Strain softening of K0-consolidated Changi sand under plane-strain conditions     

D. Wanatowski  J. Chu 《Acta Geotechnica》2006,1(1):29-42

Experimental results are presented in this paper to study the strain softening behaviour of a marine dredged sand under plane-strain conditions. K₀ consolidated drained and undrained tests were conducted using a new plane-strain apparatus to characterize the strain softening behaviour of the sand under plane-strain conditions. For medium dense specimens, strain softening and shear bands were observed to occur under both drained and undrained conditions. For very loose specimens, no shear bands were observed and critical states were reached within the homogeneous deformation region in both drained and undrained tests. Strain softening was observed to occur at small strain for very loose specimens under undrained conditions. Two types of strain softening, the homogenous softening and banding softening, were identified and the conditions for strain softening were established. The results obtained from this study were compared with the studies by Han and Vardoulakis (Géotechnique 41(1):49–78, 1991), Finno et al. (J Geotech Eng ASCE 122(6):462–473, 1996, Géotechnique 47(1):149–165, 1997) and Mokni and Desrues (Mech Cohes-Frict Mat 4:419–441, 1998).  相似文献   

Initiation and development of pull-apart basins with Riedel shear mechanism: insights from scaled clay experiments     

Nassima Atmaoui  Nina Kukowski  Bernhard Stöckhert  Diethard König 《International Journal of Earth Sciences》2006,95(2):225-238

Typical pull-apart structures were created in scaled clay experiments with a pure strike-slip geometry (Riedel type experiments). A clay slab represents the sedimentary cover above a strike-slip fault in the rigid basement. At an early stage of the development of the deformation zone, synthetic shear fractures (Riedel shears) within the clay slab display dilatational behaviour. With increasing basal displacement the Riedel shears rotate and open further, developing into long, narrow and deep troughs. The shear displacement and the low angle with the prescribed principal basal fault set them apart from tension gashes. At a more evolved stage, synthetic segments (Y-shears) parallel to the basal principal fault develop and accommodate progressive strike-slip deformation. The Y-shears connect the tips of adjacent troughs developed from the earlier Riedel shears, resulting in the typical rhomb-shaped structures characteristic for pull-apart basins. The Strait of Sicily rift zone, with major strike-slip systems being active from the Miocene to the Present, comprises pull-apart basins at different length scales, for which the structural record suggests development by a mechanism similar to that observed in our experiments.  相似文献   

Phase Equilibria of the Lyngdal Granodiorite (Norway): Implications for the Origin of Metaluminous Ferroan Granitoids   总被引：2，自引：0，他引：2  

BOGAERTS  MICHEL; SCAILLET  BRUNO; AUWERA  JACQUELINE VANDER 《Journal of Petrology》2006,47(12):2405-2431

The Proterozoic (950 Ma) Lyngdal granodiorite of southern Norwaybelongs to a series of hornblende–biotite metaluminousferroan granitoids (HBG suite) coeval with the post-collisionalRogaland Anorthosite–Mangerite–Charnockite (AMC)suite. This granitoid massif shares many geochemical characteristicswith rapakivi granitoids, yet granodiorites dominate over granites.To constrain both crystallization (P, T, fO₂, H₂O in melt) andmagma generation conditions, we performed crystallization experimentson two samples of the Lyngdal granodiorite (with 60 and 65 wt% SiO₂) at 4–2 kbar, mainly at fO₂ of NNO (nickel–nickeloxide) to NNO + 1, and under fluid-saturated conditions withvarious H₂O–CO₂ ratios for each temperature. Comparisonbetween experimental phase equilibria and the mineral assemblagein the Lyngdal granodiorite indicates that it crystallized between4 and 2 kbar, from a magma with 5–6 wt % H₂O at an fO₂of NNO to NNO + 1. These oxidized and wet conditions sharplycontrast with the dry and reduced conditions inferred for thepetrogenesis of the AMC suite and many other rapakivi granitesworldwide. The high liquidus temperature and H₂O content ofthe Lyngdal granodiorite imply that it is not a primary magmaproduced by the partial melting of the crust but is derivedby the fractionation of a mafic magma. Lyngdal-type magmas appearto have volcanic equivalents in the geological record. In particular,our results show that oxidized high-silica rhyolites, such asthe Bishop Tuff, could be derived via fractionation of oxidizedintermediate magmas and do not necessarily represent primarycrustal melts. This study underlines the great variability ofcrystallization conditions (from anhydrous to hydrous and reducedto oxidized) and petrogenetic processes among the metaluminousferroan magmas of intermediate compositions (granodiorites,quartz mangerites, quartz latites), suggesting that there isnot a single model to explain these rocks. KEY WORDS: ferroan granitoids; crystallization conditions; experiments; Norway; Sveconorwegian; Bishop Tuff  相似文献   

Topography as a major factor in the development of arcuate thrust belts: insights from sandbox experiments   总被引：2，自引：0，他引：2  

F. O. Marques  P. R. Cobbold 《Tectonophysics》2002,348(4)

We have used sandbox experiments to investigate and to illustrate the effects of topography upon the development of arcuate thrust belts. In experiments where a sand pack shortened and thickened in front of an advancing rectilinear piston, the geometry of the developing thrust wedge was highly sensitive to variations in surface topography. In the absence of erosion and sedimentation, the surface slope tended to become uniform, as predicted by the theory of critical taper. Under these conditions, the wedge propagated by sequential accretion of new thrust slices. In contrast, where erosion or sedimentation caused the topographic profile to become irregular, thrusts developed out of sequence. For example, erosion throughout a hinterland caused underlying thrusts to remain active and inhibited the development of new thrusts in the foreland. Where initial topography was irregular in plan view, accreting thrusts tended to be arcuate. They were convex towards the foreland, around an initially high area; concave towards the foreland, around an initially low area. Initial plateaux tended to behave rigidly, while arcuate thrust slices accreted to them. Thrust motions were radial with respect to each plateau. Within transfer zones to each side, fault blocks rotated about vertical axes and thrust motions were oblique-slip. At late stages of deformation, the surface slope of the thrust wedge tended towards a uniform value. Initial mountains of conical shape (representing volcanoes) also escaped deformation, except at depth, where they detached. Arcuate thrust slices accreted to front and back. Where a developing thrust wedge was subject to local incision, accreting thrust slices dipped towards surrounding areas of high topography, forming Vs across valleys.Arcuate structural patterns are to be found around the three highest plateaux on Earth (Tibet, Pamirs and Altiplano) and around the Tromen volcanic ridge in the Neuquén Basin of northern Patagonia. We infer that these areas behaved in quasi-rigid fashion, protected as they were by their high topography.  相似文献   

Fluid-bearing alkaline carbonate melts as the medium for the formation of diamonds in the Earth''s mantle: an experimental study     

N. Pal''yanov  A. G. Sokol  M. Borzdov  A. F. Khokhryakov 《Lithos》2002,60(3-4):145-159

We have experimentally studied the formation of diamonds in alkaline carbonate–carbon and carbonate–fluid–carbon systems at 5.7–7.0 GPa and 1150–1700 °C, using a split-sphere multi-anvil apparatus (BARS). The starting carbonate and fluid-generating materials were placed into Pt and Au ampoules. The main specific feature of the studied systems is a long period of induction, which precedes the nucleation and growth of diamonds. The period of induction considerably increases with decreasing P and T, but decreases when adding a C–O–H fluid to the system. In the range of P and T corresponding to the formation of diamonds in nature, this period lasts for tens of hours. The reactivity of the studied systems with respect to the diamond nucleation and growth decreases in this sequence: Na₂CO₃–H₂C₂O₄·2H₂O–C>K₂CO₃–H₂C₂O₄·2H₂O–C>>Na₂CO₃–C>K₂CO₃–C. The diamond morphology is independent of P and T, and is mainly governed by the composition of the crystallization medium. The stable growth form is a cubo-octahedron in the Na₂CO₃ melt, and an octahedron in the K₂CO₃ melt. Regardless of the composition of the carbonate melt, only octahedral diamond crystals formed in the presence of the C–O–H fluid. The growth rates of diamond varied in the range from 1.7 μm/h at 1420 °C to 0.1–0.01 μm/h at 1150 °C, and were used to estimate, for the first time, the possible duration of the crystallization of natural diamonds. From the analysis of the experimental results and the petrological evidence for the formation of diamonds in nature, we suggest that fluid-bearing alkaline carbonate melts are, most likely, the medium for the nucleation and growth of diamonds in the Earth's upper mantle.  相似文献   

零价铁去除Cr（Ⅵ）的批实验研究   总被引：9，自引：0，他引：9       下载免费PDF全文

黄园英刘菲  鲁雅梅 《岩石矿物学杂志》2003,22(4):349-351

零价铁去除Cr(Ⅵ)的一系列批实验结果表明：水溶液中发生的氧化还原反应符合准一级反应；对于相同粒度的铁屑(比表面积2．89m^2／g)，固液比由05g／100mL增加到2．0g／100mL，Cr(Ⅵ)质量浓度达到排放标准所需反应时间从26．7min降为3．6min；在固液比相同、原水中Cr(Ⅵ)质量浓度不超过30mg／L时，原水质量浓度增大，达到饮用水标准的反应时间增加；其他条件相同，升高温度可提高零价铁与Cr(Ⅵ)的反应速率。  相似文献   

青藏高原冬季积雪异常对东,南亚夏季风影响的初步数值模拟研究   总被引：10，自引：2，他引：10  

范广洲  罗四维 《高原气象》1997,16(2):140-142

利用一个耦合了简化的简单生物圈模式的大气环流谱模式（ＳＳｉＢ－ＧＣＭ），初步探讨了青藏高原冬季积雪异常对东、南亚夏季季风环流和降水的影响及其机理。结果表明，高原地区积雪增加将使随后地夏季东、南来季风明显减弱，主要表现为东、南亚季风区降水减少，索马里急流、印度季风的印度西南气流弱弱。另外，还提出欧亚大陆雪盖与整个高原雪盖和高原东部雪盖对东、南亚夏季风影响的敏感问题。与欧亚大陆雪盖相比，高原雪盖是影响  相似文献   

陆面特征非均一作用参数化及其对区域气候影响的数值模拟试验   总被引：2，自引：1，他引：2  

张耀存  钱永甫 《气象科学》1997,17(2):125-130

本文首先改进了陆地下垫面特征非均一性的次网格尺度参数化方法，然后利用三维地气耦合的区域气候模式，设计一系列值试验，研究了下垫面特征改变对区域气候环境变化的影响，主要分析了陆地表面特征变化对我国苏南附近地区夏季温度化的影响，结果表明采用地下垫面特征非均一作用的次网格尺度参数化方法对于改进数值模拟结果的质量有一定效果。  相似文献   

Size of a debris flow deposition: model experiment approach   总被引：5，自引：0，他引：5  

X. Liu 《Environmental Geology》1996,28(2):70-77

 The prediction of the dangerous extent of a debris flow deposition is of vital importance, but difficult to achieve. Precise prediction of the depositional boundary of a debris flow event is impossible, but the size of a debris flow deposition could provide some estimates of the area, length, width, and thickness of a debris flow deposition. Based on in situ depositional experiments performed on a debris flow creek just after debris flows, a rule of thumb expressed by a group of equations containing the multiple-variate nonlinear functions is proposed in this paper. The interrelationships between the size and the causation also are discussed, and some empirical formulae to calculate the causative parameters for different regions are presented. Received: 24 April 1995 · Accepted: 21 June 1995  相似文献   

氧化亚铁硫杆菌水文地球化学作用实验初步研究     

李晓 《矿物岩石》1996,16(3):72-77

在某些地球化学环境中，微生物对水─岩相互作用有重要影响。本文通过氧化亚铁硫杆菌与硫化物相互作用试验，初步研究了氧化亚铁硫杆菌作用引起水─岩介质变化特征，分析了氧化亚铁硫杆菌水文地球化学作用的一些规律。  相似文献