基于GIS的石家庄市雾霾分析     

苏亚聪  史娟  徐爽 《北京测绘》2020,(2):233-237

为了得出雾霾气象成因机制、影响因素和时空分布特征,以石家庄市区与郊县为研究区域,将2013年9月至2016年12月石家庄市各市区、郊县的PM2.5历史监测数据中的有效数据进行了数据分析处理得到雾霾浓度数据,还有温度、降水、风速、地形和人口密度等数据,运用GIS分析的方法,模拟绘制石家庄雾霾的时空分布图、雾霾与各影响因子的专题对比图,得到雾霾形成机制的因子、雾霾的时空分布规律、雾霾季节变化特征、雾霾与地形间的关系等;运用数据分析软件OriginPro8.SR3分析雾霾浓度与风速数据、降雨数据、温度数据间的相关性。  相似文献   

Developing constitutive models from EPR‐based self‐learning finite element analysis          下载免费PDF全文

Ali Nassr  Akbar Javadi  Asaad Faramarzi 《国际地质力学数值与分析法杂志》2018,42(3):401-417

A constitutive model that captures the material behavior under a wide range of loading conditions is essential for simulating complex boundary value problems. In recent years, some attempts have been made to develop constitutive models for finite element analysis using self‐learning simulation (SelfSim). Self‐learning simulation is an inverse analysis technique that extracts material behavior from some boundary measurements (eg, load and displacement). In the heart of the self‐learning framework is a neural network which is used to train and develop a constitutive model that represents the material behavior. It is generally known that neural networks suffer from a number of drawbacks. This paper utilizes evolutionary polynomial regression (EPR) in the framework of SelfSim within an automation process which is coded in Matlab environment. EPR is a hybrid data mining technique that uses a combination of a genetic algorithm and the least square method to search for mathematical equations to represent the behavior of a system. Two strategies of material modeling have been considered in the SelfSim‐based finite element analysis. These include a total stress‐strain strategy applied to analysis of a truss structure using synthetic measurement data and an incremental stress‐strain strategy applied to simulation of triaxial tests using experimental data. The results show that effective and accurate constitutive models can be developed from the proposed EPR‐based self‐learning finite element method. The EPR‐based self‐learning FEM can provide accurate predictions to engineering problems. The main advantages of using EPR over neural network are highlighted.  相似文献   

解郁安神法联合体外反搏对PCI术后气滞血瘀型胸痹患者的临床疗效观察          下载免费PDF全文

王敏  徐新利  姜光萍 《应用海洋学学报》2020,36(12):1

目的：观察解郁安神法联合体外反搏（EECP）对经皮冠状动脉介入治疗（PCI）术后气滞血瘀型胸痹患者的临床疗效。方法：将80例冠心病PCI术后气滞血瘀型胸痹患者随机分为治疗组和对照组,每组各40例。对照组采用PCI术后规范化治疗,同时联合EECP治疗;治疗组在对照组基础上加服解郁安神方治疗,随访观察7周,比较2组临床证候疗效、Zung焦虑自评量表（SAS）评分、抑郁自评量表（SDS）评分、西雅图心绞痛调查量表（SAQ）评分。结果：总有效率治疗组为82.5%（33/40）,高于对照组的60.0%（24/40）,2组比较,差异有统计学意义（P<0.05）;2组SAS、SDS、SAQ评分治疗前后组内比较及治疗后组间比较,差异均有统计学意义（P<0.05）。结论：解郁安神法联合EECP治疗可明显改善PCI术后气滞血瘀型胸痹患者的临床症状,缓解焦虑抑郁程度,提高患者生活质量,值得临床推广应用。  相似文献   

利用短期静态PPP结果反演海潮负荷位移     

魏国光  王琪洁  彭葳  郭良琦 《大地测量与地球动力学》2019,39(6):607-612

采用香港11个GPS测站的观测资料进行1 h、2 h、3 h和4h静态PPP解算，获得4组PPP坐标序列，利用调和分析求取11个测站处8个主要分潮的负荷位移参数（振幅和相位），将其与海潮模型计算的负荷位移参数进行对比，并比较分析PPP反演值与海潮模型值改正海潮负荷信号的效果。结果表明，垂直和水平方向上，不同PPP结果反演8个分潮的负荷位移分别具有约5 mm和7 mm的差异；PPP反演8个分潮垂向负荷位移优于全球海潮模型，但水平方向上的反演效果稍弱。  相似文献   

Wave energy conversion under constrained wave-by-wave impedance matching with amplitude and phase-match limits     

《Applied Ocean Research》2019

This paper investigates an approach to limit the fullness of ‘tuning’ provided by wave-by-wave impedance matching control of wave energy devices in irregular waves. A single analytical formulation based on the Lagrange multiplier approach of Evans [1] is used to limit the velocity amplitude while also limiting the closeness of the phase match between velocity and exciting force. The paper studies the effect of the present technique in concurrently limiting the device velocity and the required control/actuation force. Time domain application requires wave-profile prediction, which here is based on a deterministic propagation model. Also examined in the time domain is the effect of possible violation of the displacement constraint, which for many designs implies impacts at hard stops within the power take-off mechanism. Time domain simulations are carried out for a 2-body axisymmetric converter (with physical end-stops) in sea states reported for a site off the US east coast. It is found that the approach leads to effective power conversion in the less energetic sea states, while as desired, considerable muting of the optimal response is found in the larger sea states. Under the assumptions of this work, the end-stop collisions are found to have a minor effect on the power conversion. The present approach could be used to guide the design of power take-off systems so that their displacement stroke, maximum force, and resistive and reactive power limits are well-matched to the achievable performance of a given controlled primary energy converter.  相似文献   

Solution for a plane strain rough‐walled hydraulic fracture driven by turbulent fluid through impermeable rock          下载免费PDF全文

N. Zolfaghari  E. Dontsov  A. P. Bunger 《国际地质力学数值与分析法杂志》2018,42(4):587-617

The impact of turbulent flow on plane strain fluid‐driven crack propagation is an important but still poorly understood consideration in hydraulic fracture modeling. The changes that hydraulic fracturing has experienced over the past decade, especially in the area of fracturing fluids, have played a major role in the transition of the typical fluid regime from laminar to turbulent flow. Motivated by the increasing preponderance of high‐rate, water‐driven hydraulic fractures with high Reynolds number, we present a semianalytical solution for the propagation of a plane strain hydraulic fracture driven by a turbulent fluid in an impermeable formation. The formulation uses a power law relationship between the Darcy‐Weisbach friction factor and the scale of the fracture roughness, where one specific manifestation of this generalized friction factor is the classical Gauckler‐Manning‐Strickler approximation for turbulent flow in a rough‐walled channel. Conservation of mass, elasticity, and crack propagation are also solved simultaneously. We obtain a semianalytical solution using an orthogonal polynomial series. An approximate closed‐form solution is enabled by a choice of orthogonal polynomials embedding the near‐tip asymptotic behavior and thus giving very rapid convergence; a precise solution is obtained with 2 terms of the series. By comparison with numerical simulations, we show that the transition region between the laminar and turbulent regimes can be relatively small so that full solutions can often be well approximated by either a fully laminar or fully turbulent solution.  相似文献   

“地理素养与测绘技能”双驱动的GIS专业大学生创新能力培养模式的探索     

蔡忠亮  翁敏  苏世亮  亢孟军  费腾  田晶  任福 《测绘通报》2020,(8):148-152

在信息技术快速发展和万众创新、大众创业的时代背景下，创新与创新人才已成为国家发展的重要推动力，创新教育和创新人才培养成为高校的重要任务。本文以武汉大学地理信息科学（GIS）专业为例，结合专业特点和优势，探索了"地理素养、测绘技能"驱动下的GIS专业大学生创新能力的培养模式和"厚基础、重知识、强技能"的贯通式培养途径。围绕创新人才培养和成长的内在因素和外部条件，从人才培养方案与课程体系、创新型教师团队与新型教学方法、教学科研创新平台与创新条件、创新人才发展评价与激励机制等4个方面开展了创新型发展探索。结合实践表明，本模式取得了显著的创新成果，产生了良好的示范辐射作用。  相似文献   

基于熵权TOPSIS模型的海岛地区资源环境承载力研究——以舟山普陀区、定海区为例   总被引：2，自引：0，他引：2  

徐文斌  郭灿文  王晶  程义远  徐鹏杰  张宏晔 《海洋通报》2018,(1):9-16

随着海洋强国、"一带一路"、生态文明建设等国家战略的不断推进,海岛在国家政治、军事、经济、社会、生态中的地位不断提高,海岛开发、利用的规模越来越大,其生态保护也面临着新的挑战。本文依据资源环境承载力内涵,兼顾海岛资源环境特点,研究形成海岛地区资源环境承载力评价指标体系,综合应用熵权法、TOPSIS(逼近理想解排序方法)模型评价了典型海岛地区——普陀区与定海区2009-2015年间的资源环境承载力状况,结果表明:普陀和定海资源环境承载力水平呈稳步提升趋势,各个时期的环境保护政策和节能减排相关措施在环境保护与污染治理等方面起到了较为积极的作用。最后,在基于生态系统的海岛综合管理框架内提出了对策建议。  相似文献   

Wave tank and bench-top control testing of a wave energy converter     

《Applied Ocean Research》2019

An increasing number of experiments are being conducted to study the design and performance of wave energy converters. Often in these tests, a real-time realization of prospective control algorithms is applied in order to assess and optimize energy absorption as well as other factors. This paper details the design and execution of an experiment for evaluating the capability of a model-scale WEC to execute basic control algorithms. Model-scale hardware, system, and experimental design are considered, with a focus on providing an experimental setup capable of meeting the dynamic requirements of a control system. To more efficiently execute such tests, a dry bench testing method is proposed and utilized to allow for controller tuning and to give an initial assessment of controller performance; this is followed by wave tank testing. The trends from the dry bench test and wave tank test results show good agreement with theory and confirm the ability of a relatively simple feedback controller to substantially improve energy absorption. Additionally, the dry bench testing approach is shown to be an effective and efficient means of designing and testing both controllers and actuator systems for wave energy converters.  相似文献   

Damage assessment for submarine photoelectric composite cable under anchor impact     

《Applied Ocean Research》2018

The impact of dropped anchor on submarine photoelectric composite cables may possibly cause electrical faults, i.e. electricity and optical signal transmission failure. In order to study the impact capacity and structural impact failure mechanism, a test setup is designed originally to examine the structural and functional integrity. A detailed finite element model (FEM) is created, considering material nonlinearity and component interaction. A parametric analysis has been performed to predict the deformation of components and impact forces, under different impact velocities and collision directions. Relationships between the armor layer indentation rate and that of internal power and optical units are achieved. The impact deformation of internal entities can be evaluated intuitively by armor layer indentation. The proposed experimental and numerical methods are well correlated, suitable to assess the impact capacity of subsea power cables and assist the protection design of subsea power cables in engineering.  相似文献