大连沿海排污口及邻近水域细菌动态分析     

杨文新  樊景凤  周君  王中华  葛林科  丁德文  苏秀榕  李太武 《海洋与湖沼》2013,44(5):1249-1256

于2011年3月、5月、8月和10月对大连沿海10个排污口及部分排污口的邻近水域分别采集水样, 对样本进行细菌总数3M试纸计数、2216E培养基和TCBS培养基培养并菌落计数, 对不同菌株进行16S rRNA基因克隆测序, 鉴定种属, 对细菌时间、空间的动态分布与群落结构及细菌分布与生态因子的相关性进行了分析。结果表明, 不同的排污口之间细菌总数差别很大, 数量在(1.6—500.0)×104cfu/mL之间; 排污口与其邻近水域差异明显, 排污口、邻近5m、100m和500m距离的细菌总数全年平均分别为77.94×104、 34.00×104、 4.520×104和0.448×104 cfu/mL。不同季节之间, 远距离水样季节性差异较大, 而排污口间季节性差异相对较小。在群落构成上, 假交替单胞菌属、肠杆菌科、假单胞菌属、弧菌属和希瓦氏菌属为优势菌属, 检出率较高, 数量较大。细菌分布与多种生态因子具有不同程度的相关。  相似文献   

Impact of Ocean Mean Dynamic Topography on Satellite Data Assimilation     

F. BIROL  J. M. BRANKART  F. CASTRUCCIO  P. BRASSEUR  J. VERRON 《Marine Geodesy》2013,36(1-2):59-78

The response of an eddy-permitting ocean model to changes imposed by the use of different mean dynamic topographies (MDT) is analyzed in a multivariate assimilation context, allowing the evaluation of this impact, not only on the surface circulation, but also on the interior ocean representation. The assimilation scheme is a reduced-order sequential Kalman filter (SEEK). In a first set of experiments, high resolution sea surface temperature, along-track sea surface height and sea surface salinity from climatology are assimilated into a 1/3° resolution North and Tropical Atlantic version of the HYCOM model. In a second experiment, in situ profile data are assimilated in addition to the surface measurements.

The first set of experiments illustrates that important differences in the representation of the horizontal model circulation pattern are related to differences in the MDT used. The objective of assimilation is to improve the representation of the 3D ocean state. However, the imperfect representation of the mean dynamic topography appears to be an important limiting factor with regard to the degree of realism obtained in the simulated flow.

Vertical temperature and salinity profiles are key observations to drive a general circulation ocean model toward a more realistic state. The second set of experiments shows that assimilating them in addition to sea surface measurements is a far from trivial exercise. A specific difficulty is due to inconsistencies between the dynamic topography diagnosed from in situ observations and that diagnosed from sea surface height. These two fields obtained from different data sources do not contain exactly the same information. In order to overcome this difficulty, a strategy is proposed and validated.  相似文献   

Improving the Coastal Mean Dynamic Topography by Geodetic Combination of Tide Gauge and Satellite Altimetry     

Ole Baltazar Andersen  Karina Nielsen  Per Knudsen  Chris W. Hughes  Rory Bingham  Luciana Fenoglio-Marc 《Marine Geodesy》2013,36(6):517-545

Abstract

The ocean mean dynamic topography (MDT) is the surface representation of the ocean circulation. The MDT may be determined by the ocean approach, which involves temporal averaging of numerical ocean circulation model information, or by the geodetic approach, wherein the MDT is derived using the ellipsoidal height of the mean sea surface (MSS), or mean sea level (MSL) minus the geoid as the geoid. The ellipsoidal height of the MSS might be estimated either by satellite or coastal tide gauges by connecting the tide gauge datum to the Earth-centred reference frame. In this article we present a novel approach to improve the coastal MDT, where the solution is based on both satellite altimetry and tide gauge data using new set of 302 tide gauges with ellipsoidal heights through the SONEL network. The approach was evaluated for the Northeast Atlantic coast where a dense network of GNSS-surveyed tide gauges is available. The typical misfit between tide gauge and satellite or oceanographic MDT was found to be around 9?cm. This misfit was found to be mainly due to small scale geoid errors. Similarly, we found, that a single tide gauge places only weak constraints on the coastal dynamic topography.  相似文献   

测量船动态吃水测量方法研究     

吴炳昭  黄谟涛  陆秀平  黄贤源 《海洋测绘》2013,33(4):16-18

针对测量船特别是中大型测量船的动态吃水问题,提出了单船和双船载波相位差分GPS测定方法,给出了动态吃水计算公式。根据装备现状,对比分析了三种测量方法的适用范围,例举了典型参数值的动态吃水观测误差,旨在为测量作业人员提供借鉴和参考。  相似文献   

三种遥感反演海岸线方法的实验对比分析     

马立婷  陶秋香  张庆云 《海洋测绘》2013,(6):66-69

在分析海岸线提取算法基础上,以环渤海的Landsat7 ETM+影像为数据源,以基岩海岸线和淤泥质海岸线两种典型的海岸线为研究对象,采用Sobel边缘检测算法、阈值分割法和K最邻近分类算法进行海岸线提取实验。通过实验对比分析,归纳和总结了针对不同类型海岸线提取算法的适用性。  相似文献   

畸形波作用下四立柱张力腿平台动力响应研究     

谷家扬  吕海宁  杨建民 《海洋工程》2013,31(5):25-36

介绍了畸形波生成的方法并对各种线性合成畸形波的效率进行了对比。选用改进的随机波加瞬态波的方法模拟强非线性波———"新年波"的波形。采用微元法对张力腿平台的立柱和浮筒进行离散,编制程序对张力腿平台在强非线性波作用下的耦合动力响应进行了数值模拟,重点比较分析了张力腿平台在随机波及畸形波中所受波浪力、平台动力响应、系泊系统张力特性及浪向角对平台运动的影响。研究表明:在"新年波"作用下,0°浪向时,平台在x和z方向所受波浪力较随机波增长了约1/4,纵荡、垂荡及纵摇响应值分别增加了33%,38%和12%,张力腿张力幅值增加约20%,位于平台四角的张力腿张力有所差异,相邻两根张力腿的张力差别不大,浪向角对平台运动响应、张力腿张力的影响畸形波大于随机波的作用。为今后考虑强非线性波浪影响时张力腿平台的设计提供了借鉴和参考。  相似文献   

沙箱对桩腿耦合装置的影响研究     

刘丽红  刘锦昆  蒋习民  王德禹 《海洋工程》2013,31(5):18-24

桩腿耦合装置(简称LMU)在平台浮托安装过程中上部组块插尖与导管架桩管对接期间起缓冲作用,是海上浮装的最重要装置之一。运用非线性有限元软件ABAQUS,对相同尺寸、受相同垂向载荷作用的有沙箱和无沙箱的LMU分别进行了显式准静态和动态数值模拟,并将计算结果进行对比,以考察沙箱对LMU力学特性的影响。结果表明,与无沙箱的LMU相比,有沙箱的LMU能够承受较大的外载荷作用,可提升外套筒钢材的使用效率,较迅速地降低载荷转移作业过程中整个平台的运动速度,提高平台浮托安装过程中能量吸收速率,并且能减小LMU在动态过程中的最大应力。  相似文献   

Application of High Energy Dynamic Compaction in Coastal Reclamation Areas     

Shi-Jin Feng  Wei-Hou Shui  Li-Ya Gao  Li-Jun He 《Marine Georesources & Geotechnology》2013,31(2):130-142

High energy dynamic compaction (HEDC) is adopted in a coastal reclamation area because the grain size of backfilled soil mostly ranges between 20 cm and 100 cm. The in situ tests for evaluating the effectiveness of HEDC were performed on the backfilled soil ground. The crater depth per drop and the whole test zone elevations before and after HEDC were measured and analyzed. Dynamic penetration tests and spectral analysis of surface wave (SASW) tests were used for investigating the improvement depth. Furthermore, the allowable bearing capacity of HEDC treated ground was determined based on the results of plate-load tests. It was found that HEDC did not cause the ground surface heave during construction, and was more effective than low energy dynamic compaction (LEDC) in terms of applied energy utilization. Based on the test results, the improvement depth of HEDC at this site was not less than 14 m, and there was no obvious weak layer within the range of improvement depth. The allowable bearing capacities were larger than 160 kPa. The investigation results indicate that the HEDC technique is an effective way for improving backfilled coarse-grained soil in coastal reclamation areas. This technique helps to achieve both greater improvement depths and higher ground bearing capacities as compared with LEDC.  相似文献   

循环荷载下加固土体孔压的模糊正交试验分析     

闫春岭  唐益群  王元东  李仁杰 《吉林大学学报(地球科学版)》2011,41(3):805-811

针对地铁循环荷载下加固软粘土的孔隙水压力发展规律,对上海地铁4号线宝山-海伦引导段隧道周围的加固软黏土进行室内GDS循环三轴试验。结合重复正交设计法安排试验,借助模糊数学的理论与方法处理试验数据,充分考虑了振动频率（0.5、1.5、2.5 Hz）、动应力幅值（20、30、40 kPa）、固结比（1、1.4、2）以及超固结比（1、1.5、2）对土体孔隙水压力的影响。研究结果表明:振动频率、动应力幅值、固结比及超固结比对加固软黏土孔隙水压力的影响率分别为0.722、15.821、0.944及6.628;这说明影响加固软粘土孔隙水压力变化的主要因素是动应力幅值及超固结比,而固结比和振动频率的影响不显著。  相似文献   

吉林西部地区高砷地下水砷的阈值分析及风险评价   总被引：1，自引：0，他引：1  

赵娟  李育松  卞建民  张丽姝  杨占梅 《吉林大学学报(地球科学版)》2013,43(1):251-258

高砷地下水导致的砷中毒是吉林西部地区近年来新发现的地方病。为评价饮用水中砷对人体健康产生的潜在危害,在野外调查、采样分析的基础上,开展了水砷安全阈值分析 ,确定了砷的总质量浓度0.05 mg/L为研究区的水砷安全阈值,建立了地下水健康风险评价模型,进行了地下水砷健康风险评价。结果表明:研究区地下水砷引起的个人年均风险度最高达2.11×10^-3 a^-1,其中高砷的第四系承压水中97.06%的采样点水砷对人体的个人年均致癌风险度,大于国际辐射防护委员会(ICRP)推荐的最大可接受值5.0×10^-5 a^-1;作为备用水源的第三系大安组、泰康组承压水69.57%采样点砷的致癌风险度也超过最大可接受风险水平。通过对风险度评价结果与砷中毒病情等资料的对比分析,风险评价结果与砷中毒病情基本一致,验证了评价结果的合理性。  相似文献