云南地区震源破裂长度与震级的经验关系   总被引：3，自引：0，他引：3       下载免费PDF全文

李忠华  苏有锦  蔡明军  张俊伟  刘祖荫 《地震工程学报》1999,21(3):331-333

从云南地区１９６５ 年有台网记录以来主震震级 Ｍ Ｓ≥４ ．９ 的地震序列中选取５１ 个序列,根据直接余震的平面分布统计得到震源的破裂长度,用最小二乘线性回归模型得到了３ 种震级范围的破裂长度与主震震级的经验关系式  相似文献   

Regional seismicity triggered by the Hyogo-Ken Nanbu, Japan, M =7.2 earthquake on January 17, 1995     

GUI-PING LIU 《地震学报(英文版)》1999,12(3):277-284

The time and spatial feature of the regional seismicity triggered by the Hyogo-Ken Nanbu, Japan, M=7.2 earthquake on January 17,1995, was studied. The concerned region is about several hundred kilometers in length and breadth surrounding the epicenter (33°～37°N, 133°～138°E). It is divided into 16 subregions. The seismicity of these subregions from January of 1976 to June of 1996 has been analyzed. It is showed that,① there were significant seismicity changes in 10 subregions triggered by the Hyogo-Ken Nanbu, Japan, M=7.2 earthquake on January 17, 1995. These changes passed a Z statistic test exceeding 0.95 confidence level and the greatest epicenter distance of these subregions was 280 km;②seismicity changes were triggered within 1～5 days in three subregions near the main shock while in other subregions the seismicity changes were triggered within several ten days after the main shock;③ the greatest triggered event is 5.4, which is about the same size as the greatest aftershock;④the regional stress change resulted from the main shock may be the triggered mechanism of the regional seismicity.  相似文献   

2014年8月云南鲁甸M_S 6.5地震典型地表破裂特征     

李晓  裴向军  刘洋 《震灾防御技术》2017,12(2):338-345

北京时间2014年8月3日16时30分,云南省鲁甸县发生了M_S 6.5地震,本次地震的发震构造为包谷垴-小河断裂。野外调查发现,王家坡不稳定斜坡上的地表破裂在整个破裂带中比较具有代表性,其地表破裂带整体走向N45°W-N50°W,并且由剪切破裂、张剪切破裂、压剪切破裂、张性破裂以及鼓包等典型地表破裂组成。其中左、右地表破裂边界与发震断层的出露位置一致,由断层错动造成;而部分地表破裂与断层的位置不重合,其成因分为2种,一种是发震断层导致的一些次级地表破裂,另一种是地震引发的滑坡后缘破裂。地表破裂类型和基本组合特征显示出王家坡潜在不稳定斜坡上的地表破裂带具有左旋走滑的性质。  相似文献   

基于库仑应力变化分析巴颜喀拉地块东端的强震相互关系   总被引：10，自引：3，他引：7       下载免费PDF全文

徐晶  邵志刚  刘静  季灵运 《地球物理学报》2017,60(10):4056-4068

本研究基于分层黏弹介质模型,考虑同震位错效应和震后黏滞松弛效应,分析巴颜喀拉地块东端1976年松潘地震序列、2008年汶川8.0级地震、2013年芦山7.0级地震和2017年九寨沟7.0级地震等多次大地震的可能存在的触发关系,计算大地震引起的周边各主要断裂的库仑应力变化.结果显示,1976年松潘地震序列各次地震间关系密切,存在明显的相继触发作用;综合考虑同震和震后效应,汶川8.0级地震对同属于龙门山断裂带的芦山7.0级地震有触发作用,且震后效应影响不可忽略;1976年地震序列,特别是1976年8月16日7.2级地震促进了2017年8月8日九寨沟7.0级地震的发生;汶川地震对九寨沟地震的影响研究中,采用不同的汶川地震同震位错模型,计算结果有差异.综合考虑多次大地震对周边断裂带的影响,龙门山断裂带南段、鲜水河断裂带中南段、平武—青川断裂北段、灌县—安县断裂北段、文县断裂的累积库仑应力增加显著,巴颜喀拉地块东端的东昆仑断裂带东段、迭部—白龙江断裂带西段以及金沙江断裂带库仑应力亦有所增加.综合考虑各重要断裂带已有的大地震危险性分析结果和库仑应力变化计算结果,龙门山断裂带南段、鲜水河断裂带中南段、东昆仑断裂带玛沁—玛曲段和金沙江断裂带的发震紧迫性有所增强,需引起关注.  相似文献   

新疆精河M_W6.3地震产生的静态应力变化研究     

李瑶  万永革  靳志同  黄骥超  刘兆才  杨帆 《中国地震》2017,33(4):671-681

利用精河M_W6.3地震有限断层破裂模型,计算了精河地震产生的位移场、应力场、周围主要断层上的静态库仑应力变化以及主震对余震的触发作用。结果表明:(1)精河地震产生的地表隆升最大值约为6.6cm,沉降最大值约为1.8cm;水平位移方向呈现震中南北侧向震中汇聚、震中东西侧向外"流出"的特点。(2)精河地震产生的水平面应力场展布南北侧物质主要受到指向震中的拉张力作用,东西两侧物质主要受到因震中过剩物质东西向排出而导致的东西向挤压力作用。(3)震中西侧距震中约20km的库松木契克山前断裂中段和震中东北部距震中约50km的四棵树-古尔图南断裂西段的库仑应力加载均大于0.01MPa,即2处为地震危险区。(4)在震源深度为8~12km的余震事件中,约有85.5%处于库仑应力加载区,即受到主震的的触发作用;在深度为4~8km的余震事件中,约有87%受到主震的应力触发作用。  相似文献   

A SYSTEM OF CAPACITIVE HIGH-VOLTAGE PULSE RECHARGE/DISCHARGE AND ITS IMPLICATION ON EXPERIMENTALLY TRIGGERED EARTHQUAKE          下载免费PDF全文

ZHANG Zhi-he  GUO Yan-shuang  CHEN Shun-yun 《地震地质》2018,40(6):1417-1426

An external small disturbance may trigger seismic events when the fault is in a critical state. The problems related with earthquakes triggered by the dynamic stress such as blasting loads, impact loads, volcanic eruptions and strong earthquakes, have usually drawn wide concerns in earthquake science, and the corresponding research contents are quite extensive, including earthquake triggering mechanisms, triggering earthquake uncertainty, aftershock triggering, and so on. Among them, experimental research is an important way to understand the stress triggering conditions and physical mechanisms, such as the influence of load disturbance on fault friction traits, the influence of periodic disturbance of tidal stress on fault instability, etc., all of which can be gained through experimental investigations. Among them, "how to trigger" is a basic scientific problem to increase the understanding of earthquake prediction theory, thus receiving more attention. There are also some studies that focus on "what happened after the trigger", that is, the sliding instability generated by the triggering method, and then the evolution characteristics of the sliding instability process. The well-known experimental study of the super-shear rupture process is conducted by using the electric explosion method to trigger the fault instability, and the high-speed camera records the super-shear rupture during the fault instability. This means that when the trigger source is controllable, it is possible to generate different types of instability processes, and then to explore which earthquakes will be triggered at different time and space positions under different stress states by means of active triggering. The study of stability analysis and instability process has important scientific significance.A stable system of capacitive high-voltage pulse discharge and recharge is one of basic techniques for studying the triggered earthquakes in laboratory. Based on the wire electric explosion method, this paper develops a controllable trigger experiment system. By designing a new capacitive high-voltage pulse charge and discharge system, while considering the actual needs of monitoring and system timing, multiple functions are integrated into one system. Functionally, in addition to realizing the dynamic loading and unloading function of the wire electric explosion method, the discharge process can be monitored, and the triggering, synchronization and timing signal output is performed with other observation systems, thus realizing the whole process monitoring of the dynamic disturbance action. After testing, the following functions are achieved:1)The voltage and current of the high-voltage charging power supply system can be automatically adjusted, and the system can be shut off after charging; 2)Control modes include manual and remote controls. These two modes can control the recharge, release and pulse discharge of the high voltage capacitor; 3)The system can produce multi-channel synchronous output, which satisfy multiple systems working together. In particular, the remote sensing method greatly improves the experimental maneuverability and security; 4)The system has multiple sets of gas discharge tube to trigger discharge, with a wide range of discharge voltage of 500~5 000V; 5)Roche coil resistance integral current detection can meet the transient resistance, large current detection. Test results indicate that this system has good repeatability and stability with the same discharge energy and discharge energy regulator, which is conducive to carry out single channel trigger of high-pressure discharge experiment. In short, the new charging and discharging system can meet the requirements of experimental study of triggering earthquake. In addition, this system can be used to generate the stress disturbance under certain static and dynamic conditions, and then judge whether this kind of mechanical conditions in active fault systems is currently stable.In short, a controllable single-shot discharge system is developed by a capacitive high-voltage pulse discharge system, which provides a good technical basis for experimental research on triggering earthquakes. In addition, the new system also has application significance:1)multiple triggering output can simultaneously start multiple systems and improve the efficiency of observation. Fault instability is a characteristic of transient response, so, its observation requires high-speed acquisition equipment, which is difficult to control on observation; the trigger system is controllable, with active synchronization observation using physical parameters; 2)stress disturbance can be triggered under static and dynamic loads to detect the safety and stability of the fault system with active trigger.  相似文献   

利用近场高频GPS、 强地面运动和远场地震波形数据联合反演2008年汶川M_S8.0地震的震源时空破裂过程     

孟国杰  苏小宁  王振  廖华 《地震》2018,38(2):11-27

联合近场GPS测站1-Hz运动学位移、 强震仪加速度波形和全球台站P震相波形作为约束, 以时空滑动分布约束条件和ABIC模型参数选择方法, 结合先验的滑动方向变化范围, 反演2008年汶川M_S8.0地震的震源时空破裂过程, 给出了能够综合反映震源破裂过程的统一模型。 结果表明, 汶川地震总体上存在4个主要的破裂区, 最主要的一个破裂区位于震源东北40~120 km, 断层面上的最大位错量约为10 m, 主体滑动分布在2~20 km深度范围, 破裂达到地表; 第二个主体破裂区位于断层破裂带南段, 最大滑动量达到6 m; 另外2个主体滑动区位于断层破裂带北段, 但滑动破裂量小于断层南段破裂区的滑动量, 滑动破裂值最大值为4 m, 超过1 m的区域在走向上超过70 km。 反演得到的断层滑动模型的地震矩为9.5×10²¹ Nm, 相应的矩震级为M_W7.95。 汶川地震破裂表现为单侧破裂, 起始破裂在汶川下方16 km深度, 向东北方向一致性地传播, 过程持续~120 s。 在地震发生后0~10 s内, 破裂集中在震源起始破裂区, 滑动破裂值为~1.0 m, 之后破裂向东北方向扩展, 震后20~40 s是主要的破裂时段。 在40~60 s, 破裂跨越断层南段和北段。 在80~90 s破裂最大值开始下降, 在100~110 s时, 下降为~0.5 m, 在110~120 s时, 下降为~0.1 m。 加入近场GPS测站1-Hz 波形数据与近场强震仪波形和远场长周期体波联合反演, 提高了震源破裂模型的空间分辨率, 特别是浅部滑动破裂区的分辨率, 反演的最大滑动破裂值比不用1-Hz 波形数据反演的结果增大, 表明近场1-Hz GPS波形数据对于揭示汶川地震的时空破裂过程具有重要的作用。  相似文献   

Dating of rockfall damage in trees yields insights into meteorological triggers of process activity in the French Alps     

R. Mainieri  C. Corona  J. Chartoire  N. Eckert  J. Lopez-Saez  M. Stoffel  F. Bourrier 《地球表面变化过程与地形》2020,45(10):2235-2250

Rockfall release is a rather unpredictable process. As a result, the occurrence of rockfall often threatens humans and (infra)structures. The assessment of potential drivers of rockfall activity therefore remains a major challenge, even if the relative influence of rainfall, snowmelt, or freeze–thaw cycles has long been identified in short-term monitoring projects. In the absence of longer-term assessments of rockfall triggers and possible changes thereof, our knowledge of rockfall dynamics remains still lacunary as a result of the persisting scarcity of exhaustive and precise rockfall databases. Over the last decades, several studies have employed growth disturbances (GDs) in tree-ring series to reconstruct rockfall activity. Paradoxically, these series were only rarely compared to meteorological records. In this study, we capitalize on the homogeneity of a centennial-old reforestation plot to develop two reconstructions – R1 including only growth suppressions, and R2 based on injuries – with limited biases related to decreasing sample size and changes in exposed diameters back in time. By doing so, our study also and quite clearly highlights the large potential that protection forests have in terms of yielding reliable, multidecadal rockfall reconstructions. From a methodological perspective, we find no synchronicity between R1 and R2, as well as an absence of meteorological controls on rockfall processes in R1. This observation pleads for a careful selection of GDs in future reconstructions. In terms of process dynamics, we demonstrate that summer intense rainfall events (>10 mm day⁻¹) are the main drivers for rockfall activity at our study site. Despite the stringency of our detection procedure, correlations between rockfall activity and meteorological variables remain comparable to those reported in previous studies, as a result of the complexity and multiplicity of triggering factors. We therefore call for a more systematic coupling of tree-ring analysis with rockfall and microclimatic monitoring in future studies. © 2020 John Wiley & Sons, Ltd.  相似文献   

动态应力触发研究进展     

陈昊  冀战波  王琼  苏金波 《中国地震》2020,36(3):442-459

本文从库仑破裂应力与动态应力触发原理、观测事实与研究现状以及存在的问题与展望等3个方面介绍了动态应力触发的研究进展。其中,在主震对余震活动、强震对后续远场地震活动、不同破裂类型的地震之间及强震对火山(泥火山)的动态应力触发作用、一次大地震中子事件之间的动态应力触发关系以及动态应力触发的时间延迟等方面进行了详细讨论。分析认为,动态应力触发理论在解释震后余震分布、远程触发以及对火山触发性喷发等方面得到了较好的结果;动态应力触发可能会受断层破裂方式和方向的影响;大地震中子事件之间的动态应力触发关系对震源研究有重要意义;动态应力触发现象普遍存在时间延迟。  相似文献   

2018年斐济M_W8.2深震:高频辐射过程和发生原因          下载免费PDF全文

张喆  许力生  杜海林 《地球物理学报》2019,62(11):4279-4289

2018年8月19日,在斐济东部海域563 km深处发生了一次M_W8.2地震.我们首先挑选位于美国阿拉斯加地区的131个宽频带台站构成台阵,选用垂直分量0.5~2 Hz的高频信号,利用广义台阵反投影技术对这次地震的破裂过程进行了成像,然后基于破裂速度对地震的辐射效率进行了估计.结果表明,这次地震总体上呈单侧破裂,破裂方位在3.0°左右,破裂总长度约51 km,持续时间22 s,平均破裂速度为2.5 km·s^-1.但能量释放有2次高峰,形成两次子事件.第一次为前10 s,峰值在7 s左右,破裂速度为2.9 km·s^-1,辐射效率为45%.第二次为10~22 s,峰值在15 s左右,破裂速度为1.6 km·s^-1,辐射效率为26%.结合震源位置、震源机制、破裂速度以及辐射效率,我们认为这次地震是由于俯冲板块前缘受到下部地幔物质上浮阻力引起的剪切失稳所致,起初板块内部的脆性破裂表现突出,致使辐射效率较高,后来震源处高温高压下的熔融耗散特征逐渐凸现,致使辐射效率下降.  相似文献