增强型AlGaN/GaN高电子迁移率晶体管高温退火研究     

王冲  全思  马晓华  郝跃  张进城  毛维 《海洋学报》2010,32(10):7333-7337

深入研究了两种增强型AlGaN/GaN高电子迁移率晶体管(HEMT)高温退火前后的直流特性变化.槽栅增强型AlGaN/GaN HEMT在500 ℃ N₂中退火5 min后,阈值电压由0.12 V正向移动到0.57 V,器件Schottky反向栅漏电流减小一个数量级.F注入增强型AlGaN/GaN HEMT在 400 ℃ N₂中退火2 min后,器件阈值电压由0.23 V负向移动到-0.69 V,栅泄漏电流明显增大.槽栅增强型器件退火过程中Schottky有效势垒  相似文献   

Analytical method of radiation by a wave energy device with dual rectangular floating bodies     

WANG Wensheng  YOU Yage  ZHANG Yunqiu  WU Bijun  YE Yin 《海洋学报(英文版)》2010,29(3):106-115

The system with one floating rectangular body on the free surface and one submerged rectangular body has been applied to a wave energy conversion device in water of finite depth. The radiation problem by this device on a plane incident wave is solved by the use of an eigenfunction expansion method, and a new analytical expression for the radiation velocity potential is obtained. The wave excitation force is calculated via the known incident wave potential and the radiation potential with a theorem of Haskind employed. To verify the correctness of this method, an example is computed respectively through the bound element method and analytical method. Results show that two numerical methods. are in good agreement, which shows that the present method is applicable. In addition, the trends of hydrodynamic coefficients and wave force are analyzed under different conditions by use of the present analytical method.  相似文献   

Loss of energy dissipation capacity from the deadzone in linear and nonlinear viscous damping devices   总被引：1，自引：1，他引：0  

Mai Tong Thomas Liebner 《地震工程与工程振动(英文版)》2007,6(1):11-20

In a viscous damping device under cyclic loading, after the piston reaches a peak stroke, the reserve movement that follows may sometimes experience a short period of delayed or significantly reduced device force output. A similar delay or reduced device force output may also occur at the damper’s initial stroke as it moves away from its neutral position. This phenomenon is referred to as the effect of “deadzone”. The deadzone can cause a loss of energy dissipation capacity and less efficient vibration control. It is prominent in small amplitude vibrations. Although there are many potential causes of deadzone such as environmental factors, construction, material aging, and manufacture quality, in this paper, its general effect in linear and nonlinear viscous damping devices is analyzed. Based on classical dynamics and damping theory, a simple model is developed to capture the effect of deadzone in terms of the loss of energy dissipation capacity. The model provides several methods to estimate the loss of energy dissipation within the deadzone in linear and sublinear viscous fluid dampers. An empirical equation of loss of energy dissipation capacity versus deadzone size is formulated, and the equivalent reduction of effective damping in SDOF systems has been obtained. A laboratory experimental evaluation is carried out to verify the effect of deadzone and its numerical approximation. Based on the analysis, a modification is suggested to the corresponding formulas in FEMA 356 for calculation of equivalent damping if a deadzone is to be considered.  相似文献   

Estimation of peak relative velocity and peak absolute acceleration of linear SDOF systems     

Jianwei Song Yi-Lun Chu Zach Liang George C. Lee 《地震工程与工程振动(英文版)》2007,6(1):1-10

In the seismic analysis and design of structures, the true velocity and absolute acceleration are usually approximated by their corresponding pseudo-values. This approach is simple and works well for structures with small damping (say, less than 15%). When the damping of a structure is enhanced for the purpose of response reduction, it may result in large analysis and design errors. Based on theory of random vibration and the established mechanism of seismic response spectra analysis, a method is developed (1) to predict the relative velocity spectra with any damping ratio level directly from the 5% standard pseudo-acceleration spectrum; and (2) to estimate the peak absolute acceleration. The accuracy of both is validated by using two selected ensembles of ground motion records.  相似文献   

Primary cracking of kerogens. Experimenting and modelling C₁, C₂–C₅, C₆–C₁₅ and C₁₅₊ classes of hydrocarbons formed     

J. Espitali  P. Ungerer  I. Irwin  F. Marquis 《Organic Geochemistry》1988,13(4-6)

Mathematical models of hydrocarbon formation can be used to simulate the natural evolution of different types of organic matter and to make an overall calculation of the amounts of oil and/or gas produced during this evolution. However, such models do not provide any information on the composition of the hydrocarbons formed or on how they evolve during catagenesis.From the kinetic standpoint, the composition of the hydrocarbons formed can be considered to result from the effect of “primary cracking” reactions having a direct effect on kerogen during its evolution as well as from the effect of “secondary cracking” acting on the hydrocarbons formed.This report gives experimental results concerning the “primary cracking” of Types II and III kerogens and their modelling. For this, the hydrocarbons produced have been grouped into four classes (C₁, C₂–C₅, C₆–C₁₅ and C₁₅₊). Experimental data corresponding to these different classes were obtained by the pyrolysis of kerogens with temperature programming of 4°C/min with continuous analysis, during heating, of the amount of hydrocarbons corresponding to each of these classes.The kinetic parameters of the model were optimized on the basis of the results obtained. This model represents the first step in the creation of a more sophisticated mathematical model to be capable of simulating the formation of different hydrocarbon classes during the thermal history of sediments. The second step being the adjustment of the kinetic parameters of “secondary cracking”.  相似文献   

用非色散红外气体分析仪进行大气CO2本底浓度的测量   总被引：7，自引：1，他引：7  

温玉璞  季秉法 《应用气象学报》1993,4(4):476-480

按WMO关于开展全球CO2监测的要求，在对引进设备进行改进的情况下，建立了我国开展大气CO2本底浓度连续测量的红外气体分析测量系统及有关方法。系统的测量精度优于0.1ppm，完全满足全球本底测量的要求，并具有较好的国际可比性。在此基础上，首次取得了我国大陆上空大气CO2的本底浓度资料。  相似文献   

多功能雾化室在ICP—AES中的应用研究     

吴联源  傅国民 《岩矿测试》1991,10(4):274-278

本文研究了一种多功能雾化室装置,以探索ICP-AES技术中溶液进样的新方式;并对雾化系统的主要参数进行测试,取得最佳的匹配条件。该雾化室装置包括旋流雾化、循环雾化和氢化-雾化等系统,可在同一操作条件下进行工作,适应多种分析的需要。并可任意选择合适的雾化射程来增强元素谱线强度的信背比和雾化的稳定性,以达到改善分析的精密度和检出限。  相似文献   

冲击反循环工程钻机自动同步机构的原理          下载免费PDF全文

喻重山  孙孝庆 《探矿工程》1994,(4):1-3

采用行星齿轮差速机构作为ＧＣＦ－１５００型冲击反循环工程钻机的自动同步机构，已经获得成功。分析了该机构的运动学原理和力平衡原理。该机构具有结构简单、工作可不的特点。  相似文献   

DPP100－3型钻机改型设计中的几个问题          下载免费PDF全文

张宝胜 《探矿工程》1994,(4):9-11,15

讨论了ＤＰＰ１００－３型钻机在改型设计中动力匹配，改换汽车底盘的轴荷分配，改装部分的传动装置布置等，主要以选用ＣＡ１４１Ｓ型汽车底盘的改型设计为例进行说明。  相似文献   

大气中微量气体的红外吸收          下载免费PDF全文

王松皋  张广顺 《应用气象学报》1995,6(1):70-75

文章介绍了测定大气中微量气体CO2与CH4透过率的试验。所用的主要设备是FTIR分光计及可变光程吸收池。文中叙述了主要实验结果与数据处理方法，同时用FASCODE-2程序计算了对应实验条件下CO2与CH4的透过率，并与实验结果作了比较。  相似文献