Adhesion of foulings on surface energy of silicone rubber coatings     

Tian Jun  Xue Qunji 《海洋学报(英文版)》1999,18(1):97-102

INTRODUCTIONBiologicalfoulingonthehullsofshipsandothersubmergedmarinestructurescausesgreatha~s.Inadditiontodecreasingship'sspeed,andincreasingitsfuelconsumption,biologicalfoulingalsoincreasestheweightofnavigationalbuoys,interfereswithoperatingequipmentandsounddevices,clogsseawaterpipingsystems,adverselyaffectsheat-exchangerperformance,andpromotescorrosionofmetalsurface(HuangandCat,1984).UPtothepresent,antifoulingpaintshaveachievedtheireffectivenessbyreleasingattheirsurfacebiocides,allcom…  相似文献   

Reduction of pounding effects in elevated bridges during earthquakes     

Robert Jankowski  Krzysztof Wilde  Yozo Fujino 《地震工程与结构动力学》2000,29(2):195-212

Pounding of adjacent superstructure segments in elevated bridges during severe earthquakes can result in significant structural damage. The aim of this paper is to analyse several methods of reduction of the negative effects of collisions induced by the seismic wave propagation effect. The analysis is conducted on a detailed three‐dimensional structural component model of an isolated highway bridge. The results show that the influence of pounding on the structural response is significant in the longitudinal direction of the bridge and significantly depends on the gap size between superstructure segments. The smallest response can be obtained for very small gap sizes and for gap sizes large enough to prevent pounding. Further analysis indicates that the bridge behaviour can be effectively improved by placing hard rubber bumpers between segments and by stiff linking the segments one with another. The experimental results show that, for the practical application of such connectors, shock transmission units can be used. Copyright © 2000 John Wiley & Sons, Ltd.  相似文献   

Experimental study of deformable connection consisting of buckling‐restrained brace and rubber bearings to connect floor system to lateral force resisting system          下载免费PDF全文

Georgios Tsampras  Richard Sause  Robert B. Fleischman  Jose I. Restrepo 《地震工程与结构动力学》2017,46(8):1287-1305

This paper presents experimental and numerical studies of a full‐scale deformable connection used to connect the floor system of the flexible gravity load resisting system to the stiff lateral force resisting system (LFRS) of an earthquake‐resistant building. The purpose of the deformable connection is to limit the earthquake‐induced horizontal inertia force transferred from the floor system to the LFRS and, thereby, to reduce the horizontal floor accelerations and the forces in the LFRS. The deformable connection that was studied consists of a buckling‐restrained brace (BRB) and steel‐reinforced laminated low‐damping rubber bearings (RB). The test results show that the force–deformation responses of the connection are stable, and the dynamic force responses are larger than the quasi‐static force responses. The BRB+RB force–deformation response depends mainly on the BRB response. A detailed discussion of the BRB experimental force–deformation response is presented. The experimental results show that the maximum plastic deformation range controls the isotropic hardening of the BRB. The hardened BRB force–deformation responses are used to calculate the overstrength adjustment factors. Details and limitations of a validated, accurate model for the connection force–deformation response are presented. Numerical simulation results for a 12‐story reinforced concrete wall building with deformable connections show the effects of including the RB in the deformable connection and the effect of modeling the BRB isotropic hardening on the building seismic response. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

Stress softening behaviour of HDNR bearings: modelling and influence on the seismic response of isolated structures          下载免费PDF全文

Enrico Tubaldi  Laura Ragni  Andrea Dall'Asta  Hamid Ahmadi  Alan Muhr 《地震工程与结构动力学》2017,46(12):2033-2054

  相似文献   

基于FEA的填充墙与隔震器协同抗震系统性能分析          下载免费PDF全文

李然 《地震工程学报》2018,40(5):891-896

隔震器与填充墙对建筑抗震性能有很大作用。为了探究填充墙布置形式及填充材料和隔震器协同作用对钢筋混凝土框架结构动力特性及抗震性能的影响,采用等效斜撑理论,对3种不同填充墙布置形式与隔震器协同作用的抗震系统方案进行对比分析,研究发现顶层不布置填充墙与隔震器协同抗震系统钢筋混凝土框架结构的抗震性能最佳。在此系统上分析了不同填充材料对钢筋混凝土框架结构抗震性能的影响,结果表明,加气混凝土砌块填充墙的钢筋混凝土框架结构抗震性能最好。  相似文献   

Response of hybrid isolation system during a shake table experiment of a full‐scale isolated building          下载免费PDF全文

Keri L. Ryan  Taichiro Okazaki  Camila B. Coria  Eiji Sato  Tomohiro Sasaki 《地震工程与结构动力学》2018,47(11):2214-2232

A full‐scale 5‐story steel moment frame building was subjected to a series of earthquake excitations using the E‐Defense shake table in August, 2011. For one of the test configurations, the building was seismically isolated by a hybrid system of lead‐rubber bearings and low friction roller bearings known as cross‐linear bearings, and was designed for a very rare 100 000‐year return period earthquake at a Central and Eastern US soil site. The building was subject to 15 trials including sinusoidal input, recorded motions and simulated earthquakes, 2D and 3D input, and a range of intensities including some beyond the design basis level. The experimental program was one of the first system‐level full‐scale validations of seismic isolation and the first known full‐scale experiment of a hybrid isolation system incorporating lead‐rubber and low friction bearings. Stable response of the hybrid isolation system was demonstrated at displacement demands up to 550 mm and shear strain in excess of 200%. Torsional amplifications were within the new factor stipulated by the code provisions. Axial force was observed to transfer from the lead‐rubber bearings to the cross‐linear bearings at large displacements, and the force transfer at large displacements exceeded that predicted by basic calculations. The force transfer occurred primarily because of the flexural rigidity of the base diaphragm and the larger vertical stiffness of the cross‐linear bearings relative to the lead‐rubber bearings.  相似文献   

考虑尺寸效应的近海桥梁天然橡胶隔震支座力学性能老化时变规律研究          下载免费PDF全文

李艳敏  马玉宏  赵桂峰 《世界地震工程》2020,(4):169-177

目前天然橡胶支座（NRB）的性能研究大多未考虑尺寸效应,在前期开展的近海桥梁隔震支座和材料老化时变规律研究的基础上,同时考虑支座直径尺寸变化和老化作用时间的影响对NRB的性能进行研究。首先采用ABAQUS有限元软件对不同直径尺寸NRB的性能进行分析,得到了NRB性能随直径尺寸的变化规律;然后结合前期老化作用对NRB及其橡胶材料性能时变规律的影响研究成果,分析了直径尺寸及老化作用时间共同作用下,NRB性能的变化规律,并通过ABAQUS有限元分析,验证了该变化规律的准确性。结果表明:NRB的水平刚度和竖向刚度均随其直径尺寸的增大呈正比例增大趋势;NRB水平刚度比和竖向刚度比均随老化作用时间的增长呈线性增大趋势;且直径为150mm的NRB在实际环境老化60a后,其水平刚度和竖向刚度的增长幅度分别为:30.8%和16.41%,由此可见老化作用时间对NRB水平刚度的影响较显著,对其竖向刚度的影响较小。研究内容可为隔震桥梁结构中支座缩尺模型试验的相关设计提供参考,并为将实验室缩尺橡胶隔震支座的相关成果较好地应用于实际工程计算及设计中提供依据。  相似文献   

橡胶砂垫层在不同类别场地上的减震效应研究     

刘方成  姚玉文  吴孟桃  王菁菁 《地震工程与工程振动》2019,39(1):128-137

橡胶砂(RSM)垫层减震是一种适用于低层房屋的低成本减震方法,关于场地类别对其减震效应影响的研究尚未开展。采用简化的层间剪切模型模拟减震垫层-上部结构动力相互作用体系,建立了RSM垫层"减震地基"分析模型。针对30%配比的橡胶砂,考虑3种垫层厚度200 mm/300 mm/500 mm、4种基底压力50 kPa～300 kPa,基于对取自于不同场地类别的195条地震波的刚性地基反应谱和RSM垫层"减震地基"反应谱的分析对比,得到以下结论:(1)RSM垫层的减震效应受场地类别的影响,场地卓越周期越短,减震效应越好;(2)RSM垫层厚度越大,减震效应越好,但当垫层厚度达到500 mm时,减震性能鲁棒性变差,且这种鲁棒性的劣化与场地类别无关;(3)各种场地类别地震波作用下,RSM垫层减震效应均随输入地震加速度和基底应力的增大而增加,但随着前者的增加,后者的影响减小。  相似文献   

Finite‐element analysis of laminated rubber bearing of building frame under seismic excitation          下载免费PDF全文

Makoto Ohsaki  Tomoshi Miyamura  Masayuki Kohiyama  Takuzo Yamashita  Masashi Yamamoto  Naohiro Nakamura 《地震工程与结构动力学》2015,44(11):1881-1898

Finite element analysis is carried out for a building frame supported by laminated rubber bearings to simultaneously investigate global displacement and local stress responses under seismic excitation. The frame members and the rubber bearings are discretized into hexahedral solid elements with more than 3 million degrees of freedom. The material property of rubber is represented by the Ogden model, and the frame is assumed to remain in elastic range. It is shown that the time histories of non‐uniform stress distribution and rocking behavior of the rubber bearings under a frame subjected to seismic excitation can be successfully evaluated, and detailed responses of base and frame can be evaluated through large‐scale finite element analysis. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

块状地质体的多面体表示及交互编辑   总被引：2，自引：0，他引：2  

陈少强  李琦 《地球学报》2005,26(2):191-194

针对固体矿产的地质建模问题,中国科技工作者提出了用于人机交互构造块状地质模型的“橡皮膜技术”并在此基础上完成了人机交互计算机辅助勘查系统PandaCAEX。“橡皮膜技术”可以快速地构造出任意形状的块状地质模型,为地质模型的构造提供了极大的方便。但“橡皮膜技术”本身存在着模型表达过于复杂和一些功能上的缺陷。本文针对这些问题提出直接使用多面体模型对块状地质体进行表达,同时给出了模型的交互编辑方法。与“橡皮膜技术”相比,这种技术在保留“橡皮膜技术”优点的同时,使块状地质模型的表达大大简化、功能更加完善。该模型已经成为新的改进系统的核心,证明了模型的实用性。  相似文献