273.15K下LiCl-Li2B4O7-H2O体系热力学性质的等压研究   总被引：2，自引：0，他引：2       下载免费PDF全文

杨吉民  姚燕  张爱云  宋彭生 《盐湖研究》2005,13(1):19-24

用等压法研究了273 15K下LiCl-Li2B4O7-H2O体系中纯盐水溶液(离子强度范围为LiCl0 2046～2 5055mol·kg-1,Li2B4O70 1295～0 3700mol·kg-1)以及混合盐水溶液(离子强度范围为0 0931～2 4911mol·kg-1)渗透系数和水活度;计算了LiCl-Li2B4O7-H2O体系的饱和蒸汽压,获得饱和蒸汽压、渗透系数随离子强度的变化规律。用实验数据以最小二乘法求取了LiCl和Li2B4O7纯盐参数及体系的混合盐参数,拟合的标准偏差分别为0 0077和0 026。用该模型计算的渗透系数值与实验结果取得合理的一致。同时研究结果与273 15K下LiCl-Li2SO4-H2O体系的渗透系数随离子强度变化的规律作了比较。本研究对完善低温下含锂、硼盐湖卤水体系的热力学模型和盐湖资源的综合开发利用具有重要意义。  相似文献   

2017年南丹Ms4.0地震前后重力变化     

文翔  毕熙荣  覃坚  柴现凡  冯骢 《大地测量与地球动力学》2019,39(4):344-350

利用广西及邻区2014~2017年流动重力观测资料，系统分析区域重力场变化及其与2017-07-15广西南丹MS4.0地震的关系，并结合GPS观测数据与地震地质调查成果，探讨区域重力场变化的时空分布特征及机理。结果表明：1）南丹M_S4.0地震前后，震区附近重力异常变化与主干断裂关系密切，反映沿控震断裂在2014~2017年间发生了引起地表重力变化效应的地壳变形和构造活动；2）差分重力图像表明，南丹M_S4.0地震前重力变化为“局部重力异常→四象限重力异常→重力反向变化发震”的过程；3）重力变化与GPS 观测反映的水平运动表明，南丹M_S4.0地震位于重力四象限分布中心部位及面压缩峰值附近，证明重力场和形变场动态变化对中强地震地点预测具有指示意义；4）天峨-南丹-环江一带是重力变化最剧烈地区，亦是水平形变面压缩过渡带，同时位于莫霍面等深线强烈变化地段、M_L3.0地震围空区、沿主断裂存在的低b值异常区。结合地震活动图像、定点前兆观测异常综合分析认为，该地区仍存在发生中强地震的可能。  相似文献   

TRMM卫星降水数据在小尺度流域的评估与应用          下载免费PDF全文

周萌  江善虎  任立良 《水文》2016,36(1):22-26

选取史灌河流域上游黄泥庄站以上集水区域为研究流域,以地面站点观测为基准数据,评估TRMM 3B42V7版本卫星降水数据的精度,并采用上述两种降水数据驱动栅格型新安江模型,模拟黄泥庄站日径流和月径流过程。结果表明:2001~2010年TRMM 3B42V7降水数据与雨量站数据累积量的偏差不大,仅为1.71%,但相关系数较低,采用TRMM降水数据模拟的日径流能基本再现黄泥庄站的日径流过程,但对洪峰的模拟精度较低;TRMM月降水数据精度较高,相关系数为0.96,能够较为精确地模拟黄泥庄站的月径流过程。  相似文献   

乌兰哈达变质岩地层地热勘探井钻头选择与取心工艺          下载免费PDF全文

宋国龙  董劲松  李进安 《探矿工程》2016,43(12):41-44

内蒙古自治区察右后旗乌兰哈达苏木地热勘探井井深2006.87 m。采用石油30型钻机施工,钻遇地层大部分为变质岩,达1500 m以上,对牙轮钻头损坏严重,同时施工要求进行18次岩心采取。经过对钻头的试用、选择,最后选用HJ637G型牙轮钻头,钻进时效可达0.8～1.2 m,使用寿命可达到80～100 h。取心段采用川7-4型双管单动取心筒配合金刚石钻头,岩心采取率可达70%～95%。  相似文献   

Molybdenum Mass Fractions and Isotopic Compositions of International Geological Reference Materials          下载免费PDF全文

Pei‐Pei Zhao  Jie Li  Le Zhang  Zhi‐Bing Wang  De‐Xin Kong  Jin‐Long Ma  Gang‐Jian Wei  Ji‐Feng Xu 《Geostandards and Geoanalytical Research》2016,40(2):217-226

The double‐spike method with multi‐collector inductively coupled plasma‐mass spectrometry was used to measure the Mo mass fractions and isotopic compositions of a set of geological reference materials including the mineral molybdenite, seawater, coral, as well as igneous and sedimentary rocks. The long‐term reproducibility of the Mo isotopic measurements, based on two‐year analyses of NIST SRM 3134 reference solutions and seawater samples, was ≤ 0.07‰ (two standard deviations, 2s, n = 167) for δ^98/95Mo. Accuracy was evaluated by analyses of Atlantic seawater, which yielded a mean δ^98/95Mo of 2.03 ± 0.06‰ (2s, n = 30, relative to NIST SRM 3134 = 0‰) and mass fraction of 0.0104 ± 0.0006 μg g^?1 (2s, n = 30), which is indistinguishable from seawater samples taken world‐wide and measured in other laboratories. The comprehensive data set presented in this study serves as a reference for quality assurance and interlaboratory comparison of high‐precision Mo mass fractions and isotopic compositions.  相似文献   

High Precision Sr‐Nd‐Hf‐Pb Isotopic Compositions of USGS Reference Material BCR‐2          下载免费PDF全文

Jason Jweda  Louise Bolge  Cornelia Class  Steven L. Goldstein 《Geostandards and Geoanalytical Research》2016,40(1):101-115

The Lamont‐Doherty Earth Observatory radiogenic isotope group has been systematically measuring Sr‐Nd‐Pb‐Hf isotopes of USGS reference material BCR‐2 (Columbia River Basalt 2), as a chemical processing and instrumental quality control monitor for isotopic measurements. BCR‐2 is now a widely used geochemical inter‐laboratory reference material (RM), with its predecessor BCR‐1 no longer available. Recognising that precise and accurate data on RMs is important for ensuring analytical quality and for comparing data between different laboratories, we present a compilation of multiple digestions and analyses made on BCR‐2 during the first author's dissertation research. The best estimates of Sr, Nd and Hf isotope ratios and measurement reproducibilities, after filtering at the 2s level for outliers, were ⁸⁷Sr/⁸⁶Sr = 0.705000 ± 11 (2s, 16 ppm, n = 21, sixteen digestions, one outlier), ¹⁴³Nd/¹⁴⁴Nd = 0.512637 ± 13 (2s, 25 ppm, n = 27, thirteen digestions, one outlier) and ¹⁷⁶Hf/¹⁷⁷Hf = 0.282866 ± 11 (2s, 39 ppm, n = 25, thirteen digestions, no outliers). Mean Nd and Hf values were within error of those reported by Weis et al. (2006, 2007) in their studies of RMs; mean Sr values were just outside the 2s uncertainty range of both laboratories. Moreover, a survey of published Sr‐Nd‐Hf data shows that our results fall within the range of reported values, but with a smaller variability. Our Pb isotope results on acid leached BCR‐2 aliquots (n = 26, twelve digestions, two outliers) were ²⁰⁶Pb/²⁰⁴Pb = 18.8029 ± 10 (2s, 55 ppm), ²⁰⁷Pb/²⁰⁴Pb = 15.6239 ± 8 (2s, 52 ppm), ²⁰⁸Pb/²⁰⁴Pb = 38.8287 ± 25 (2s, 63 ppm). We confirm that unleached BCR‐2 powder is contaminated with Pb, and that sufficient leaching prior to digestion is required to achieve accurate values for the uncontaminated Pb isotopic compositions.  相似文献   

An Alternative Protocol for Single Zircon Dissolution with Application to (U‐Th‐Sm)/He Thermochronometry          下载免费PDF全文

Bouchaïb Tibari  Arnaud Vacherat  Martin Stab  Raphaël Pik  Delphine Yeghicheyan  Pascal Hild 《Geostandards and Geoanalytical Research》2016,40(3):365-375

Zircon (U‐Th‐Sm)/He (ZHe) thermochronometry is a powerful tool that has been widely used in geology to constrain the exhumation histories of orogens. In this study, we present an alternative protocol for dissolving zircon grains for determination of parent nuclides. This new alkali fusion procedure developed at the SARM (Service d'Analyse des Roches et des Minéraux) in Nancy, France, is fast (requiring only 2 d, including cleaning steps) and offers several advantages over conventional methods by avoiding: (i) use of HF pressure dissolution and (ii) complete removing of grains from the metal microvials. After dissolution, U, Th and Sm were measured using an ICP‐MS. We tested the new procedure on two different ZHe reference materials, the Fish Canyon Tuff and Buluk Tuff; these provided precision values for ZHe‐age estimations of 9 and 6% (1s), respectively. In addition, using this method, zircons from the Buluk Tuff are shown to be chemically more homogenous and more suitable for assessing the uncertainty of the entire integrated procedure.  相似文献   

Community‐Derived Standards for LA‐ICP‐MS U‐(Th‐)Pb Geochronology – Uncertainty Propagation,Age Interpretation and Data Reporting          下载免费PDF全文

Matthew S. A. Horstwood  George Gehrels  Simon E. Jackson  Noah M. McLean  Chad Paton  Norman J. Pearson  Keith Sircombe  Paul Sylvester  Pieter Vermeesch  James F. Bowring  Daniel J. Condon  Blair Schoene 《Geostandards and Geoanalytical Research》2016,40(3):311-332

The LA‐ICP‐MS U‐(Th‐)Pb geochronology international community has defined new standards for the determination of U‐(Th‐)Pb ages. A new workflow defines the appropriate propagation of uncertainties for these data, identifying random and systematic components. Only data with uncertainties relating to random error should be used in weighted mean calculations of population ages; uncertainty components for systematic errors are propagated after this stage, preventing their erroneous reduction. Following this improved uncertainty propagation protocol, data can be compared at different uncertainty levels to better resolve age differences. New reference values for commonly used zircon, monazite and titanite reference materials are defined (based on ID‐TIMS) after removing corrections for common lead and the effects of excess ²³⁰Th. These values more accurately reflect the material sampled during the determination of calibration factors by LA‐ICP‐MS analysis. Recommendations are made to graphically represent data only with uncertainty ellipses at 2s and to submit or cite validation data with sample data when submitting data for publication. New data‐reporting standards are defined to help improve the peer‐review process. With these improvements, LA‐ICP‐MS U‐(Th‐)Pb data can be considered more robust, accurate, better documented and quantified, directly contributing to their improved scientific interpretation.  相似文献   

An Investigation of Digestion Methods for Trace Elements in Bauxite and Their Determination in Ten Bauxite Reference Materials Using Inductively Coupled Plasma‐Mass Spectrometry          下载免费PDF全文

Wen Zhang  Liang Qi  Zhaochu Hu  Cunjiang Zheng  Yongsheng Liu  Haihong Chen  Shan Gao  Shenghong Hu 《Geostandards and Geoanalytical Research》2016,40(2):195-216

Trace elements from samples of bauxite deposits can provide useful information relevant to the exploration of the ore‐forming process. Sample digestion is a fundamental and critical stage in the process of geochemical analysis, which enables the acquisition of accurate trace element data by ICP‐MS. However, the conventional bomb digestion method with HF/HNO₃ results in a significant loss of rare earth elements (REEs) due to the formation of insoluble AlF₃ precipitates during the digestion of bauxite samples. In this study, the digestion capability of the following methods was investigated: (a) ‘Mg‐addition’ bomb digestion, (b) NH₄HF₂ open vessel digestion and (c) NH₄F open vessel digestion. ‘Mg‐addition’ bomb digestion can effectively suppress the formation of AlF₃ and simultaneously ensure the complete decomposition of resistant minerals in bauxite samples. The addition of MgO to the bauxite samples resulted in (Mg + Ca)/Al ratios ≥ 1. However, adding a large amount of MgO leads to significant blank contamination for some transition elements (V, Cr, Ni and Zn). The NH₄HF₂ or NH₄F open vessel digestion methods can also completely digest resistant minerals in bauxite samples in a short period of time (5 hr). Unlike conventional bomb digestion with HF/HNO₃, the white precipitates and the semi‐transparent gels present in the NH₄HF₂ and NH₄F digestion methods could be efficiently dissolved by evaporation with HClO₄. Based on these three optimised digestion methods, thirty‐seven trace elements including REEs in ten bauxite reference materials (RMs) were determined by ICP‐MS. The data obtained showed excellent inter‐method reproducibility (agreement within 5% for REEs). The relative standard deviation (% RSD) for most elements was < 6%. The concentrations of trace elements in the ten bauxite RMs showed agreement with the limited certified (Li, V, Cr, Cu, Zn, Ga, Sr, Zr and Pb) and information values (Co, Ba, Ce and Hf) available. New trace element data for the ten RMs are provided, some of which for the first time.  相似文献   

Production and Certification of Synthetic Selenium Isotopic Reference Materials          下载免费PDF全文

Tongxiang Ren  Jun Wang  Hai Lu  Tao Zhou  Yuanjing Zhou 《Geostandards and Geoanalytical Research》2016,40(2):227-238

Due to intensive research into selenium isotopes in recent years, the increasing requirement for reliable and comparable measurement results has created a strong demand for selenium isotopic certified reference materials (iCRM) that were previously not available. To address this, eleven selenium iCRMs were developed, including ten synthetic iCRMs (GBW 04447–GBW 04456) and one natural iCRM (GBW 04457). The synthetic iCRMs were prepared with ⁷⁶Se, ⁷⁸Se, ⁸⁰Se and ⁸²Se solutions and a natural selenium solution; the natural iCRM was prepared with highly pure selenium material. The property values of isotope ratios in these iCRMs were certified by calibrated mass spectrometry with a collision cell multi‐collector ICP‐MS. The mass discrimination effect of the instrument was corrected with corresponding ⁷⁸Se/⁷⁶Se isotope mixtures and ⁸²Se/⁷⁶Se isotope mixtures, which were gravimetrically prepared with purified, isotopically enriched selenium materials. Homogeneity and stability tests were performed, and no significant influences were found. The uncertainty of the property values of the iCRMs was evaluated according to the Guide to the Expression of Uncertainty in Measurement (GUM) of ISO/BIPM and ISO Guide 35. The δ^82/76Se value of GBW 04457 relative to NIST SRM 3149 was also calculated. These iCRMs are intended for use in calibration of instruments and evaluation of methods for the determination of selenium isotope ratios.  相似文献