吉林省地质灾害类型及防治对策探讨     

腾继奎 《吉林地质》1997,16(2):62-64

本文针对吉林省的地质灾害类型及各类地质灾害的成因，分布及其危害进行了论述。对其防治对策进行了探讨，提出了切合本省实际的五项防治措施。  相似文献   

Space-time mapping of soil salinity using probabilistic bayesian maximum entropy     

A. Douaik  M. van Meirvenne  T. Tóth  M. Serre 《Stochastic Environmental Research and Risk Assessment (SERRA)》2004,18(4):219-227

The mapping of saline soils is the first task before any reclamation effort. Reclamation is based on the knowledge of soil salinity in space and how it evolves with time. Soil salinity is traditionally determined by soil sampling and laboratory analysis. Recently, it became possible to complement these hard data with soft secondary data made available using field sensors like electrode probes. In this study, we had two data sets. The first includes measurements of field salinity (EC_a) at 413 locations and 19 time instants. The second, which is a subset of the first (13 to 20 locations), contains, in addition to EC_a, salinity determined in the laboratory (EC_2.5). Based on a procedure of cross-validation, we compared the prediction performance in the space-time domain of 3 methods: kriging using either only hard data (HK) or hard and mid interval soft data (HMIK), and Bayesian maximum entropy (BME) using probabilistic soft data. We found that BME was less biased, more accurate and giving estimates, which were better correlated with the observed values than the two kriging techniques. In addition, BME allowed one to delineate with better detail saline from non-saline areas.  相似文献   

Public participation in monitoring programmes as a tool for lakeshore monitoring: the example of Lake Pyhäjärvi, Karelia, Eastern Finland     

Ritta Niinioja  Anna-Liisa Holopainen  Liisa Lepist  Anita Rm  Jouko Turkka 《Limnologica》2004,34(1-2):154

Lake Pyhäjärvi, on the border between Finland and Russia in Karelia, is a very valuable clear-water lake of the Lobelia type. It belongs to the European Union's Natura 2000 programme in Finland, and has been included in regional and national monitoring programmes since the 1960s. The main monitoring station is situated near the outlet of the lake. Deterioration of its water quality was suspected already in the 1980s because of decreasing Secchi depths (transparency) and increasing chlorophyll a.The occurrence of algal blooms on the lakeshores is monitored weekly during each summer at one site on Lake Pyhäjärvi (site 1). This is a part of nationwide intensive algae monitoring programme organised by the environmental authorities together with voluntary observers at some 270 lake sites in Finland since 1998. Since 1997, Secchi depth observations have been carried out by volunteers biweekly or monthly at 17 sites on the lake. In the vicinity of one of these transparency observation sites (station 100), intensive monitoring of algae has been carried out. At this lakeshore monitoring site 69 algal observations were made, ten of which recorded algal blooms during the study period 1998–2002. The observed algal blooms were caused by algae of the Anabaena species, mainly by Anabaena lemmermannii. At Lake Pyhäjärvi the number of algal bloom observations received from the public have decreased from the 1990s to the 2000s. The range of Secchi disc transparency was 5.0–8.4 m with a mean value of 6.2 m at station 100 and 4.3–7.7 m (mean 6.1 m) at the main monitoring station 2 during the open water periods in 1998–2002. During this study period, the maximum values at site 100 seem to have increased slightly, which might indicate some improvement in the water quality due to decreased point source loading.We conclude that the intensive algal monitoring results of 5 years at the lakeshore site and the transparency results — both compiled by trained volunteers — reflect an improvement in the state of Lake Pyhäjärvi in Karelia. This conclusion is in accordance with the long-term water quality and short-core studies of sedimentary diatoms in Lake Pyhäjärvi. We suggest that the intensive algal observations and transparency measurements are both suitable methods for the monitoring of lakeshores and lakes, and that both are suitable for voluntary monitoring. We found public participation a good tool for monitoring lakes and lakeshores.  相似文献   

大地形变监测预报在中国西部防震减灾事业中的基础作用   总被引：2，自引：0，他引：2       下载免费PDF全文

丁平  王双绪 《地震工程学报》2005,27(4):333-336

本文以巩固和发挥大地形变地震监测预报基础地位和作用、积极推进中国西部防震减灾事业可持续性和协调性发展为主旨,回顾了西部地区20世纪70年代初至“九五”前期大地形变监测与地震预测研究工作基础,介绍了“九五”后期至今大地形变监测与地震预测研究的主要进展,并对该领域发展中所面临的一些问题进行了初步探讨。  相似文献   

Image processing of 2D resistivity data for imaging faults   总被引：6，自引：0，他引：6  

F. Nguyen  S. Garambois  D. Jongmans  E. Pirard  M.H. Loke   《Journal of Applied Geophysics》2005,57(4):260-277

A methodology to locate automatically limits or boundaries between different geological bodies in 2D electrical tomography is proposed, using a crest line extraction process in gradient images. This method is applied on several synthetic models and on field data set acquired on three experimental sites during the European project PALEOSIS where trenches were dug. The results presented in this work are valid for electrical tomographies data collected with a Wenner-alpha array and computed with an l₁ norm (blocky inversion) as optimization method. For the synthetic cases, three geometric contexts are modelled: a vertical and a dipping fault juxtaposing two different geological formations and a step-like structure. A superficial layer can cover each geological structure. In these three situations, the method locates the synthetic faults and layer boundaries, and determines fault displacement but with several limitations. The estimated fault positions correlate exactly with the synthetic ones if a conductive (or no superficial) layer overlies the studied structure. When a resistive layer with a thickness of 6 m covers the model, faults are positioned with a maximum error of 1 m. Moreover, when a resistive and/or a thick top layer is present, the resolution significantly decreases for the fault displacement estimation (error up to 150%). The tests with the synthetic models for surveys using the Wenner-alpha array indicate that the proposed methodology is best suited to vertical and horizontal contacts. Application of the methodology to real data sets shows that a lateral resistivity contrast of 1:5–1:10 leads to exact faults location. A fault contact with a resistivity contrast of 1:0.75 and overlaid by a resistive layer with a thickness of 1 m gives an error location ranging from 1 to 3 m. Moreover, no result is obtained for a contact with very low contrasts (1:0.85) overlaid by a resistive soil. The method shows poor results when vertical gradients are greater than horizontal ones. This kind of image processing technique should be systematically used for improving the objectiveness of tomography interpretation when looking for limits between geological objects.  相似文献   

Continuous Multi‐probe Measurements in Fastflowing Waters Using a Hydrographic Slot     

Bernhard Karrasch  Michael Herzog 《洁净——土壤、空气、水》2005,33(2):165-169

Taking continuous spatiotemporal in situ measurements with multi‐probes in fast‐flowing waters/rivers can be problematic because the sensors may be damaged by high shear forces and flotsam. To protect the multi‐probe and to enable easy access for the maintenance and calibration of the sensors, a special multi‐probe holder fixed in a hydrographic slot was developed. The validation of the probe system revealed a “memory effect” at short time scales (< 10 s) within sharp gradients caused by the overflow container of the multi‐probe rack keeping the sensors submerged in the sample water. Continuously recorded data (conductivity, temperature, pH, oxygen concentration and saturation, as well as in vivo fluorescence of chlorophyll‐a) from a research cruise on board the RV ALBIS along the river Elbe (river km 309) and entering the river Saale are presented. This river stretch upstream of the city of Magdeburg to the mouth of the Saale tributary was found to have a complex physicochemical character, which is attributable to the long mixing process of water from the river Saale and the river Elbe.  相似文献   

A statistical procedure for the analysis of seismotectonically induced hydrochemical signals: A case study from the Eastern Carpathians, Romania   总被引：3，自引：0，他引：3  

Jens Hartmann  Zsolt Berner  Doris Stüben  Norbert Henze   《Tectonophysics》2005,405(1-4):77-98

Changes in the stress field of an aquifer system induced by seismotectonic activity may change the mixing ratio of groundwaters with different compositions in a well, leading to hydrochemical signals which in principle could be related to discrete earthquake events. Due to the complexity of the interactions and the multitude of involved factors the identification of such relationships is a difficult task. In this study we present an empiric statistical approach suitable to analyse if there is an interdependency between changes in the chemical composition of monitoring wells and the regional seismotectonic activity of a considered area. To allow a rigorous comparison with hydrochemistry the regional earthquake time series was aggregated into an univariate time series. This was realized by expressing each earthquake in form of a parameter “e”, taking into consideration both energetic (magnitude of a seismic event) and spatial parameters (position of epi/hypocentrum relative to the monitoring site). The earthquake and the hydrochemical time-series were synchronised aggregating the e-parameters into “earthquake activity” functions E, which takes into account the time of sampling relative to the earthquakes which occurred in the considered area. For the definition of the aggregation functions a variety of different “e” parameters were considered. The set of earthquake functions E was grouped by means of factor analysis to select a limited number of significant and representative earthquake functions E to be used further on in the relation analysis with the multivariate hydrochemical data set. From the hydrochemical data a restricted number of hydrochemical factors were extracted. Factor scores allow to represent and analyse the variation of the hydrochemical factors as a function of time. Finally, regression analysis was used to detect those hydrochemical factors which significantly correlate with the aggregated earthquake functions.This methodological approach was tested with a hydrochemical data set collected from a deep well monitored for two years in the seismically active Vrancea region, Romania. Three of the hydrochemical factors were found to correlate significantly with the considered earthquake activities. A screening with different time combinations revealed that correlations are strongest when the cumulative seismicity over several weeks was considered. The case study also showed that the character of the interdependency depends sometimes on the geometrical distribution of the earthquake foci. By using aggregated earthquake information it was possible to detect interrelationships which couldn't have been identified by analysing only relations between single geochemical signals and single earthquake events. Further on, the approach allows to determine the influence of different seismotectonic patterns on the hydrochemical composition of the sampled well. The method is suitable to be used as a decision instrument in assessing if a monitoring site is suitable or not to be included in a monitoring net within a complex earthquake prediction strategy.  相似文献   

Experimental evidences and numerical modelling of debris flow initiated by channel runoff   总被引：1，自引：1，他引：1  

M. Berti  A. Simoni 《Landslides》2005,2(3):171-182

Debris flow initiation by channel bed mobilization is a common process in high mountainous areas. Initiation is more likely to occur at the outlet of small, steeply sloping basins where concentrated overland flow feeds an ephemeral channel incised in slope deposits. Such geological conditions are typical of the Dolomite region (Italian Alps), which is characterized by widespread debris flow activity triggered by severe summer thunderstorms. Real-time data and field observations for one of these catchments (Acquabona catchment, Belluno, Italian Alps) were used to characterize the hydrological response of the initiation area to rainfalls of varying intensity and duration. The observed behaviour was then reproduced by means of a simple hydrological model, based on the kinematic wave assumption, to simulate the generation of channel runoff. The model is capable of predicting the observed hydrological response for a wide range of rainfall impulses, thus providing a physical basis for the understanding of the debris flow triggering threshold.  相似文献   

Update and spatial extension of strategic forest inventories using time series remote sensing and modeling     

《International Journal of Applied Earth Observation and Geoinformation》2020

Up-to-date forest inventory information relating the characteristics of managed and natural forests is fundamental to sustainable forest management and required to inform conservation of biodiversity and assess climate change impacts and mitigation opportunities. Strategic forest inventories are difficult to compile over large areas and are often quickly outdated or spatially incomplete as a function of their long production cycle. As a consequence, automated approaches supported by remotely sensed data are increasingly sought to provide exhaustive spatial coverage for a set of core attributes in a timely fashion. The objective of this study was to demonstrate the integration of current remotely-sensed data products and pre-existing jurisdictional inventory data to map four forest attributes of interest (stand age, dominant species, site index, and stem density) for a 55 Mha study region in British Columbia, Canada. First, via image segmentation, spectrally homogenous objects were derived from Landsat surface-reflectance pixel composites. Second, a suite of Landsat-based predictors (e.g., spectral indices, disturbance history, and forest structure) and ancillary variables (e.g., geographic, topographic, and climatic) were derived for these units and used to develop predictive models of target attributes. For the often difficult classification of dominant species, two modelling approaches were compared: (a) a global Random Forests model calibrated with training samples collected over the entire study area, and (b) an ensemble of local models, each calibrated with spatially constrained local samples. Accuracy assessment based upon independent validation samples revealed that the ensemble of local models was more accurate and efficient for species classification, achieving an overall accuracy of 72% for the species which dominate 80% of the forested areas in the province. Results indicated that site index had the highest agreement between predicted and reference (R² = 0.74, %RMSE = 23.1%), followed by stand age (R² = 0.62, %RMSE = 35.6%), and stem density (R² = 0.33, %RMSE = 65.2%). Inventory attributes mapped at the image-derived unit level captured much finer details than traditional polygon-based inventory, yet can be readily reassembled into these larger units for strategic forest planning purposes. Based upon this work, we conclude that in a multi-source forest monitoring program, spatially localized and detailed characterizations enabled by time series of Landsat observations in conjunction with ancillary data can be used to support strategic inventory activities over large areas.  相似文献   

Towards more systematic perceptual model development: a case study using 3 Luxembourgish catchments          下载免费PDF全文

Sebastian Wrede  Fabrizio Fenicia  Núria Martínez‐Carreras  Jérôme Juilleret  Christophe Hissler  Andreas Krein  Hubert H. G. Savenije  Stefan Uhlenbrook  Dmitri Kavetski  Laurent Pfister 《水文研究》2015,29(12):2731-2750

The synthesis of experimental understanding of catchment behaviour and its translation into qualitative perceptual models is an important objective of hydrological sciences. We explore this challenge by examining the cumulative understanding of the hydrology of three experimental catchments and how it evolves through the application of different investigation techniques. The case study considers the Huewelerbach, Weierbach and Wollefsbach headwater catchments of the Attert basin in Luxembourg. Subsurface investigations including bore holes and pits, analysis of soil samples and Electrical Resistivity Tomography measurements are presented and discussed. Streamflow and tracer data are used to gain further insights into the streamflow dynamics of the catchments, using end‐member mixing analysis and hydrograph separation based on dissolved silica and electrical conductivity. We show that the streamflow generating processes in all three catchments are controlled primarily by the subsolum and underlying bedrock. In the Huewelerbach, the permeable sandstone formation supports a stable groundwater component with little seasonality, which reaches the stream through a series of sources at the contact zone with the impermeable marls formation. In the Weierbach, the schist formation is relatively impermeable and supports a ‘fill and spill’‐type of flow mechanism; during wet conditions, it produces a delayed response dominated by pre‐event water. In the Wollefsbach, the impermeable marls formation is responsible for a saturation‐excess runoff generating process, producing a fast and highly seasonal response dominated by event water. The distinct streamflow generating processes of the three catchments are represented qualitatively using perceptual models. The perceptual models are in turn translated into quantitative conceptual models, which simulate the hydrological processes using networks of connected reservoirs and transfer functions. More generally, the paper illustrates the evolution of perceptual models based on experimental fieldwork data, the translation of perceptual models into conceptual models and the value of different types of data for processes understanding and model representation. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献