京津冀地区气溶胶时空分布及与城市化关系的研究   总被引：2，自引：1，他引：1  

张西雅  扈海波 《大气科学》2017,41(4):797-810

利用AERONET（AErosol RObotic NETwork）数据对2008~2012年Terra MODIS（MOderate-resolutionImaging Spectroradiometer）C006 3 km卫星遥感气溶胶产品在京津冀地区的适用性进行了验证,分析京津冀地区3km分辨率气溶胶光学厚度（AOD）的时空分布和变化特征。利用DMSP（Defense Meteorological Satellite System）/OLS（Operational Linescan System）夜间灯光数据作为城市化评价手段,对京津冀地区城市化与AOD时空分布之间的关系进行了研究。结果表明:（1）MODIS 3 km气溶胶产品遥感反演数据和同期AERONET监测数据在研究区具有很好的一致性,相关系数达0.91,满足期望要求;（2）时间上,2008~2012年研究区年平均AOD值在0.361~0.453之间变化,年际间变化浮动大,总体呈下降趋势;AOD春季呈明显下降趋势,夏季总体呈微弱上升趋势,秋季和冬季呈明显上升趋势;（3）空间上,2008~2012年北京、天津和河北中南部的AOD值较高,河北北边AOD值较低;四季AOD空间分布呈现较强烈季节变化,夏季最高,冬季最低;（4）夜间灯光数据和AOD时空分布不仅在空间分布上呈现较好的一致性,且2008~2012年二者的地理权重回归（GWR）模型拟合度R2达0.8左右。研究区内AOD与夜间灯光数据二者相关性显著,城市化发展水平和人类活动对气溶胶的分布有着明显的影响。  相似文献   

利用辐射数据构建云物理结构     

霍娟 《大气科学》2018,42(5):1013-1022

本文运用CloudSat卫星上搭载的雷达探测数据和AQUA卫星搭载的辐射光谱仪探测数据,选择2007年1月至2010年12月期间,地理位置位于（15°~45°N,145°~165°E）区域内（远海）发生的云场数据开展分析,研究云的物理结构特征与其光谱辐射特性的相互关系。不同光谱波段对云物理结构变化的响应情况各有不同,首先从MODIS光谱仪22个云相关光谱波段中分析并选择出与云物理结构特征密切相关的光谱组合（包含13个波段）,而后开展了这些光谱波段的云辐射特性与云物理结构特征的相互变化关系研究。统计分析表明,在外部大气、地表条件以及太阳入射辐射变化不大情况下,云的结构变化与其光谱辐射变化之间总体存在单调相关关系,物理结构变化不大的云廓线之间其光谱辐射的变化也小,反之也成立,即光谱辐射变化小的云廓线之间物理结构变化也小。从而,对于某些内部物理结构特征未知的云,利用与其光谱辐射特性相近的云结构数据可实现自身垂直结构信息的重建。基于光谱辐射相近则云物理结构很可能相近的特点,本文对未知云场的物理结构重建开展了模拟试验,试验结果表明光谱相近原则匹配物理结构的方法一定程度上能够实现云物理结构的构建,为利用被动遥感数据推测云物理结构特征研究提供参考。  相似文献   

基于Oracle的高光谱影像数据库研究     

孙婷  张立朝  唐汉松  赵鹏  王青山 《北京测绘》2007,(2):1-4,8

为有效地组织和管理高光谱影像,本文提出了基于Oracle数据库平台的高光谱影像存储和管理的解决方案。基于对象关系-模型设计了光谱数据表组+属性数据表组的存储规范以及波段独立顺列式、波段集中整合式以及表单位式的三种存储模式。采用地形瓦片和影像金字塔的快速索引结构设计和建立了高光谱影像数据库的原型。  相似文献   

Predicting the elastic response of organic‐rich shale using nanoscale measurements and homogenisation methods          下载免费PDF全文

M. Goodarzi  M. Rouainia  A.C. Aplin  P. Cubillas  M. de Block 《Geophysical Prospecting》2017,65(6):1597-1614

  相似文献   

基于主成分降维的总悬浮物浓度遥感估算模型适用性分析     

郭宇龙  李云梅  吕恒  王珊珊  王永波 《湖泊科学》2013,25(6):892-899

总悬浮物浓度(C_TSM)是水质评价的重要参数.为了提高内陆Ⅱ类水体总悬浮物浓度估算的精度,利用主成分分析方法对2009年4月太湖水体实测高光谱数据进行降维处理,进而以不同数量的主成分作为变量,分别构建总悬浮颗粒物浓度的多元线性回归估算模型并比较这些模型的效果,从而确定最优的主分量个数;结合近年运行的高光谱传感器,对模型的适用性进行评价.结果表明:①前三个主成分(PC₁、PC₂、PC₃)从不同侧面涵盖了悬浮物浓度信息,它们与ln(C_TSM)的相关系数分别为0.728、0.401和0.403;②当主成分个数为6时,模型达到最优;模型的精度高于4个传统经验模型;③在400~850 nm之间,波段数大于45的高光谱传感器数据都能利用主成分分析的方法构建精度较高的总悬浮物浓度估算模型;此外,MERIS、HJ1-HSI、Hyperion和CHRIS这些常用的高光谱传感器的波段设置,都适合于主成分建模.  相似文献   

基于多源异构数据的粮食作物种植面积提取          下载免费PDF全文

李国庭  王德强  赵德良  李泺  刘昊  王元美  何孟桥 《山东国土资源》2022,38(8)

利用遥感影像进行农作物面积提取已经普遍应用到农作物种植面积提取工作中,但是普遍存在着提取效率低,精度达不到生产要求。随着高分辨率传感器的相继问世,融合多平台遥感数据有利于提高分类和动态监测的精度。本文以日照市莒县粮食种植面积提取为例,融合多时相和多源异构数据,利用深度学习算法提取粮食种植区域,深入挖掘多源数据的互补效应,提出了融合多时段、多源地理信息提取农作物种植面积的方法,为实现农作物种植面积快速高效的提取奠定了基础。  相似文献   

Scattering pattern analysis and true-amplitude generalized Radon transform migration for acoustic transversely isotropic media with a vertical axis of symmetry     

Quan Liang  Wei Ouyang  Weijian Mao  Shijun Cheng 《Geophysical Prospecting》2020,68(4):1211-1227

In multi-parameter ray-based anisotropic migration/inversion, it is essential that we have an understanding of the scattering mechanism corresponding to parameter perturbations. Because the complex nonlinearity in the anisotropic inversion problem is intractable, the construction of true-amplitude linearized migration/inversion procedures is needed and important. By using the acoustic medium assumption for transversely isotropic media with a vertical axis of symmetry and representing the anisotropy with P-wave normal moveout velocity, Thomsen parameter δ and anelliptic parameter η, we formalize the linearized inverse scattering problem for three-dimensional pseudo-acoustic equations. Deploying the single-scattering approximation and an elliptically anisotropic background introduces a new linear integral operator that connects the discontinuous perturbation parameters with the multi-shot/multi-offset P-wave scattered data. We further apply the high-frequency asymptotic Green's function and its derivatives to the integral operator, and then the scattering pattern of each perturbation parameter can be explicitly presented. By naturally establishing a connection to generalized Radon transform, the pseudo-inverse of the integral operator can be solved by the generalized Radon transform inversion. In consideration of the structure of this pseudo-inverse operator, the computational implementation is done pointwise by shooting a fan of rays from the target imaging area towards the acquisition system. Results from two-dimensional numerical tests show amplitude-preserving images with high quality.  相似文献   

Coal top detection by conductively guided borehole radar wave imaging for open cut blast-hole drilling     

Binzhong Zhou  Matthew van de Werken  Jianjian Huo 《Geophysical Prospecting》2020,68(3):982-998

Damage to the top of coal seams, caused by incorrect blast stand-off distances, results in coal losses of up to 10–15% to the Australian open cut coal mining operations. This is a serious issue to be addressed. Here we propose to use a new forward-looking imaging technique based on the borehole radar technology to predict the coal seam top in real time while drilling blast holes. This is achieved by coupling the conventional borehole radar waves on to a steel drill rod to induce a guided wave along the axial drill rod. The drill rod ahead of the borehole radar behaves as a forward-looking antenna for the guided waves. Both numerical modelling and field trials simulating a drill rod as an antenna are used to investigate the feasibility of the proposed technique for prediction of the coal top under typical open cut environments. Numerical modelling demonstrated that conductivity of the overburden is the most important factor affecting our ability to see coal seams ahead of the drill bit, the guided borehole radar waves could be used for top coal prediction and a theoretical prediction error less than 10 cm and a forward-looking capability of 4–6 m can be achieved. Field trials at Australian open cut coal mines also demonstrated that guided borehole radar waves can be observed and used for prediction of coal top ahead of drill bit during blast-hole drilling in resistive, open cut environments (the average resistivity should be higher than 75 Ωm).  相似文献   

The effectiveness of a pseudo-inverse extended Born operator to handle lateral heterogeneity for imaging and velocity analysis applications     

Abdullah Alali  Bingbing Sun  Tariq Alkhalifah 《Geophysical Prospecting》2020,68(4):1154-1166

Wave equation–based migration velocity analysis techniques aim to construct a kinematically accurate velocity model for imaging or as an initial model for full waveform inversion applications. The most popular wave equation–based migration velocity analysis method is differential semblance optimization, where the velocity model is iteratively updated by minimizing the unfocused energy in an extended image volume. However, differential semblance optimization suffers from artefacts, courtesy of the adjoint operator used in imaging, leading to poor convergence. Recent findings show that true amplitude imaging plays a significant role in enhancing the differential semblance optimization's gradient and reducing the artefacts. Here, we focus on a pseudo-inverse operator to the horizontally extended Born as a true amplitude imaging operator. For laterally inhomogeneous models, the operator required a derivative with respect to a vertical shift. Extending the image vertically to evaluate such a derivative is costly and impractical. The inverse operator can be simplified in laterally homogeneous models. We derive an extension of the approach to apply the full inverse formula and evaluate the derivative efficiently. We simplified the implementation by applying the derivative to the imaging condition and utilize the relationship between the source and receiver wavefields and the vertical shift. Specifically, we verify the effectiveness of the approach using the Marmousi model and show that the term required for the lateral inhomogeneity treatment has a relatively small impact on the results for many cases. We then apply the operator in differential semblance optimization and invert for an accurate macro-velocity model, which can serve as an initial velocity model for full waveform inversion.  相似文献   

Potential of legacy 2D seismic data for deep targeting and structural imaging at the Neves–Corvo massive sulphide-bearing deposit,Portugal     

George A. Donoso  Alireza Malehmir  Nelson Pacheco  Vitor Araujo  Matthew Penney  Joao Carvalho  Bill Spicer  Steve Beach 《Geophysical Prospecting》2020,68(1):44-61

Seismic methods are becoming an established choice for deep mineral exploration after being extensively tested and employed for the past two decades. To investigate whether the early European mineral-exploration datasets had potential for seismic imaging that was overlooked, we recovered a low-fold legacy seismic dataset from the Neves–Corvo mine site in the Iberian Pyrite Belt in southern Portugal. This dataset comprises six 4–6 km long profiles acquired in 1996 for deep targeting. Using today's industry-scale processing algorithms, the world-class, ca. 150 Mt, Lombador massive sulphide and other smaller deposits were better imaged. Additionally, we also reveal a number of shallow but steeply dipping reflections that were absent in the original processing results. This study highlights that legacy seismic data are valuable and should be revisited regularly to take advantage of new processing algorithms and the experiences gained from processing such data in hard-rock environments elsewhere. Remembering that an initial processing job in hard rock should always aim to first obtain an overall image of the subsurface and make reflections visible, and then subsequent goals of the workflow could be set to, for example understanding relative amplitude ratios. The imaging of the known mineralization implies that this survey could likely have been among one of the pioneer studies in the world that demonstrated the capability of directly imaging massive sulphide deposits using the seismic method.  相似文献