in the area are related to the dome emplacement and process. Outcomes and findings of this study are crucial for understanding the behavior and distribution of fractures associated with domes. Additionally, the suggested model of fractures and their trend pattern is important model in similar setting for hydrocarbon exploration and for any urban development and major constructions within the Dome vicinities.  相似文献