从同震和震后形变分析1668年M8.5级郯城地震对周边地震活动性的影响     

徐昊  孙玉军  吴中海 《地质力学学报》2016,22(3):568-576

以山东郯城1668年大地震为例,以前人地表地质调查结果为约束,利用弹性位错理论初步获取了该地震的同震破裂模型;在此基础上,基于粘弹性分层模型分析了该地震的同震和震后形变,同时以主震断层为接收断层计算了库仑应力分布,进一步讨论了地幔不同粘滞性系数对地表形变和库仑应力变化的影响。计算结果显示,该地震是一个右旋走滑为主兼有一定逆冲性质的地震,其同震位移巨大,能量释放较彻底;同震破裂造成震中郯城县西北、东北和南部部分断层库仑应力增加,而震后形变使得这些断层库仑应力进一步增加,在单县、宿迁和日照等地,地震后350 a库仑应力变化量达到+1bar-+1MPa量级;地幔粘滞性系数不同,形变量和库仑应力变化达到稳定的时间不同,但最终趋于稳定的数值基本一致。  相似文献   

Axial friction response of full-scale pipes in soft clays     

《Applied Ocean Research》2016

The axial friction response of subsea pipelines in soft clays is a very important aspect for designers of subsea pipelines but the response is not well understood so far. There is a pressing need for the comprehension of the response. In this paper, model tests are performed using full-scale pipes coated with polyethylene (PE) to study the effects of the set-up period, the pipe diameter, the buried depth of the pipe, the shear strength of soft clays and the loading rate on the axial friction response of pipelines in soft clays. The variations of the axial friction coefficient are analyzed using the effective stress method based on model test results. The results show that the axial friction resistance increases with the increasing pipe diameter but the effect of the pipe diameter on the axial friction coefficient can be neglected. The ultimate axial resistance also increases with the increase of the buried depth of pipelines, the undrained shear strength of soft clays and the loading rate. The axial friction coefficient increases with the increasing loading rate. However, the axial friction coefficient decreases with the increasing buried depth. The method to determine the axial friction coefficient is developed by analyzing model test results, which considers the effects of the diameter, the buried depth, the undrained shear strength of soft clays and the loading rate. The study results not only extend the industry data base but also supply a basis to determine the axial friction coefficient of PE-coated pipes in soft clays for ocean engineering geological investigations.  相似文献   

Failure Pressure Analysis of Corroded Moderate-to-High Strength Pipelines     

苏晨亮  李昕  周晶 《海洋工程》2016,(1):69-82

Based on the elastic-plastic, large-deformation finite element method, burst capacity of steel pipeline with longitudinal corrosion defect subjected to internal pressure is studied. The appropriate stress-based criterion is used to predict the failure pressure of finite element model of corroded pipeline under internal pressure. By considering the pipe steel grades and geometries of corrosion defects, a series of finite element analyses is conducted. The effects of corrosion depth, length and width on burst capacity are also discussed. A specific failure pressure solution for the assessment of corrosion defects in moderate-to-high strength pipeline is proposed on the base of numerical results. The failure pressures predicted by the proposed method are in better agreement with the experimental results than the results by the other methods.  相似文献   

西秦岭阳山金矿带控矿因素、找矿标志及深部成矿预测     

李宏伟 《矿床地质》2018,37(1):67-80

目前对西秦岭阳山金矿带勘查评价正在加速进行,为了进一步查明该矿带成矿规律和找矿潜力,指导矿田深部勘查找矿工作,武警黄金第十二支队在矿区开展了深部矿产调查和研究。文章在前人研究的基础上,通过最新的地质、地球物理勘查和室内综合研究,分析和总结了阳山金矿带主要控矿因素和找矿标志以及各因素的控矿机制。研究显示:区内的北东东向、近东西向断裂系统多沿葛条湾-草坪梁复背斜南翼层间褶皱岩层薄弱面或不同岩性接触面发育,在成矿过程中起到通道作用,限定了矿体的展布,为主要控矿因素。在明确找矿标志的基础上,以安坝矿段为研究对象,采用三维地质建模找矿信息量法进行了定量成矿预测,共圈定出深部找矿靶区4处,为矿区下一步的勘查指明了方向。  相似文献   

全球N-MORB和E-MORB分类方案对比   总被引：3，自引：2，他引：1  

第鹏飞  陈万峰  张旗  王金荣  汤庆艳  焦守涛 《岩石学报》2018,34(2):264-274

N-MORB与E-MORB是大洋中脊玄武岩常用的分类,二者地球动力学意义不同,备受学术界关注。对于N-MORB与E-MORB的分类识别标志,不同作者有不同的见解。MORB中可以根据Rb/Nd≤0.15、K/Ti≤0.11、(La/Sm)_N≤0.8、K_2O/TiO_20.09、ΔNb=1.74+lg(Nb/Y)-1.92lg(Zr/Y)0、(La/Sm)_N1、100K_2O/TiO_2≤13等7种指标来识别N-MORB,否则为E-MORB。究竟何种标志区分效果较好、比较适合大多数MORB的情况?学术界对此还较少有人讨论。为此,本文尝试利用大数据方法,采用全球全体扩张中心数据,对上述7种标志进行对比,发现(La/Sm)_N1的标志比较适合大多数MORB的情况。为此,我们将(La/Sm)_N1和(La/Sm)_N≥1的所有数据,选取La、Ce、Pr、Nd、Sm、Eu、Gd、Tb、Dy、Ho、Er、Tm、Yb、Lu、Ba、Cs、Hf、K、Nb、Pb、Rb、Sc、Sr、Ta、Th、Ti、Tl、U、V、Y、Zr等31个元素,利用两两元素对数比值进行投图,并计算85%置信度的置信椭圆交叠率,共得出36856个元素对组合,根据最小交叠率的原则,得出使用稀土元素La、Ce、Pr、Sm和其他高场强元素Nb、Zr、Hf、Y之间的比值关系判别效果较好。我们又利用以上得出的8种元素进行投图判定,发现以La为分子或以La/Hf、La/Zr元素比值做为区分标志可以得出更好的结果。因此建议考虑应用以上元素之间的相关关系共同判定N-MORB与E-MORB。  相似文献   

A geometric-based approach for road matching on multi-scale datasets using a genetic algorithm   总被引：1，自引：0，他引：1  

Alireza Chehreghan 《制图学和地理信息科学》2018,45(3):255-269

Object matching is used in various applications including conflation, data quality assessment, updating, and multi-scale analysis. The objective of matching is to identify objects referring to the same entity. This article aims to present an optimization-based linear object-matching approach in multi-scale, multi-source datasets. By taking into account geometric criteria, the proposed approach uses real coded genetic algorithm (RCGA) and sensitivity analysis to identify corresponding objects. Moreover, in this approach, any initial dependency on empirical parameters such as buffer distance, threshold of spatial similarity degree, and weights of criteria is eliminated and, instead, the optimal values for these parameters are calculated for each dataset. Volunteered geographical information (VGI) and authoritative data with different scales and sources were used to assess the efficiency of the proposed approach. According to the results, in addition to an efficient performance in various datasets, the proposed approach was able to appropriately identify the corresponding objects in these datasets by achieving higher F-Score.  相似文献   

Design principles for origin-destination flow maps     

Bernhard Jenny  Daniel M. Stephen  Ian Muehlenhaus  Brooke E. Marston  Ritesh Sharma  Eugene Zhang 《制图学和地理信息科学》2018,45(1):62-75

Origin-destination flow maps are often difficult to read due to overlapping flows. Cartographers have developed design principles in manual cartography for origin-destination flow maps to reduce overlaps and increase readability. These design principles are identified and documented using a quantitative content analysis of 97 geographic origin-destination flow maps without branching or merging flows. The effectiveness of selected design principles is verified in a user study with 215 participants. Findings show that (a) curved flows are more effective than straight flows, (b) arrows indicate direction more effectively than tapered line widths, and (c) flows between nodes are more effective than flows between areas. These findings, combined with results from user studies in graph drawing, conclude that effective and efficient origin-destination flow maps should be designed according to the following design principles: overlaps between flows are minimized; symmetric flows are preferred to asymmetric flows; longer flows are curved more than shorter or peripheral flows; acute angles between crossing flows are avoided; sharp bends in flow lines are avoided; flows do not pass under unconnected nodes; flows are radially distributed around nodes; flow direction is indicated with arrowheads; and flow width is scaled with represented quantity.  相似文献   

基于优化经验模态分解和聚类分析的滑坡位移智能预测研究     

张凯  张科  保瑞  刘享华  齐飞飞 《岩土力学》2021,(1):211-223

针对三峡库区"阶跃式"滑坡的变形特征,提出了一种新的滑坡位移预测方法。以白水河滑坡ZG118和XD-01监测点位移数据为例,采用基于软筛分停止准则的经验模态分解(SSSC-EMD)将累计位移-时间曲线和影响因子时间序列自适应地分解为多个固有模态函数(IMF),并采用K均值(K-Means)聚类法对其进行聚类累加,得到有物理含义的位移分量(趋势性位移、周期性位移以及随机性位移)和影响因子分量(高频影响因子和低频影响因子)。使用最小二乘法对趋势性位移进行拟合预测;采用果蝇优化-最小二乘支持向量机(FOA-LSSVM)模型对周期性位移和随机性位移进行预测。将各位移分量预测值进行叠加处理,实现滑坡累计位移的预测。研究结果表明,所提出的(SSSC-EMD)-K-Means-(FOA-LSSVM)模型能够预测"阶跃式"滑坡的位移变化规律,且预测精度高于传统的支持向量机回归(SVR)、最小二乘支持向量机(LSSVM)模型;并通过改变训练集长度,进行单因素分析,发现其与预测精度之间呈正相关关系。  相似文献   

南秦岭柞水—山阳矿集区金铜矿床成矿规律与找矿方向     

王瑞廷  冀月飞  成欢  刘凯  张启  李弦  任涛 《现代地质》2021,35(6):1487-1503

南秦岭柞水—山阳矿集区地质构造和岩浆活动强烈,矿床(点)成群成带分布,成矿条件良好。在长期找矿实践、成矿地质背景分析和典型矿床解剖的基础上,综合研究认为,区内金矿主要受EW向断裂或EW向韧-脆性剪切带与NE向张扭性叠加构造控制,寒武系水沟口组、泥盆系星红铺组与大枫沟组是金的赋矿地层。金矿体呈近EW向大致等间距展布,单个矿体在延伸方向呈透镜状、哑铃状、囊状等,具尖灭再现特征,构造叠加部位矿体厚大、品位较高。区内金矿床类型多为中-低温热液型、远成低温热液型,成矿时代为印支—燕山期。夏家店等已知金矿床深部及外围、区域断裂旁侧次级近EW向与NNE向断裂交汇部位、构造转折端、构造虚脱部位等是寻找金矿的有利靶区。铜矿分布于山阳—凤镇大断裂两侧,成矿类型以斑岩型-矽卡岩型为主,构造热液改造型、隐爆角砾岩型次之。斑岩型-矽卡岩型铜(钼)矿受燕山期构造-岩浆活动控制,赋存于燕山期斑岩体与围岩接触带内;矿体产状多受岩体与围岩接触面控制,呈似层状、透镜状产出。燕山期中酸性小岩体及其与围岩的接触部位、东西向三级断裂带附近是寻找铜(钼)矿的首选靶区。本次研究建立了柞水—山阳矿集区金铜矿床区域成矿模式,总结了找矿标志,通过成矿规律、成矿作用及物探、化探、遥感异常特征系统分析,认为区内找矿潜力巨大,并提出了3片金铜(钼)成矿远景区,指出下一步的找矿方向。  相似文献   

冻融循环下含节理类岩石试样剪切破坏特性     

徐新木  张耀平  付玉华  雷大星  邹雄刚 《吉林大学学报(地球科学版)》2021,51(2):483-494

为探究冻融循环对节理岩石抗剪力学特性的影响,针对冻融循环前后不同连通率节理岩石试样进行剪切特性试验,探究了节理试样的剪切破坏机制,对比分析了冻融前后节理试样抗剪强度的衰减趋势,分析了黏聚力及内摩擦角随岩石试样剪切破坏面分形维数的变化规律。结果表明：随冻融循环次数的增加,节理试样剪切应力-位移曲线发生显著变化,峰值剪应力出现明显下降,黏聚力及内摩擦角对比冻融前试样出现明显劣化,并且随节理试样连通率的增加,劣化程度加剧;在节理连通率相同时,随冻融循环次数的增加,剪切破坏面的分形维数呈现近指数函数递增的趋势,随分形维数的增加,节理试样的黏聚力损伤因子、内摩擦损伤因子也呈现指数函数增加的趋势;在冻融循环次数相同时,内摩擦角损伤因子随节理连通率的增大呈先减小后增大的趋势,而黏聚力损伤因子在冻融循环次数为30次前后分别呈递增和先减后增的趋势。  相似文献