Parabolic Wave Propagation Modelling in Orthogonal Coordinate Systems     

袁德奎  林斌良肖鸿 《中国海洋工程》2004,18(3):445-456

This paper presents a numerical model study of the propagation of water waves using the parabolic approximation of the mild-slope equation in the orthogonal coordinate system. Two types of coordinate systems are studied: (a) a general form of orthogonal coordinate system and (b) the conformal system, a special form of orthogonal coordinate system. Two typical examples, namely, expanded breakwaters and a circular channel, are studied to validate the model. First, the examples are studied by use of the general orthogonal coordinates. Then the same examples are computed by use of the confonnal system. The computational results show that the confonnal coordinate system generally gives better predictions than the general orthogonal system. A numerical technique for generating the conformal grid is combined with the numerical model to improve the practicability of the model. The comparison between the result from the numerical grid system and that from the analytical grid system shows that reliable computational results can be obtained by use of the numerical confonnal grid system.  相似文献   

无机碳与雨生红球藻(Haematococcus pluvialis)细胞调节物质   总被引：4，自引：0，他引：4  

刘建国  孙艳妮  殷明焱  刘伟  张展 《海洋与湖沼》2004,35(5):459-466

以单细胞雨生红球藻为材料，采用酸碱滴定和CO2加富通气培养微藻的方法，对旧液中HCO3^-和CO3^2-浓度变化以及对红球藻细胞生长的影响进行了研究。结果表明，旧液具有限制红球藻细胞生长和诱导细胞转化的作用。同时，旧液中无机碳离子浓度明显高于新液。培养液中富含CO3^2-时，各细胞数量与CO3^2-浓度呈正相关，相关系数为0．88。溶液中仅有HCO3^-时，各细胞数与HCO3^-浓度也呈正相关性。因此，排除了CO3^2-和HCO3^-作为旧液中的调节物质，限制红球藻细胞生长和诱导细胞转化的可能性。旧液乙酸乙酯提取物生物检测实验表明，在粗提取物中有降低细胞增长和诱导细胞转化的活性，表明调节物质能溶于有机相，也反过来证实无机碳离子不是旧液中的调节物质。DNA含量和倍性分析结果表明，红球藻游动细胞DNA复制可以加倍后不经过原生质分裂就可以再次进行，因此推测旧液中的调节物质对原生质分裂过程产生抑制作用，而不对DNA复制过程产生抑制作用。  相似文献   

Optimizing interpolation of shoot density data from a Posidonia oceanica seagrass bed   总被引：1，自引：0，他引：1  

Michele Scardi  Lorenzo A. Chessa  Eugenio Fresi  Antonio Pais  & Simone Serra 《Marine Ecology》2006,27(4):339-349

A case study on the optimization of Posidonia oceanica density interpolation, using a data set from a large meadow at Porto Conte Bay (NW Sardinia, Italy), is presented. Ordinary point kriging, cokriging and a weighted average based on inverse square distance were used to interpolate density data measured in 36 sampling stations. The results obtained from different methods were then compared by means of a leave‐one‐out cross‐validation procedure. The scale at which interpolation was carried out was defined on the basis of the Hausdorff dimension of the variogram. Optimizing spatial scale and data points search strategy allowed obtaining more accurate density estimates independently of the interpolation method.  相似文献   

一种带自由面的三维船体贴体网络的数值生成     

李廷秋  缪国平  刘应中 《海洋工程》1996,(1)

本文提出了一个生成自由面的三维船体贴体网格的数值方法。文中以静水面以上的船体型线作为描述非定常自由面的计算网格域，进一步完善了我们以往开发的无法考虑兴波与静水面以上的船体型线相互作用对船舶粘性流动影响的网格生成方法。静水面以上的初始自由面网格分别沿船面法线η及切线ζ方向的曲线长的指数进行分布，即可极方便地调节自由面在船面及静水面附近的网格间距，也保证了在数值离散三维Ｐｏｉｓｓｏｎ方程时具有相当好的收敛性。这种方法的特点是计算量相当小，尤其能极方便地控制网格在船面簿粘性层中及静水面附近的分布。以Ｓｅｒｉｅｓ６０船模作为计算算例，带自由面的网格分布是相当满意的  相似文献   

断阶型潜山带地质模型的建立及储层预测--以CG20潜山为例     

姜素华  王永诗  张家震  王军 《中国海洋大学学报(自然科学版)》2004,34(3):437-445

以 CG2 0潜山为例 ,从建立地质模型入手 ,包括地层模型、构造模型、储集模型、储盖组合模型、速度模型等 ,认识到各套地层分布和储层物性的差异均与地震响应密切相关 ,因此可以利用地震波的信息 ,预测潜山储层的发育及分布情况。在对 CG2 0潜山进行精细全三维构造解释的基础上 ,探讨性地应用了测井约束反演、吸收系数、相干分析及三维模式识别等技术 ,对潜山储层进行了预测 ,从而提高了潜山勘探的效益 ,并为类似断阶型潜山带的勘探提供了成功的经验 ,具有一定的指导意义。  相似文献   

ECOM模式在丁字湾的应用   总被引：3，自引：3，他引：3  

张越美  孙英兰 《中国海洋大学学报(自然科学版)》2001,31(5):659-665

应用河口、陆架和海洋模式 (ECOM模型 ) ,引入干湿网格法模拟潮滩涨落的改进 ,并建立丁字湾及近岸海域的三维变动边界潮流模型。该模型考虑了湾口拦门沙、湾内水道和人工围海等地形特点。计算结果与实测值比较符合良好 ,较好地刻画出丁字湾 M2 分潮潮流场的时空分布特点。  相似文献   

Optimum Sample Size to Detect Perturbation Effects: The Importance of Statistical Power Analysis – A Critique     

Marco Ortiz 《Marine Ecology》2002,23(1):1-9

Abstract. The current article describes statistical power analysis as an efficient strategy for the estimation of the optimum sample size. The principle aim is constructively to criticise and enrich the results presented by Mouillot et al. (1999) , who estimate the optimum sample size for evaluating possible perturbations. The authors did not make any reference to statistical power analysis, even though their objective clearly went beyond a simple stock evaluation to assess management strategies in a particular marine ecosystem. Surprisingly, they proposed (a priori) an ANOVA design to test a hypothesis considering both space and temporal scales. However, the authors did not cover important topics related with power analysis and the precautionary principle, both used into environment impact assessment programmes for marine ecosystems. Based on their results and on statistical power analysis, it is demonstrated that the variability (dispersion statistics), a key factor they used to estimate the sample size, is less relevant than the magnitude of perturbation (effect size). Therefore, a greater effort must be devoted to estimate the effect size of a particular phenomenon rather than a desired variability.  相似文献   

3D gravity modelling for Anyongbok Seamount in the East Sea     

Moo Hee Kang  Hyun-Chul Han  Hyesu Yun  Gee Soo Kong  Kyong O. Kim  Youn Soo Lee 《Marine Geophysical Researches》2007,28(3):257-269

A seamount chain with an approximately WNW trend is observed in the northeastern Ulleung Basin. It has been argued that these seamounts, including two islands called Ulleung and Dok islands, were formed by a hotspot process or by ridge related volcanism. Many geological and geophysical studies have been done for all the seamounts and islands in the chain except Anyongbok Seamount, which is close to the proposed spreading ridge. We first report morphological characteristics, sediment distribution patterns, and the crustal thickness of Anyongbok Seamount using multibeam bathymetry data, seismic reflection profiles, and 3D gravity modeling. The morphology of Anyongbok Seamount shows a cone shaped feature and is characterized by the development of many flank cones and flank rift zones. The estimated surface volume is about 60 km³, and implies that the seamount is smaller than the other seamounts in the chain. No sediments have been observed on the seamount except the lower slope, which is covered by more than 1,000 m of strata. The crustal structure obtained from a 3D gravity modeling (GFR = 3.11, SD 3.82 = mGal) suggests that the seamount was formed around the boundary of the Ulleung Plateau and the Ulleung Basin, and the estimated crustal thickness is about 20 km, which is a little thicker than other nearby seamounts distributed along the northeastern boundary of the Ulleung Basin. This significant crustal thickness also implies that Anyongbok Seamount might not be related to ridge volcanism.  相似文献   

Modelling morphological processes in the vicinity of shore-parallel breakwaters     

Julio A. Zyserman  Hakeem K. Johnson 《Coastal Engineering》2002,45(3-4)

  相似文献   

Design of a 3D Chirp Sub-bottom Imaging System     

Jonathan M. Bull  Martin Gutowski  Justin K. Dix  Timothy J. Henstock  Peter Hogarth  Timothy G. Leighton  Paul R. White 《Marine Geophysical Researches》2005,26(2-4):157-169

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.  相似文献