柔性承台板与群桩的竖向动力作用     

燕彬  黄义 《地震工程与工程振动》2004,24(5):136-140

采用动力文克尔地基模型模拟均质粘弹性土层,推导出了均质土中单桩动阻抗;引用桩-桩动力相互作用因子,得到了刚性承台下群桩的动阻抗;而且建立了柔性承台与桩基础的竖向振动模型,该模型考虑了筏板自身的变形,并导出了其共同作用的运动方程。最后对柔性承台与刚性承台的计算结果作了对比分析。  相似文献   

强夯法施工振动效应分析     

何少林  李佐唐 《地震地磁观测与研究》2004,25(4):67-73

对强夯法施工引起的振动效应进行了详细分析,得出对邻近建筑物影响因素的估计,为强夯施工方案设计提供设计借鉴。  相似文献   

中卫活动断裂带地震破裂危险区演化特征模拟   总被引：2，自引：0，他引：2  

王爱国  杨斌  马巍  张向红 《高原地震》2004,16(1):9-17

通过建立的岩石破裂危险度KR及断层滑动危险系数KF2个判别指标,对中卫一同心活动断裂带进行粘弹性有限元数值模拟,得到该断裂带在现代构造应力场作用下大震后的应力演变及地震破裂危险区长度、范围、峰值、衰减规律等的演化特征。结果表明,该断裂带大震后应力场的调整主要产生于震后300～400年间,震后地震破裂危险区转移到断裂带的中西段,并逐渐向东迁移,范围越来越集中,最终转移到断裂带的弧形顶点部位(红谷梁附近)。  相似文献   

Liquefaction mitigation in silty soils using composite stone columns and dynamic compaction   总被引：2，自引：1，他引：1  

T.Shenthan R.Nashed S.Thevanayagam G.R.Martin 《地震工程与工程振动(英文版)》2004,3(1):39-50

The objective of this study is to develop an analytical methodology to evaluate the effectiveness ofvibro stone column (S. C.) and dynamic compaction (D.C.) techniques supplemented with wick drains to densify and mitigate liquethctionin saturated sands and non-plastic silty soils. It includes the following: (i) develop numerical models to simulate and analyze soil densification during S.C. installation and D.C. process, and (ii) identify parameters controlling post-improvement soil density in both cases, and (iii) develop design guidelines for densification of silty soils using the above techniques. An analytical procedure was developed and used to simulate soil response during S.C. and D.C. installations, and the results were compared with available case history data. Important construction design parameters and soil properties that affect the effectiveness of these techniques, and construction design choices suitable for sands and non-plastic silty soils were identified. The methodology is expected to advance the use of S.C. and DC. in silty soils reducing the reliance on expensive field trials as a design tool. The ultimate outcome of this research will be design charts and design guidelines for using composite stone columns and composite dynamic compaction techniques in liquefaction mitigation of saturated silty soils.  相似文献   

A simplified methd of evaluating the seismic performance of buildings     

AshutoshBagchi 《地震工程与工程振动(英文版)》2004,3(2):223-236

This paper presents a simplified method of evaluating the seismic performance of buildings. The proposed method is based on the transformation of a multiple degree of freedom (MDOF) system to an equivalent single degree of freedom (SDOF) system using a simple and intuitive process. The proposed method is intended for evaluating the seismic performance of the buildings at the intermediate stages in design, while a rigorous method would be applied to the final design. The performance of the method is evaluated using a series of buildings which are assumed to be located in Victoria in western Canada, and designed based on the upcoming version of the National Building Code of Canada which is due to be published in 2005. To resist lateral loads, some of these buildings contain reinforced concrete moment resisting frames,while others contain reinforced concrete shear walls. Each building model has been subjected to a set of site-specific seismic spectrum compatible ground motion records, and the response has been determined using the proposed method and the general method for MDOF systems. The results from the study indicate that the proposed method can serve as a useful tool for evaluation of seismic performance of buildings, and carrying out performance based design.  相似文献   

Impact of Ocean Mean Dynamic Topography on Satellite Data Assimilation     

F. BIROL  J. M. BRANKART  F. CASTRUCCIO  P. BRASSEUR  J. VERRON 《Marine Geodesy》2013,36(1-2):59-78

The response of an eddy-permitting ocean model to changes imposed by the use of different mean dynamic topographies (MDT) is analyzed in a multivariate assimilation context, allowing the evaluation of this impact, not only on the surface circulation, but also on the interior ocean representation. The assimilation scheme is a reduced-order sequential Kalman filter (SEEK). In a first set of experiments, high resolution sea surface temperature, along-track sea surface height and sea surface salinity from climatology are assimilated into a 1/3° resolution North and Tropical Atlantic version of the HYCOM model. In a second experiment, in situ profile data are assimilated in addition to the surface measurements.

The first set of experiments illustrates that important differences in the representation of the horizontal model circulation pattern are related to differences in the MDT used. The objective of assimilation is to improve the representation of the 3D ocean state. However, the imperfect representation of the mean dynamic topography appears to be an important limiting factor with regard to the degree of realism obtained in the simulated flow.

Vertical temperature and salinity profiles are key observations to drive a general circulation ocean model toward a more realistic state. The second set of experiments shows that assimilating them in addition to sea surface measurements is a far from trivial exercise. A specific difficulty is due to inconsistencies between the dynamic topography diagnosed from in situ observations and that diagnosed from sea surface height. These two fields obtained from different data sources do not contain exactly the same information. In order to overcome this difficulty, a strategy is proposed and validated.  相似文献   

Improving the Coastal Mean Dynamic Topography by Geodetic Combination of Tide Gauge and Satellite Altimetry     

Ole Baltazar Andersen  Karina Nielsen  Per Knudsen  Chris W. Hughes  Rory Bingham  Luciana Fenoglio-Marc 《Marine Geodesy》2013,36(6):517-545

Abstract

The ocean mean dynamic topography (MDT) is the surface representation of the ocean circulation. The MDT may be determined by the ocean approach, which involves temporal averaging of numerical ocean circulation model information, or by the geodetic approach, wherein the MDT is derived using the ellipsoidal height of the mean sea surface (MSS), or mean sea level (MSL) minus the geoid as the geoid. The ellipsoidal height of the MSS might be estimated either by satellite or coastal tide gauges by connecting the tide gauge datum to the Earth-centred reference frame. In this article we present a novel approach to improve the coastal MDT, where the solution is based on both satellite altimetry and tide gauge data using new set of 302 tide gauges with ellipsoidal heights through the SONEL network. The approach was evaluated for the Northeast Atlantic coast where a dense network of GNSS-surveyed tide gauges is available. The typical misfit between tide gauge and satellite or oceanographic MDT was found to be around 9?cm. This misfit was found to be mainly due to small scale geoid errors. Similarly, we found, that a single tide gauge places only weak constraints on the coastal dynamic topography.  相似文献   

测量船动态吃水测量方法研究     

吴炳昭  黄谟涛  陆秀平  黄贤源 《海洋测绘》2013,33(4):16-18

针对测量船特别是中大型测量船的动态吃水问题,提出了单船和双船载波相位差分GPS测定方法,给出了动态吃水计算公式。根据装备现状,对比分析了三种测量方法的适用范围,例举了典型参数值的动态吃水观测误差,旨在为测量作业人员提供借鉴和参考。  相似文献   

畸形波作用下四立柱张力腿平台动力响应研究     

谷家扬  吕海宁  杨建民 《海洋工程》2013,31(5):25-36

介绍了畸形波生成的方法并对各种线性合成畸形波的效率进行了对比。选用改进的随机波加瞬态波的方法模拟强非线性波———"新年波"的波形。采用微元法对张力腿平台的立柱和浮筒进行离散,编制程序对张力腿平台在强非线性波作用下的耦合动力响应进行了数值模拟,重点比较分析了张力腿平台在随机波及畸形波中所受波浪力、平台动力响应、系泊系统张力特性及浪向角对平台运动的影响。研究表明:在"新年波"作用下,0°浪向时,平台在x和z方向所受波浪力较随机波增长了约1/4,纵荡、垂荡及纵摇响应值分别增加了33%,38%和12%,张力腿张力幅值增加约20%,位于平台四角的张力腿张力有所差异,相邻两根张力腿的张力差别不大,浪向角对平台运动响应、张力腿张力的影响畸形波大于随机波的作用。为今后考虑强非线性波浪影响时张力腿平台的设计提供了借鉴和参考。  相似文献   

沙箱对桩腿耦合装置的影响研究     

刘丽红  刘锦昆  蒋习民  王德禹 《海洋工程》2013,31(5):18-24

桩腿耦合装置(简称LMU)在平台浮托安装过程中上部组块插尖与导管架桩管对接期间起缓冲作用,是海上浮装的最重要装置之一。运用非线性有限元软件ABAQUS,对相同尺寸、受相同垂向载荷作用的有沙箱和无沙箱的LMU分别进行了显式准静态和动态数值模拟,并将计算结果进行对比,以考察沙箱对LMU力学特性的影响。结果表明,与无沙箱的LMU相比,有沙箱的LMU能够承受较大的外载荷作用,可提升外套筒钢材的使用效率,较迅速地降低载荷转移作业过程中整个平台的运动速度,提高平台浮托安装过程中能量吸收速率,并且能减小LMU在动态过程中的最大应力。  相似文献