��ͬģ���º������ɶԸ߾���GPS������Ӱ��     

方川  高井祥  王坚  胡洪 《大地测量与地球动力学》2014,34(4):135-139

???й?????????IGS????,??????FES2004????????NAO99b?????????????????????????????????λ?????????????????????????????????λ????????cm??????????????U????????????????????????3~4????????????????????????????????mm????????????????????????С????????????????GPS????????????????10^-8??????????????????????????????????С??mm?????????????????????????????1 cm??  相似文献   

A virtual experiment technique on the elementary behaviour of granular materials with discrete element method     

Xia Li  Hai‐Sui Yu  Xiang‐Song Li 《国际地质力学数值与分析法杂志》2013,37(1):75-96

Multi‐scale investigations aided by the discrete element method (DEM) play a vital role for current state‐of‐the‐art research on the elementary behaviour of granular materials. Similar to laboratory tests, there are three important aspects to be considered carefully, which are the proper stress/strain definition and measurement, the application of target loading paths and the designed experiment setup, to be addressed in the present paper. Considering the volume sensitive characteristics of granular materials, in the proposed technique, the deformation of the tested specimen is controlled and measured by deformation gradient tensor involving both the undeformed configuration and the current configuration. Definitions of Biot strain and Cauchy stress are adopted. The expressions of them in terms of contact forces and particle displacements, respectively, are derived. The boundary of the tested specimen consists of rigid massless planar units. It is suggested that the representative element uses a convex polyhedral (polygonal) shape to minimize possible boundary arching effects. General loading paths are described by directly specifying the changes in the stress/strain invariants or directions. Loading can be applied in the strain‐controlled mode by specifying the translations and rotations of the boundary units, or in the stress‐controlled mode by using a servo‐control mechanism, or in the combination of the two methods to realize mixed boundary conditions. Taking the simulation results as the natural consequences originated from a complex system, virtual experiments provide particle‐scale information database to conduct multi‐scale investigations for better understanding in granular material behaviours and possible development of the constitutive theories provided the qualitative similarity between the simulation results from virtual experiments and observations on real material behaviour. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

A simplified analysis of interface failure under compressive normal stress and monotonic or cyclic shear loading     

Zenon Mrz  Marcin Bia&#x;as 《国际地质力学数值与分析法杂志》2005,29(4):337-368

Interface damage and delamination is usually accompanied by frictional slip at contacting interfaces under compressive normal stress. The present work is concerned with an analysis of progressive interface failure using the cohesive crack model with the critical stress softening and frictional traction present at the contact. Both monotonic and cyclic loadings are considered for anti‐plane shear of an elastic plate bonded to a rigid substrate by means of cohesive interface. An analytical solution can be obtained by neglecting the effect of minor shear stress component. The analysis of progressive delamination process revealed three solution types, namely: short, medium and long plate solutions. The long plate solution was obtained under an assumption of quasistatic progressive growth of the delamination zone. In view of snap back response, the quasistatic deformation process cannot be executed by either traction or displacement control. The states of frictional slip accompanied by shake down or incremental failure are distinguished in the case of cyclic loading, related to load amplitude and structural dimensions. The analysis provides a reference solution for numerical treatment of more complex cases. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

沟谷地形对高填方拱涵涵周土压力影响研究     

冯忠居  王思琦  王溪清  王泽国  潘放  成圆梦  李军 《岩土力学》2023,44(1):119-130

沟谷地形下高填方涵洞土压力分布规律较为复杂,不同沟谷地形下涵周土压力分布规律与上埋式涵洞差异显著。为探明沟谷地形对高填方拱涵涵周土压力的影响,采用离心模型试验与数值模拟方法,建立了地形-涵洞-填土的相互作用模型,分析了不同沟谷宽度B、沟谷坡度α下的拱涵涵周土压力及涵顶土压集中系数Ks的分布规律,并与最新涵洞设计规范进行了对比,阐述了沟谷地形下高填方拱涵土压力形成机制。研究表明：（1）沟谷宽度B对涵顶土压力集中系数Ks影响显著,沟谷宽度B为4D～6D,D为拱涵的净跨径,涵顶土压力集中系数Ks增幅较大;（2）沟谷宽度B小于4D时,可发挥沟谷地形对涵洞的减载作用;（3）沟谷坡度α在45°～60°时,涵顶土压力及其Ks变化最显著;（4）填土高度为20m,α>70°时,Ks≤1。填土高度为40m,α>50°时,Ks≤1;(5)我国最新涵洞设计规范推荐的Ks与离心模型试验、数值模拟规律存在一定差异,当α=45°时,沟谷宽度B较小时,规范的涵顶土压力集中系数Ks较为保守;（6）沟谷地形下高填方拱涵Ks与拱顶压密区、等压面的形成有关。拱顶压密区可引起拱涵涵顶土压力集中,并引起压密区周边土体...  相似文献   

Experimental study on the dynamic modulus of compacted loess under bidirectional dynamic load     

Liguo Yang  Shengjun Shao  Qilong Sun  Ping Wang 《地震研究进展（英文）》2022,2(3):100115

The dynamic characteristics of compacted loess are of great significance to the seismic construction of the Loess Plateau area in Northwest China, where earthquakes frequently occur. To study the change in the dynamic modulus of the foundation soil under the combined action of vertical and horizontal earthquakes, a hollow cylindrical torsion shear instrument capable of vibrating in four directions was used to perform two-way coupling of compression and torsion of Xi'an compacted loess under different dry density and deviator stress ratios. The results show that increasing the dry density can improve the initial dynamic compression modulus and initial dynamic shear modulus of compacted loess. With an increase in the deviator stress ratio, the initial dynamic compression modulus increases, to a certain extent, but the initial dynamic shear modulus decreases slightly. The dynamic modulus gradually decreases with the development of dynamic strain and tends to be stable, and the dynamic modulus that reaches the same strain increases with an increasing dry density. At the initial stage of dynamic loading, the attenuation of the dynamic shear modulus with the strain development is faster than that of the dynamic compression modulus. Compared with previous research results, it is determined that the dynamic modulus of loess under bidirectional dynamic loading is lower and the attenuation rate is faster than that under single-direction dynamic loading. The deviator stress ratio has a more obvious effect on the dynamic compression modulus. The increase in the deviator stress ratio can increase the dynamic compression modulus, to a certain extent. However, the deviator stress ratio has almost no effect on the dynamic shear modulus, and can therefore be ignored.  相似文献   

真三轴单面临空下煤岩组合体冲击破坏特征试验研究     

杨科  刘文杰  马衍坤  许日杰  池小楼 《岩土力学》2022,(1):15-27

煤岩复合承载结构所处的应力边界条件不同,冲击地压在巷道中的显现特征和前兆规律亦不相同。采用高频振动采集及孔内成像三轴动静载试验系统,开展了高静载和动静载耦合作用下煤岩组合体真三轴单面临空试验,分析了煤岩组合体界面处力学特征和强度条件,探究了不同应力边界下煤岩组合体的破坏形态、动力显现特征和声发射信号的演变规律。研究结果表明:(1)受煤岩变形相互制约的影响,交界面处砂岩强度被"弱化"。当界面处煤体裂隙尖端的应力大于"弱化"后砂岩强度时,裂隙将穿过煤岩界面发育至砂岩中,砂岩呈现出屈曲层裂、劈裂成板的破坏形态。(2)高静载作用下,煤岩组合体变形破坏特征和声发射信号具有明显的前兆规律,组合体发生承载失效前煤体局部颗粒弹射动能增大、弹射颗粒块度降低,声发射信号由"高频低能"向"高频高能"转变,组合体的破坏形态以剪切-张拉复合破坏为主。(3)受冲击动载影响,顶底板砂岩夹持作用减弱,煤体裂纹尖端应力得不到有效积聚,裂纹扩展到煤岩交界面时被阻隔,组合体以煤样的张拉破坏为主,声发射信号呈现出"高频高能"的特点,但大多集中在冲击破坏之后,导致组合体动力破坏难以预测。(4)与纯静载作用相比,虽然动静载耦合作...  相似文献   

陕西延安Q_2原状黄土抗拉强度试验研究     

孙纬宇  梁庆国  严松宏  欧尔峰  邵森林 《地质力学学报》2015,21(3):386-392

对陕西延安新宝塔山隧道Q2原状黄土进行了不同加载速率的无侧限抗压与贯入抗拉试验,研究了Q2原状黄土抗压与抗拉强度的影响因素。结果表明:加载速率对宝塔山Q2原状黄土抗压和抗拉强度影响较大,抗压强度与抗拉强度随加载速率增大而增大;高径比对抗拉强度也有较大影响,试验时当高径比控制在1.0左右时,高径比对宝塔山Q2原状黄土的抗拉强度影响相对较小,因此采用轴向压裂法测量黄土的抗拉强度时,高径比宜控制在1.0;在试验加载速率范围内,加载速率对宝塔山Q2原状黄土的压拉比影响不大,其压拉比在9.88~13.68范围内变化。  相似文献   

用CSR4.0+CS模型计算海潮负荷改正   总被引：1，自引：1，他引：0  

王文利  董鸿闻 《大地测量与地球动力学》2003,23(4):70-74

介绍了CSR3．0与CSR4．0 CS海潮模型，并对两模型进行了分析和实算比较，认为CSR4．0 CS比CSR3．0海潮模型精度更高，在计算中国测站海潮改正时，顾及中国近海海潮图是必要的。对我国第二期水准路线用CSR4．0 CS模型计算了海潮负荷改正，结果表明：海潮负荷对高精度水准测量的影响，主要取决于水准路线的近海位置，越是近海地区越明显；在近海区域，这项改正不能忽略。  相似文献   

Undrained dynamic-loading ring-shear apparatus and its application to landslide dynamics   总被引：26，自引：17，他引：9  

Kyoji Sassa  Hiroshi Fukuoka  Gonghui Wang  Naohide Ishikawa 《Landslides》2004,1(1):7-19

Landslides are gravitational mass movements of rock, debris or earth. Some move very slowly, thus conforming to the field of statics, but some move rapidly. Study of the initiation and motion of rapid landslides needs to develop Landslide Dynamics involving dynamic loading and dynamic generation/dissipation of excess pore-water pressure. New developments in science can be facilitated by new technological advances. This study aimed to develop a new apparatus that can geotechnically simulate the formation of the shear zone and the following long and rapid shear displacement that occurs in high-velocity landslides. Professor K. Sassa and his colleagues at DPRI (Disaster Prevention Research Institute), Kyoto University, have worked to develop an undrained dynamic-loading ring-shear apparatus for this purpose. A series of different types of apparatus (DPRI-3, 4, 5, 6, 7) have been developed from 1992 to the present. This paper describes the development of this apparatus and its application to the study of earthquake-induced landslides and the latest landslide-triggered debris flow in Japan. Also, tests of the latest version (DPRI-7) with a transparent shear box for direct observation of the shear zone during a rapid shearing are described.  相似文献   

Observations and modelling of the travel time delay and leading negative phase of the 16 September 2015 Illapel,Chile tsunami     

Peitao Wang  Zhiyuan Ren  Lining Sun  Jingming Hou  Zongchen Wang  Ye Yuan  Fujiang Yu 《海洋学报(英文版)》2021,40(11):11-30

The systematic discrepancies in both tsunami arrival time and leading negative phase (LNP) were identified for the recent transoceanic tsunami on 16 September 2015 in Illapel, Chile by examining the wave characteristics from the tsunami records at 21 Deep-ocean Assessment and Reporting of Tsunami (DART) sites and 29 coastal tide gauge stations. The results revealed systematic travel time delay of as much as 22 min (approximately 1.7％ of the total travel time) relative to the simulated long waves from the 2015 Chilean tsunami. The delay discrepancy was found to increase with travel time. It was difficult to identify the LNP from the near-shore observation system due to the strong background noise, but the initial negative phase feature became more obvious as the tsunami propagated away from the source area in the deep ocean. We determined that the LNP for the Chilean tsunami had an average duration of 33 min, which was close to the dominant period of the tsunami source. Most of the amplitude ratios to the first elevation phase were approximately 40％, with the largest equivalent to the first positive phase amplitude. We performed numerical analyses by applying the corrected long wave model, which accounted for the effects of seawater density stratification due to compressibility, self-attraction and loading (SAL) of the earth, and wave dispersion compared with observed tsunami waveforms. We attempted to accurately calculate the arrival time and LNP, and to understand how much of a role the physical mechanism played in the discrepancies for the moderate transoceanic tsunami event. The mainly focus of the study is to quantitatively evaluate the contribution of each secondary physical effect to the systematic discrepancies using the corrected shallow water model. Taking all of these effects into consideration, our results demonstrated good agreement between the observed and simulated waveforms. We can conclude that the corrected shallow water model can reduce the tsunami propagation speed and reproduce the LNP, which is observed for tsunamis that have propagated over long distances frequently. The travel time delay between the observed and corrected simulated waveforms is reduced to <8 min and the amplitude discrepancy between them was also markedly diminished. The incorporated effects amounted to approximately 78％ of the travel time delay correction, with seawater density stratification, SAL, and Boussinesq dispersion contributing approximately 39％, 21％, and 18％, respectively. The simulated results showed that the elastic loading and Boussinesq dispersion not only affected travel time but also changed the simulated waveforms for this event. In contrast, the seawater stratification only reduced the tsunami speed, whereas the earth's elasticity loading was responsible for LNP due to the depression of the seafloor surrounding additional tsunami loading at far-field stations. This study revealed that the traditional shallow water model has inherent defects in estimating tsunami arrival, and the leading negative phase of a tsunami is a typical recognizable feature of a moderately strong transoceanic tsunami. These results also support previous theory and can help to explain the observed discrepancies.  相似文献