Multi‐objective optimal design of FLC driven hybrid mass damper for seismically excited structures     

A. S. Ahlawat  A. Ramaswamy 《地震工程与结构动力学》2002,31(7):1459-1479

Structural vibration control using active or passive control strategy is a viable technology for enhancing structural functionality and safety against natural hazards such as strong earthquakes and high wind gusts. Both the active and passive control systems have their limitations. The passive control system has limited capability to control the structural response whereas the active control system depends on external power. The power requirement for active control of civil engineering structures is usually quite high. Thus, a hybrid control system is a viable solution to alleviate some of the limitations. In this paper a multi‐objective optimal design of a hybrid control system for seismically excited building structures has been proposed. A tuned mass damper (TMD) and an active mass driver (AMD) have been used as the passive and active control components of the hybrid control system, respectively. A fuzzy logic controller (FLC) has been used to drive the AMD as the FLC has inherent robustness and ability to handle the non‐linearities and uncertainties. The genetic algorithm has been used for the optimization of the control system. Peak acceleration and displacement responses non‐dimensionalized with respect to the uncontrolled peak acceleration and displacement responses, respectively, have been used as the two objectives of the multi‐objective optimization problem. The proposed design approach for an optimum hybrid mass damper (HMD) system, driven by FLC has been demonstrated with the help of a numerical example. It is shown that the optimum values of the design parameters of the hybrid control system can be determined without specifying the modes to be controlled. The proposed FLC driven HMD has been found to be very effective for vibration control of seismically excited buildings in comparison with the available results for the same example structure but with a different optimal absorber. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

全谱直读等离子发射光谱法直接测定天然矿泉水中的SO2-4   总被引：2，自引：0，他引：2  

查立新  刘洪青  马玲  戴先蓉 《安徽地质》2002,12(1):75-77

采用全谱直读等离子发射光谱(ICP-AES)直接测定天然矿泉水中SO2-4的方法在优化工作条件下SO42-的测定下限为0.09mgL-1,方法简便,快速,适用于批量生产.  相似文献   

冻融作用对地气系统能量交换的影响分析   总被引：7，自引：12，他引：7  

李述训  南卓铜  赵林 《冰川冻土》2002,24(5):506-511

通过对温度波在地层内传播过程问题的分析研究, 讨论土在冻结和融化过程对地气系统能量交换的影响, 并以亚粘土为例应用近似方法计算了在冻结和融化过程地气系统能量交换和地温变化特征, 同时将相同条件下发生冻融作用与不发生冻融作用情况地气系统热交换量进行了比较. 结果表明, 冻融作用使地气系统热交换加强, 同时吸热和放热的过程也发生了改变.  相似文献   

古—中生代之交的全球变化与生物效应   总被引：9，自引：0，他引：9  

彭元桥  殷鸿福 《地学前缘》2002,9(3):85-93

古—中生代之交是显生宙以来最大的一次生物绝灭期 ,其形成机制一直是地学界长期探讨的热点课题之一。地史重大转折期是地球内、外各圈层长期作用下 ,各种量变达到阀值 ,加之可能的外因激化 ,在短时间内以连锁反应形式相继质变 ,形成了全球变化 (包括生物绝灭 )的地球突变期。文中从可能的外因 (外星体撞击事件 )及内因 (岩石圈的变化 ,地球表层的变化和生物圈的变化 )两个方面探讨了古—中生代之交的全球变化与生物效应  相似文献   

25～75℃酸性NaCl溶液中方铅矿的溶解动力学   总被引：4，自引：0，他引：4  

张生  李建平  王玉荣  胡光黔 《地球化学》2002,31(6):587-592

在25～75℃、pH=0.43～2.45的1mol/LNaCl溶液中进行了方铅矿的溶解动力学实验。发现在远平衡条件下,方铅矿的溶解速率r与氢离子活度犤H+犦呈线性关系,溶解速率方程(速率定律)为:r=k犤H+犦,即对H+而言,溶解反应为一级。其中速率常数k为2.344×10-7mol/m2·s(25℃)、1.380×10-6mol/m2·s(50℃)、7.079×10-6mol/m2·s(75℃)。溶解反应的活化能为43.54kJ/mol,方铅矿的溶解机理为表面化学反应,速率决定步骤为表面配合物的离解。  相似文献   

湘中锑(金)矿床成矿物质来源——Ⅰ.微量元素及其实验地球化学证据   总被引：9，自引：0，他引：9  

马东升  潘家永  解庆林  何江 《矿床地质》2002,21(4):366-376

为了查明湘中盆地中-低温梯（金）矿床的成矿物质来源，文章应用高分辨率ICP-MS、ICP-AES等方法对岩石与矿石进行了系统测定，并结合作者以往分析数据和实验地球化学结果，对该区盆地及周边基底地层与矿床中的微量元素分布特征及其水/岩反应效应进行了综合分析和系统研究。结果表明：Sb、Au等成矿元素在元古界基底碎屑岩中具有高的背景含量，在近似成矿条件下的水/岩反应实验中，成矿元素的淋出率达20%～90%，元古界基底碎屑岩中的金（锑、钨）矿床的周围蚀变围岩中出现明显的金负异常区。而盆地内泥盆系统地层中的高锑含量仅局限于锑矿床（化）及其蚀变围岩中；湘中锑（金）矿床中的矿石与基底碎屑岩具有相似的稀土元素球粒陨石标准化配分曲线特征，以上微量元素地球化学特征充分证明该区锑（金）矿床锑、金等成矿物质主要来源于元古界底碎屑岩。  相似文献   

滇西北地区富碱岩体(脉)地质学及岩石化学特征   总被引：10，自引：0，他引：10  

葛良胜  邹依林  邢俊兵  李振华  郭晓东  张学军 《矿产与地质》2002,16(3):147-153

喜山期富碱岩体广布于滇西北地区 ,通过对其地质学和岩石化学特征的研究 ,认为富碱岩体 (脉 )由正长 (斑 )岩、二长斑岩、花岗斑岩及相关的火山岩组成 ,具有多次活动的特征 ,并形成区内富有特色的岩浆岩系列 ;该系列岩浆岩以富碱高钾为突出特点 ,具有正常的岩浆演化趋势 ,不同岩带岩石地质学和岩石化学方面有区域性变化规律。  相似文献   

机械研磨对平鲁煤系高岭石热行为的影响     

丁述理  彭苏萍  刘钦甫  许红亮 《煤田地质与勘探》2002,30(6):16-18

对煤系高岭石进行0-2h的研磨之后，再在900℃、1000℃、1400℃的温度条件下分别对其加热1h，然后利用X射线衍射（XRD）、差热分析（DTA）、红外光谱（IR）等手段，研究机械研磨对于煤系高岭石晶体结构的破坏作用以及对其热行为的影响。结果显示，煤系高岭石被研磨1h之后，高岭石的晶体结构几乎全部跨塌。把研磨1h的煤系高岭石加热到1000℃（加热1h），便能形成结晶良好的莫来石。  相似文献   

中国科学院固体地球科学知识创新工程现状与发展态势     

周少平  张金东  范蔚茗 《地球科学进展》2002,17(5):776-781

回顾了中国科学院国家知识创新试点工程实施以来特别是启动阶段3年里固体地球科学知识创新工程试点各项工作的进展情况，包括项目与经费、创新成果、人才吸引、科研竞争力提升、院地合作推进等方面，分析和总结了中国科学院固体地球科学知识创新工程现状，并展望了固体地球科学知识创新工程若干重要发展态势。  相似文献   

A multi-scale study on land use and land cover quality change: The case of the Yellow River Delta in China   总被引：5，自引：0，他引：5  

Xuegong Xu  Honghai Guo  Xiaoling Chen  Huiping Lin  Qiaoling Du 《GeoJournal》2002,56(3):177-183

This paper presents a case study of the Yellow River Delta in China, to trace land use and land cover changes during the past 20 years, with an emphasis on land quality changes. Three sets of data are used in this case study: remote sensing data derived from satellite images; crop yield data from statistics; and soil data collected by the researchers in the field. Our study reveals that at the regional scale, LUCC has taken place in a positive direction: vegetation cover has been expanding and crop yields per hectare have been on rise. However, while the overall eco-environment has improved, the improvement is uneven across the Delta region. At local levels, some areas show signs of increased salinization and declining organic content. Both natural forces and human activities are responsible for the LUCC, but human activities play a more important role. While some impacts of human activities are positive, the damages are often long-lasting and irreversible. We also conclude that it is necessary to use both macro data (such as remote sensing data) and micro data (data collected in the field) to study land quality change. The former are efficient in examining land quality changes at the regional scale, the latter can serve to verify ground patterns revealed from macro data and help to identify local variations, so as to get a comprehensive understanding of LUCC and promote sustainable land use and land management. This revised version was published online in July 2006 with corrections to the Cover Date.  相似文献