Signatures in flowing fluid electric conductivity logs   总被引：1，自引：0，他引：1  

Christine Doughty  Chin-Fu Tsang 《Journal of Hydrology》2005,310(1-4):157-180

Flowing fluid electric conductivity logging provides a means to determine hydrologic properties of fractures, fracture zones, or other permeable layers intersecting a borehole in saturated rock. The method involves analyzing the time-evolution of fluid electric conductivity (FEC) logs obtained while the well is being pumped and yields information on the location, hydraulic transmissivity, and salinity of permeable layers. The original analysis method was restricted to the case in which flows from the permeable layers or fractures were directed into the borehole (inflow). Recently, the method was adapted to permit treatment of both inflow and outflow, including analysis of natural regional flow in the permeable layer. A numerical model simulates flow and transport in the wellbore during flowing FEC logging, and fracture properties are determined by optimizing the match between simulation results and observed FEC logs. This can be a laborious trial-and-error procedure, especially when both inflow and outflow points are present. Improved analyses methods are needed. One possible tactic would be to develop an automated inverse method, but this paper takes a more elementary approach and focuses on identifying the signatures that various inflow and outflow features create in flowing FEC logs. The physical insight obtained provides a basis for more efficient analysis of these logs, both for the present trial and error approach and for a potential future automated inverse approach. Inflow points produce distinctive signatures in the FEC logs themselves, enabling the determination of location, inflow rate, and ion concentration. Identifying outflow locations and flow rates typically requires a more complicated integral method, which is also presented in this paper.  相似文献   

Two contrasted P–T–time paths of coronitic metanorites of the French Massif Central: are reaction textures reliable guides to metamorphic histories?     

C. NICOLLET  P. GONCALVES 《Journal of Metamorphic Geology》2005,23(2):97-105

Metanorites from two eclogitized metagabbros of the Hercynian French Massif Central preserve coronitic textures of hornblende, garnet, quartz and/or kyanite produced at the expense of the primary magmatic assemblage orthopyroxene and plagioclase. Using a petrogenetic grid in the CFMASH system, two possible P–T evolutions for the origin of the coronas are evaluated. The sequence of reactions involving the formation of Hbl (–Ky) ± Grt and Qtz coronitic assemblages is consistent with an isobaric cooling at high pressure (c. 1–2 GPa) under hydrated conditions. However, this P–T path, inferred by using only petrographical observations, is inconsistent with the geochronological constraints: emplacement of the gabbro at 490 Ma and high‐pressure metamorphism at 410 Ma. In order to reconcile petrographical observations with geochronological constraints, we propose a discontinuous two‐stage evolution involving a change in water activity with time. (1) Emplacement and cooling of the norite at low pressure under anhydrous conditions, at 490 Ma. (2) During the Hercynian orogeny, the norite experienced an increase in pressure and temperature under fluid‐present conditions. Adding water to the system implies a dramatic change in the petrogenetic grid topology, restricting the orthopyroxene–plagioclase assemblage only to high temperatures. Therefore, the breakdown of the unstable magmatic assemblage, through apparent retrograde reactions, occurred along the prograde P–T path which never crossed the equilibrium boundaries of these reactions.  相似文献   

Reaction localization and softening of texturally hardened mylonites in a reactivated fault zone, central Argentina   总被引：6，自引：0，他引：6  

S. J. WHITMEYER  R. P. WINTSCH 《Journal of Metamorphic Geology》2005,23(6):411-424

The Tres Arboles ductile fault zone in the Eastern Sierras Pampeanas, central Argentina, experienced multiple ductile deformation and faulting events that involved a variety of textural and reaction hardening and softening processes. Much of the fault zone is characterized by a (D2) ultramylonite, composed of fine‐grained biotite + plagioclase, that lacks a well‐defined preferred orientation. The D2 fabric consists of a strong network of intergrown and interlocking grains that show little textural evidence for dislocation or dissolution creep. These ultramylonites contain gneissic rock fragments and porphyroclasts of plagioclase, sillimanite and garnet inherited from the gneissic and migmatitic protolith (D1) of the hangingwall. The assemblage of garnet + sillimanite + biotite suggests that D1‐related fabrics developed under upper amphibolite facies conditions, and the persistence of biotite + garnet + sillimanite + plagioclase suggests that the ultramylonite of D2 developed under middle amphibolite facies conditions. Greenschist facies, mylonitic shear bands (D3) locally overprint D2 ultramylonites. Fine‐grained folia of muscovite + chlorite ± biotite truncate earlier biotite + plagioclase textures, and coarser‐grained muscovite partially replaces relic sillimanite grains. Anorthite content of shear band (D3) plagioclase is c. An30, distinct from D1 and D2 plagioclase (c. An35). The anorthite content of D3 plagioclase is consistent with a pervasive grain boundary fluid that facilitated partial replacement of plagioclase by muscovite. Biotite is partially replaced by muscovite and/or chlorite, particularly in areas of inferred high strain. Quartz precipitated in porphyroclast pressure shadows and ribbons that help define the mylonitic fabric. All D3 reactions require the introduction of H⁺ and/or H₂O, indicating an open system, and typically result in a volume decrease. Syntectonic D3 muscovite + quartz + chlorite preferentially grew in an orientation favourable for strain localization, which produced a strong textural softening. Strain localization occurred only where reactions progressed with the infiltration of aqueous fluids, on a scale of hundreds of micrometre. Local fracturing and microseismicity may have induced reactivation of the fault zone and the initial introduction of fluids. However, the predominant greenschist facies deformation (D3) along discrete shear bands was primarily a consequence of the localization of replacement reactions in a partially open system.  相似文献   

佳木斯地块西缘金矿带构造效应与壳幔作用--以鹤岗隆起为例     

徐受民赵海滨  于荣文 《华东地质学院学报》2005,28(4):325-328

佳木斯地块西缘金矿带的形成受左行走滑断裂带和深部流体控制，壳-幔作用和地球动力体制转换是成矿物质活化→运移→聚集→成矿的基本动力学保障，构造应力场转换是其重要表现形式。深切地幔牡丹江岩石圈断裂的活动发生了深熔作用，使成矿物质得以活化、运移的重要驱动力，是成岩成矿作用发生的根本原因之一。地幔流体通过壳-幔相互作用形成了含矿流体，为流体成矿作用提供了矿源，并沿深断裂运移到更高的层位，在物理化学条件发生改变时沉积成矿。佳木斯地块西缘金矿带是受深断裂控制的，矿床之间是相互联系的，是在一个构造应力体制下完成它们的成矿作用的。北北东向和伴生的北西西向断裂，并有中生代浅成-超浅成岩体或脉岩侵位是今后找矿的方向。  相似文献   

A new numerical approach to the hyperstatic reaction method for segmental tunnel linings     

Ngoc Anh Do  Daniel Dias  Pierpaolo Oreste  Irini Djeran‐Maigre 《国际地质力学数值与分析法杂志》2014,38(15):1617-1632

This paper proposes a numerical approach to the hyperstatic reaction method (HRM) for the analysis of segmental tunnel linings. The influence of segmental joints has been considered directly using a fixity ratio that is determined on the basis of the rotational stiffness. The parameters necessary for the calculation are presented. A specific implementation has been developed using a FEM framework. This code is able to consider the three‐dimensional (3D) effect of segment joints in successive rings on the tunnel lining behaviour. The present HRM allows one to take an arbitrary distribution of segment joints along the tunnel boundary into consideration. In addition, the rotational stiffness of segment joints has been simulated using nonlinear behaviour, as it is closer to the true behaviour of a joint than linear or bilinear behaviour. The numerical results of three hypotheses on ring interaction, which allow the 3D effect of a segmental tunnel lining to be taken into account, have been compared with data obtained from the shield‐driven tunnel of the Bologna–Florence high‐speed railway line project. The numerical results presented in the paper show that the proposed HRM can be used to effectively estimate the behaviour of a segmental tunnel lining. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

基于分段副产物瞬时选择性的反应器网络综合     

胡仰栋  周勇  伍联营 《中国海洋大学学报(自然科学版)》2020,50(3):61-66

针对第三类反应体系的反应器网络综合问题,提出将串联反应以反应物到目的产物的反应步数为依据的新分段策略。通过比较不分段目的产物、不分段目的产物和中间产品、分段副产物和分段目的产物这四种不同的瞬时选择性,提出以分段副产物瞬时选择性为参数,以其对关键组分浓度或转化率的导数为依据选择各阶段最合适的反应器,以目的产物总选择性最大为目标采用遗传算法优化反应器网络。通过三个实例验证了本文所建立方法在解决复杂反应反应器网络综合问题的有效性,且本方法同样适用于简单反应体系。  相似文献   

Controls on metamorphic equilibration: the importance of intergranular solubilities mediated by fluid composition          下载免费PDF全文

W. D. Carlson  J. D. Hixon  J. M. Garber  R. J. Bodnar 《Journal of Metamorphic Geology》2015,33(2):123-146

A dramatic demonstration of the role of intergranular solubility in promoting chemical equilibration during metamorphism is found in the unusual zoning of garnet in pelitic schist exposed at Harpswell Neck, Maine, USA. Many garnet crystals have irregular, patchy distributions of Mn, Cr, Fe and Mg in their inclusion‐rich interiors, transitioning to smooth, concentric zoning in their inclusion‐poor outer rims; in contrast, zoning of Ca and Y is comparatively smooth and concentric throughout. We re‐assess the disputed origin of these zoning features by examining garnet growth in the context of the thermal and structural history of the rocks, and by evaluating the record of fluid–rock interaction revealed in outcrop‐scale veining and fluid‐inclusion assemblages. The transition in the character of garnet zoning correlates with the onset of a synkinematic, simple‐shear‐dominated phase of garnet growth and with a shift in the composition of the intergranular fluid from CO₂‐rich to H₂O‐rich. Compositional variations in garnet are therefore best explained by a two‐stage growth history in which intergranular diffusive fluxes reflect differences in the concentration of dissolved species in these two contrasting fluids. Interiors of garnet crystals grew in the presence of a CO₂‐rich fluid, in which limited solubility for Mn and Cr (and perhaps Fe and Mg) produced patchy disequilibrium overprint zoning, while appreciable solubility for Ca and Y permitted their rock‐wide equilibration. Rims grew in the presence of an H₂O‐rich fluid, in which high intergranular concentrations for all elements except Cr enabled diffusion over length scales sufficient for rock‐wide equilibration. This striking example of partial chemical equilibrium during reaction and porphyroblast growth implies that thermal effects may commonly be subsidiary in importance to solubilities in the intergranular medium as determinants of length scales for metamorphic equilibration.  相似文献   

Reaction softening by dissolution–precipitation creep in a retrograde greenschist facies ductile shear zone,New Hampshire,USA          下载免费PDF全文

R. J. McAleer  D. L. Bish  M. J. Kunk  K. R. Sicard  P. M. Valley  G. J. Walsh  B. A. Wathen  R. P. Wintsch 《Journal of Metamorphic Geology》2017,35(1):95-119

We describe strain localization by a mixed process of reaction and microstructural softening in a lower greenschist facies ductile fault zone that transposes and replaces middle to upper amphibolite facies fabrics and mineral assemblages in the host schist of the Littleton Formation near Claremont, New Hampshire. Here, Na‐poor muscovite and chlorite progressively replace first staurolite, then garnet, and finally biotite porphyroblasts as the core of the fault zone is approached. Across the transect, higher grade fabric‐forming Na‐rich muscovite is also progressively replaced by fabric‐forming Na‐poor muscovite. The mineralogy of the new phyllonitic fault‐rock produced is dominated by Na‐poor muscovite and chlorite together with late albite porphyroblasts. The replacement of the amphibolite facies porphyroblasts by muscovite and chlorite is pseudomorphic in some samples and shows that the chemical metastability of the porphyroblasts is sufficient to drive replacement. In contrast, element mapping shows that fabric‐forming Na‐rich muscovite is selectively replaced at high‐strain microstructural sites, indicating that strain energy played an important role in activating the dissolution of the compositionally metastable muscovite. The replacement of strong, high‐grade porphyroblasts by weaker Na‐poor muscovite and chlorite constitutes reaction softening. The crystallization of parallel and contiguous mica in the retrograde foliation at the expense of the earlier and locally crenulated Na‐rich muscovite‐defined foliation destroys not only the metastable high‐grade mineralogy, but also its stronger geometry. This process constitutes both reaction and microstructural softening. The deformation mechanism here was thus one of dissolution–precipitation creep, activated at considerably lower stresses than might be predicted in quartzofeldspathic rocks at the same lower greenschist facies conditions.  相似文献   

从平衡-封闭-静态转向非平衡-开放-动力学研究-热液矿床成因的若干新概念概述     

张荣华  胡书敏  张雪彤 《地质学报》2016,90(9):2437-2453

热液金属矿床成因研究过程中,观测与实验始终是密切结合的。上世纪70年代,平衡热力学的实验数据的快速积累,使人们用热力学理论计算可以预测和反演矿石和岩石的成因。但是,没有矿物-水溶液的反应速率数据,又没有与流体力学的结合,搞清楚矿石成因是困难的。七、八十年代,开始研究矿物与水溶液的反应动力学实验。科学家们开始瞄准了从平衡-封闭-静态转向非平衡-开放-动力学研究的这个大方向。1992年我们建立地球化学动力学开放研究实验室。研究高温高压矿物与水反应速率,发现固液的开放体系的自组织现象。实验发现温度影响矿物的各个元素反应速率改变,发现在跨越水临界态时矿物与水反应速率涨落、在近临界的气-液两相不混溶区一些金属进入气相、超临界流体的氧化作用及特别的溶剂性能影响矿物溶解性质。实验证实:临界态区流体与矿石成因有关。水岩相互作用的反应动力学实验温度从低温到550度,揭示矿石的金属来源、迁移、金属与蚀变分带机制。一大批大于300度的矿物与水反应动力学实验在国际界是少有报道的。九十年代,超高压的科学发展,与同步辐射光源的技术进步的结合,使固体地球科学又迈向了地球深内部。我们发展了高温高压流体性质的原位直测(测量850℃水溶液)红外谱,发现深部流体的新性质:气液两相流体的新结构,在临界温度区(300~400℃),水分子氢键网络的破坏受压力影响不大(23MPa~3GPa),同时,出现水的高电导率。研发新仪器为开放-流动-非平衡的反应动力学实验与极端条件下物质性质的直接观测结合,在科学前沿领域开辟了创新道路。  相似文献   

Reactivity of micas and cap-rock in wet supercritical CO2 with SO2 and O2 at CO2 storage conditions     

《Applied Geochemistry》2016

Seal or cap-rock integrity is a safety issue during geological carbon dioxide capture and storage (CCS). Industrial impurities such as SO₂, O₂, and NOx, may be present in CO₂ streams from coal combustion sources. SO₂ and O₂ have been shown recently to influence rock reactivity when dissolved in formation water. Buoyant water-saturated supercritical CO₂ fluid may also come into contact with the base of cap-rock after CO₂ injection. Supercritical fluid-rock reactions have the potential to result in corrosion of reactive minerals in rock, with impurity gases additionally present there is the potential for enhanced reactivity but also favourable mineral precipitation.The first observation of mineral dissolution and precipitation on phyllosilicates and CO₂ storage cap-rock (siliciclastic reservoir) core during water-saturated supercritical CO₂ reactions with industrial impurities SO₂ and O₂ at simulated reservoir conditions is presented. Phyllosilicates (biotite, phlogopite and muscovite) were reacted in contact with a water-saturated supercritical CO₂ containing SO₂, or SO₂ and O₂, and were also immersed in the gas-saturated bulk water. Secondary precipitated sulfate minerals were formed on mineral surfaces concentrated at sheet edges. SO₂ dissolution and oxidation resulted in solution pH decreasing to 0.74 through sulfuric acid formation. Phyllosilicate dissolution released elements to solution with ∼50% Fe mobilized. Geochemical modelling was in good agreement with experimental water chemistry. New minerals nontronite (smectite), hematite, jarosite and goethite were saturated in models. A cap-rock core siltstone sample from the Surat Basin, Australia, was also reacted in water-saturated supercritical CO₂ containing SO₂ or in pure supercritical CO₂. In the presence of SO₂, siderite and ankerite were corroded, and Fe-chlorite altered by the leaching of mainly Fe and Al. Corrosion of micas in the cap-rock was however not observed as the pH was buffered by carbonate dissolution. Ca-sulfate, and Fe-bearing precipitates were observed post SO₂-CO₂ reaction, mainly centered on surface cracks and an illite rich illite-smectite precipitate quantified. Water saturated impure supercritical CO₂ was observed to have reactivity to rock-forming biotite, muscovite and phlogopite mineral separates. In the cap-rock core however carbonates and chlorite were the main reacting minerals showing the importance of assessing actual whole core.  相似文献