Depths of Partial Crystallization of H2O-bearing MORB: Phase Equilibria Simulations of Basalts at the MAR near Ascension Island (7 11{degrees}S)     

Almeev  Renat; Holtz  Francois; Koepke  Jurgen; Haase  Karsten; Devey  Colin 《Journal of Petrology》2008,49(1):25-45

Phase equilibria simulations were performed on naturally quenchedbasaltic glasses to determine crystallization conditions priorto eruption of magmas at the Mid-Atlantic Ridge (MAR) east ofAscension Island (7–11°S). The results indicate thatmid-ocean ridge basalt (MORB) magmas beneath different segmentsof the MAR have crystallized over a wide range of pressures(100–900 MPa). However, each segment seems to have a specificcrystallization history. Nearly isobaric crystallization conditions(100–300 MPa) were obtained for the geochemically enrichedMORB magmas of the central segments, whereas normal (N)-MORBmagmas of the bounding segments are characterized by polybariccrystallization conditions (200–900 MPa). In addition,our results demonstrate close to anhydrous crystallization conditionsof N-MORBs, whereas geochemically enriched MORBs were successfullymodeled in the presence of 0·4–1 wt% H₂O in theparental melts. These estimates are in agreement with direct(Fourier transform IR) measurements of H₂O abundances in basalticglasses and melt inclusions for selected samples. Water contentsdetermined in the parental melts are in the range 0·04–0·09and 0·30–0·55 wt% H₂O for depleted and enrichedMORBs, respectively. Our results are in general agreement (within±200 MPa) with previous approaches used to evaluate pressureestimates in MORB. However, the determination of pre-eruptiveconditions of MORBs, including temperature and water contentin addition to pressure, requires the improvement of magma crystallizationmodels to simulate liquid lines of descent in the presence ofsmall amounts of water. KEY WORDS: MORB; Mid-Atlantic Ridge; depth of crystallization; water abundances; phase equilibria calculations; cotectic crystallization; pressure estimates; polybaric fractionation  相似文献   

Pressures of Crystallization of Icelandic Magmas   总被引：1，自引：0，他引：1  

Kelley  Daniel F.; Barton  Michael 《Journal of Petrology》2008,49(3):465-492

Iceland lies astride the Mid-Atlantic Ridge and was createdby seafloor spreading that began about 55 Ma. The crust is anomalouslythick (20–40 km), indicating higher melt productivityin the underlying mantle compared with normal ridge segmentsas a result of the presence of a mantle plume or upwelling centeredbeneath the northwestern edge of the Vatnajökull ice sheet.Seismic and volcanic activity is concentrated in 50 km wideneovolcanic or rift zones, which mark the subaerial Mid-AtlanticRidge, and in three flank zones. Geodetic and geophysical studiesprovide evidence for magma chambers located over a range ofdepths (1·5–21 km) in the crust, with shallow magmachambers beneath some volcanic centers (Katla, Grimsvötn,Eyjafjallajökull), and both shallow and deep chambers beneathothers (e.g. Krafla and Askja). We have compiled analyses ofbasalt glass with geochemical characteristics indicating crystallizationof ol–plag–cpx from 28 volcanic centers in the Western,Northern and Eastern rift zones as well as from the SouthernFlank Zone. Pressures of crystallization were calculated forthese glasses, and confirm that Icelandic magmas crystallizeover a wide range of pressures (0·001 to 1 GPa), equivalentto depths of 0–35 km. This range partly reflects crystallizationof melts en route to the surface, probably in dikes and conduits,after they leave intracrustal chambers. We find no evidencefor a shallow chamber beneath Katla, which probably indicatesthat the shallow chamber identified in other studies containssilica-rich magma rather than basalt. There is reasonably goodcorrelation between the depths of deep chambers (> 17 km)and geophysical estimates of Moho depth, indicating that magmaponds at the crust–mantle boundary. Shallow chambers (<7·1 km) are located in the upper crust, and probablyform at a level of neutral buoyancy. There are also discretechambers at intermediate depths (11 km beneath the rift zones),and there is strong evidence for cooling and crystallizing magmabodies or pockets throughout the middle and lower crust thatmight resemble a crystal mush. The results suggest that themiddle and lower crust is relatively hot and porous. It is suggestedthat crustal accretion occurs over a range of depths similarto those in recent models for accretionary processes at mid-oceanridges. The presence of multiple stacked chambers and hot, porouscrust suggests that magma evolution is complex and involvespolybaric crystallization, magma mixing, and assimilation. KEY WORDS: Iceland rift zones; cotectic crystallization; pressure; depth; magma chamber; volcanic glass  相似文献   

Global Correlations of Ocean Ridge Basalt Chemistry with Axial Depth: a New Perspective   总被引：4，自引：0，他引：4  

Niu  Yaoling; O'Hara  Michael J. 《Journal of Petrology》2008,49(4):633-664

The petrological parameters Na₈ and Fe₈, which are Na₂O andFeO contents in mid-ocean ridge basalt (MORB) melts correctedfor fractionation effects to MgO = 8 wt%, have been widely usedas indicators of the extent and pressure of mantle melting beneathocean ridges. We find that these parameters are unreliable.Fe₈ is used to compute the mantle solidus depth (P_o) and temperature(T_o), and it is the values and range of Fe₈ that have led tothe notion that mantle potential temperature variation of T_P= 250 K is required to explain the global ocean ridge systematics.This interpreted T_P = 250 K range applies to ocean ridges awayfrom ‘hotspots’. We find no convincing evidencethat calculated values for P_o, T_o, and T_P using Fe₈ have anysignificance. We correct for fractionation effect to Mg^# = 0·72,which reveals mostly signals of mantle processes because meltswith Mg^# = 0·72 are in equilibrium with mantle olivineof Fo_89·6 (vs evolved olivine of Fo_{88·1–79·6}in equilibrium with melts of Fe₈). To reveal first-order MORBchemical systematics as a function of ridge axial depth, weaverage out possible effects of spreading rate variation, local-scalemantle source heterogeneity, melting region geometry variation,and dynamic topography on regional and segment scales by usingactual sample depths, regardless of geographical location, withineach of 22 ridge depth intervals of 250 m on a global scale.These depth-interval averages give Fe₇₂ = 7·5–8·5,which would give T_P = 41 K (vs 250 K based on Fe₈) beneathglobal ocean ridges. The lack of Fe₇₂–Si₇₂ and Si₇₂–ridgedepth correlations provides no evidence that MORB melts preservepressure signatures as a function of ridge axial depth. We thusfind no convincing evidence for T_P > 50 K beneath globalocean ridges. The averages have also revealed significantcorrelations of MORB chemistry (e.g. Ti₇₂, Al₇₂, Fe₇₂,Mg₇₂, Ca₇₂, Na₇₂ and Ca₇₂/Al₇₂) with ridge axial depth. Thechemistry–depth correlation points to an intrinsic linkbetween the two. That is, the 5 km global ridge axial reliefand MORB chemistry both result from a common cause: subsolidusmantle compositional variation (vs T_P), which determines themineralogy, lithology and density variations that (1) isostaticallycompensate the 5 km ocean ridge relief and (2) determine thefirst-order MORB compositional variation on a global scale.A progressively more enriched (or less depleted) fertileperidotite source (i.e. high Al₂O₃ and Na₂O, and low CaO/Al₂O₃)beneath deep ridges ensures a greater amount of modal garnet(high Al₂O₃) and higher jadeite/diopside ratios in clinopyroxene(high Na₂O and Al₂O₃, and lower CaO), making a denser mantle,and thus deeper ridges. The dense fertile mantle beneath deepridges retards the rate and restricts the amplitude of the upwelling,reduces the rate and extent of decompression melting, givesway to conductive cooling to a deep level, forces melting tostop at such a deep level, leads to a short melting column,and thus produces less melt and probably a thin magmatic crustrelative to the less dense (more refractory) fertile mantlebeneath shallow ridges. Compositions of primitive MORB meltsresult from the combination of two different, but geneticallyrelated processes: (1) mantle source inheritance and (2) meltingprocess enhancement. The subsolidus mantle compositional variationneeded to explain MORB chemistry and ridge axial depth variationrequires a deep isostatic compensation depth, probably in thetransition zone. Therefore, although ocean ridges are of shalloworigin, their working is largely controlled by deep processesas well as the effect of plate spreading rate variation at shallowlevels. KEY WORDS: mid-ocean ridges; mantle melting; magma differentiation; petrogenesis; MORB chemistry variation; ridge depth variation; global correlations; mantle compositional variation; mantle source density variation; mantle potential temperature variation; isostatic compensation  相似文献   

A neutron diffraction study of alkali cation migration in montmorillonites     

D. Gournis  A. Lappas  M. A. Karakassides  D. Többens  A. Moukarika 《Physics and Chemistry of Minerals》2008,35(1):49-58

Neutron powder diffraction measurements on lithium and cesium saturated montmorillonite samples before and after heat treatment at 300°C are studied, in order to undertake a complete refinement of crystal structure and unravel the migration mechanism for the interlayer cations of Li or Cs. Rietveld analysis of the corresponding diffraction patterns finds that montmorillonite crystallizes in the C2/m space group with unit cell dimensions consistent with the size of the specific interlayer cation. We show that thermal treatment affects the two types of samples in a different way. This is with respect to their unit cell dimensions and the migration of Li from the 2b to the 2c clay lattice site, in constrast to the Cs positioning which remains effectively unchanged.  相似文献   

流域水文模型参数识别的现代优化方法研究进展   总被引：1，自引：1，他引：0  

武震  张世强  张小文 《冰川冻土》2008,30(1):64-71

水文参数优化是水文模型发展中的一个重要部分,针对水循环过程模拟中的流域水文模型参数识别的复杂优化问题,回顾了水文模型优化算法的发展历程,对国内外水文模型参数识别算法的最新进展进行了阐述.介绍了模拟退火算法、遗传算法、SCE-UA、粒子群算法等常用算法的参数设定及一般流程,并对编码遗传算法、单纯形混合加速遗传算法和运用融合技术的几种遗传算法以及其它几种常用算法在新安江模型中的优化结果进行了比较,认为混合加速遗传算法是一种较好的方法.在系统研究现代优化算法与传统优化算法的基础上,建立各种优化算法的融合技术和法则可能是进一步提高参数优化算法性能的方向.  相似文献   

Spatial Variability of Rock Depth in Bangalore Using Geostatistical, Neural Network and Support Vector Machine Models     

T. G. Sitharam  Pijush Samui  P. Anbazhagan 《Geotechnical and Geological Engineering》2008,26(5):503-517

Geospatial technology is increasing in demand for many applications in geosciences. Spatial variability of the bed/hard rock is vital for many applications in geotechnical and earthquake engineering problems such as design of deep foundations, site amplification, ground response studies, liquefaction, microzonation etc. In this paper, reduced level of rock at Bangalore, India is arrived from the 652 boreholes data in the area covering 220 km². In the context of prediction of reduced level of rock in the subsurface of Bangalore and to study the spatial variability of the rock depth, Geostatistical model based on Ordinary Kriging technique, Artificial Neural Network (ANN) and Support Vector Machine (SVM) models have been developed. In Ordinary Kriging, the knowledge of the semi-variogram of the reduced level of rock from 652 points in Bangalore is used to predict the reduced level of rock at any point in the subsurface of the Bangalore, where field measurements are not available. A new type of cross-validation analysis developed proves the robustness of the Ordinary Kriging model. ANN model based on multi layer perceptrons (MLPs) that are trained with Levenberg–Marquardt backpropagation algorithm has been adopted to train the model with 90% of the data available. The SVM is a novel type of learning machine based on statistical learning theory, uses regression technique by introducing loss function has been used to predict the reduced level of rock from a large set of data. In this study, a comparative study of three numerical models to predict reduced level of rock has been presented and discussed.  相似文献   

三肇凹陷青山口组源岩生成油向下“倒灌”运移层位及其研究意义   总被引：14，自引：1，他引：13  

付广  王有功 《沉积学报》2008,26(2):355-360

为了研究三肇凹陷青山口组源岩生成的油向下“倒灌”运移层位,对油向下“倒灌”运移机制及条件进行了研究,得到三肇凹陷扶杨油层同时具备①青山口组源岩目前应具有足够大的超压;②存在连通青山口组源岩和扶杨油层的T2断裂2个条件,青山口组源岩生成的油能够在超压的作用下在嫩江组沉积末期、明水组沉积末期和古近系沉积末期通过T2断裂向下伏扶杨油层中“倒灌”运移。利用压力封闭原理,对三肇凹陷青山口组源岩生成的油向下“倒灌”运移距离进行了研究,得到三肇凹陷青山口组源岩生成的油向下“倒灌”运移距离一般大于500 m,而三肇凹陷扶杨油层地层厚度最大只有500 m,表明三肇凹陷青山口组源岩生成的油可以向下“倒灌”运移至整个扶杨油层的任何部位。目前三肇凹陷扶杨油层从上至下均含油,且已找到的油藏均分布于青山口组源岩生成的油能够向下“倒灌”运移分布范围内或附近,这表明青山口组源岩生成的油向下“倒灌”运移层位控制着油气富集层位,青山口组源岩生成的油向下“倒灌”运移分布范围控制着三肇凹陷扶杨油层油藏形成与分布范围。青山口组源岩生成的油向下“倒灌”运移分布范围及其附近应是三肇凹陷扶杨油层油下一步勘探的有利地区。  相似文献   

基于AGA的SVM需水预测模型研究   总被引：1，自引：0，他引：1  

张灵  陈晓宏  刘丙军  王兆礼 《水文》2008,28(1):38-42,46

需水预测是一个由城市人口、工业水平、社会经济水平共同作用的多因素、多层次的复杂非线性系统.其结果将直接影响受区域水资源承载力约束的产业结构、布局形态等决策.作为一种集中参数预报方法,支持向量机方法具有对未来样本的较好的泛化性能,对于这类资料缺乏、系统结构尚欠清晰的问题可以取得较好的模拟和预测结果.基于此,本文将支持向量机方法引入需水预测领域,建立了需水预测支持向量机模型.同时,本文将加速遗传算法和支持向量机方法耦合起来,构造了支持向量机模型参数的自适应优化算法.模型在珠海市的应用实例表明:与简单遗传算法比较,AGA的模型参数寻优效率更高;与BP神经网络模型相比,SVM模型较好地解决了小样本、经验性等问题,并取得了较高的预测精度.  相似文献   

Transplantation-tagging-experiments in preliminary studies of migration of cod off Norway   总被引：1，自引：2，他引：1  

Godo  Olav Rune 《ICES Journal of Marine Science》1995,52(6):955-962

  相似文献   

多传感器观测下带乘性噪声系统的逆向滤波与反褶积融合算法     

褚东升  李玉全  梁猛  张玲 《中国海洋大学学报(自然科学版)》2002,32(5):837-842

针对多传感器观测环境下带乘性噪声系统的逆向最优滤波与反褶积融合估计问题 ,本文提出了 1种基于极大似然准则的最优融合算法。该算法中各单传感器间并行计算 ,并且融合中心与单传感器处理中心间无反向通讯 ,因而执行效率较高。仿真表明 ,该融合算法产生的逆向滤波与反褶积比单传感器处理结果有较明显提高  相似文献