地层倾角对转换波动校速度分析的影响     

殷全增 《中国煤炭地质》2010,(7):52-60

动校正速度的求取是三维转换波数据处理的重要环节,其精度高低对转换波的叠加成像质量影响很大。理论上转换波的速度求取受包括界面倾角在内的多种因素影响,但实际应用时这些因素往往被忽略。为证明倾角对动校速度的影响程度,依据前人的研究成果,模拟倾斜地层计算了不同倾角条件下二维测线CCP道集、三维全方位CCP道集PS波动校正速度,并对由不同倾角引起的计算精度差异进行了研究。研究结果表明,对于二维转换波CCP道集,界面倾角不同,动校拉平的速度会差别较大,即使如此也总能实现很大倾角范围内的CCP道集的同相叠加,获得较好的成像质量;对于三维全方位CCP道集,当界面倾角超过一定范围,无论怎样进行精细扫描,得到的都只能是适合特定方位的速度,无法得到适合任意方位的动校扫描速度,随着界面倾角的减小,利用速度扫描的办法可以在一定的偏移距范围内将来自不同方位的记录较平,界面倾角越小,可以校平的偏移距越大;另外由于道集内的地震记录依赖视倾角的动校正速度,在反射界面倾斜的情况下,方位不同,动校正速度不同,致使二维反射PS波资料往往比三维反射PS波资料容易叠加成像。  相似文献   

波束角偏差对多波束测量的影响及校正     

董庆亮  孙昊  张哲  李明叁 《海洋测绘》2014,34(5):27-30

波束角偏差是影响多波束系统测量精度的因素之一,严重时导致测量的海底地形成凸凹形状的伪地形。论述了波束角偏差产生的原因以及对多波束系统测量精度的影响,介绍了借用EM系列多波束系统配置的横向参数校准软件对波束角偏差进行校正的方法,经实际应用,该方法很好地校正了波束角偏差,提高了测量数据的精度。  相似文献   

��������ϵ��GNSS�����������ת�������о�     

����  ����  ��־��  ���³�  ��� 《大地测量与地球动力学》2014,34(5):114-119

??GNSS??????????У??轫GNSS?????????????????????????????????????????GNSS???????????????????????????????????????????????????????????????????????????????????????????????????????????????е???????????????????????е????λ???ó????????????????????????????????????????????????????????????????о???GNSS????????????????????????????????????????????????????????????????????????????????????????????????????????????  相似文献   

������Ƕ�Ȩ�ĵ������ݼ�Ȩ������С����ƽ������о�     

苍桂华  李明峰  岳建平 《大地测量与地球动力学》2014,34(3):95-98

?????????????????λ???????????????????????????????????С????????????????÷?????????????С??????????????????????????????????????и?????????????????????????????????????????3????????????????????????????????????С?????????????С??????????÷??????????????????????  相似文献   

Selection of Less Biased Threshold Angles for SAM Classification Using the Real Value–Area Fractal Technique     

Hadi Shahriari  Hojjatollah Ranjbar  Mehdi Honarmand  Emmanuel John M. Carranza 《Resource Geology》2014,64(4):301-315

The accuracy of classification of the Spectral Angle Mapping (SAM) is warranted by choosing the appropriate threshold angles, which are normally defined by the user. Trial‐and‐error and statistical methods are commonly applied to determine threshold angles. In this paper, we discuss a real value–area (RV–A) technique based on the established concentration–area (C–A) fractal model to determine less biased threshold angles for SAM classification of multispectral images. Short wave infrared (SWIR) bands of the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) images were used over and around the Sar Cheshmeh porphyry Cu deposit and Seridune porphyry Cu prospect. Reference spectra from the known hydrothermal alteration zones in each study area were chosen for producing respective rule images. Segmentation of each rule image resulted in a RV–A curve. Hydrothermal alteration mapping based on threshold values of each RV–A curve showed that the first break in each curve is practical for selection of optimum threshold angles. The hydrothermal alteration maps of the study areas were evaluated by field and laboratory studies including X–ray diffraction analysis, spectral analysis, and thin section study of rock samples. The accuracy of the SAM classification was evaluated by using an error matrix. Overall accuracies of 80.62% and 75.45% were acquired in the Sar Cheshmeh and Seridune areas, respectively. We also used different threshold angles obtained by some statistical techniques to evaluate the efficiency of the proposed RV–A technique. Threshold angles provided by statistical techniques could not enhance the hydrothermal alteration zones around the known deposits, as good as threshold angles obtained by the RV–A technique. Since no arbitrary parameter is defined by the user in the application of the RV‐A technique, its application prevents introduction of human bias to the selection of optimum threshold angle for SAM classification.  相似文献   

相干能量梯度与属性比例融合在断裂构造解释中的应用     

赵喜彬 《中国煤炭地质》2014,(10):69-72

相干能量梯度体现了相干数据的振幅变化,它比较有利于突出一些细小的地质特征变化,其属性比例融合是将两个数据体按照一定比例融合在一起生成新的数据体,而新数据体能更好的反映地质特征。实例表明,与相干属性相比,相干能量梯度属性对一些细小构造更敏感,而且可以根据不同方向、时间的切片对不同走向的断层进行追踪;与常规地震时间剖面相比,属性比例融合后的属性剖面,可以在剖面中显示两种属性体的断裂构造特性,减少单一属性体的不确定性。  相似文献   

表面接触角的测量及表面张力在宝玉石鉴定中的应用     

鲍雪  陆太进  魏然  张勇  李海波  陈华  柯捷 《岩矿测试》2014,33(5):681-689

表面张力是固体表面重要的物理化学参数之一,其大小与温度和界面两相物质的性质有关。基于Young方程的推导,使用接触角测量法计算固体表面张力已被广泛应用于表面科学和工程领域。宝玉石材料大多具有光洁的表面,在接触角测量的准确性方面较其他表面不均一的固体材料具有明显的技术优势。本文运用现代仪器(FTA200动态接触角测量仪)测量了15个天然和合成宝玉石品种(钻石、合成碳硅石、合成立方氧化锆、碧玺、托帕石、翡翠、琥珀等),以及经覆膜和充填2种处理方法的宝玉石样品(镀膜钻石、覆膜托帕石、覆膜翡翠、覆膜琥珀、充填碧玺)的表面接触角,并运用公式计算其表面张力。测试数据表明,不同品种宝玉石的接触角数值存在差异,如钻石的接触角值为56.68°,其仿制品立方氧化锆的接触角值为37.79°;覆膜处理与未经覆膜处理的天然宝玉石的接触角数值差异明显,如琥珀的接触角值为92.49°,覆膜琥珀的接触角值为66.49°;充填处理宝玉石接触角的测试由于控制液滴的大小受条件限制操作难度较大,测试结果不能准确表达为裂隙中充填物的接触角数值,故充填处理的宝石不宜采用此方法进行区分。研究表明,对于部分宝玉石品种和覆膜处理宝玉石,其表面接触角及表面张力数值差异显著,可以作为宝玉石品种的辅助鉴定依据;尤其是运用接触角的差异对于宝玉石鉴定具有较好的判别性,能够对不同品种的天然宝玉石与表面覆膜的宝玉石样品进行有效区分。与常规宝石检测方法(如红外光谱、折射率测量方法)对比,接触角测量方法具有测量准确、操作简便,不破坏样品的特点,符合宝玉石无损鉴定的基本原则,且能够安全快速地测量高折射率宝石,可以解决宝玉石表面覆膜等与表面物性相关的检测疑难问题。  相似文献   

On the topography influence on subsidence due to horizontal underground mining using the influence function method     

《Computers and Geotechnics》2014

The classical influence function method is widely used in mining subsidence prediction, but its use is typically limited to predicting the subsidence associated with horizontal stratiform underground mining when the ground surface is flat. By investigating the topography influence on subsidence under simplified mining conditions, this study attempts to improve the original influence function method to take topographic variations into account. New asymmetrical influence functions are used to simulate element subsidence. Integrating this asymmetrical approach into the influence function method increases the realism of subsidence computation when compared to the numerical simulation results. The maximum subsidence value and influence angle got from field data are introduced into the improved method, then two field subsidence cases are studied and acceptable comparison results are achieved. This improved method should serve as the foundation for future work.  相似文献   

贵州海马谷地区金矿矿床特征及成矿模式          下载免费PDF全文

曾昭光  杨恩林  季国松  向通 《贵州地质》2014,31(4):261-266

本文对海马谷地区金矿进行调查,在贵州安龙海马谷发现北东向陡倾角断层控制金矿体,其围岩为二叠系茅口组生物灰岩,矿石为硅化灰岩角砾岩。根据本次调查及收集已有勘查研究成果,建立了该区的成矿模式,认为该区北东向陡倾角断层是下一步该区重要的找矿目标。  相似文献   

掩星弯角资料同化在一次暴雨过程中的应用   总被引：1，自引：0，他引：1  

余江林  寇正  项杰  丁鹏飞 《湖北气象》2014,(2):181-186

使用GPS掩星弯角资料和NCEP预报场资料,采用GSI(Grid-point Statistical Interpolation)变分同化系统,对同化掩星弯角资料前后的分析场以及数值预报结果进行详细比较,分析了弯角资料同化对2012年7月21日北京特大暴雨预报结果的影响。结果表明,同化掩星弯角资料对初始场中的温度、湿度产生明显影响,500 hPa和700 hPa温度调整中心量值达到0.5℃和-0.6℃,700 hPa湿度调整中心最大量值达-0.14 kg·kg-1;同化过程改变了强降水发生前流场结构,明显提高了强降水中心位置、雨带走向及范围、降水强度的预报准确性;由降水TS评分可知,200 mm以上大暴雨模拟改善效果明显,但对弱降水预报效果较差。  相似文献