巴丹吉林沙漠北缘拐子湖流沙下垫面近地层湍流强度和陆面过程特征     

郑新倩  杨帆  李超凡  潘红林  吉春容  买买提艾力&#  买买提依明  霍文  杨兴华  周成龙 《中国沙漠》2019,39(4):103-112

利用巴丹吉林沙漠北缘拐子湖流沙下垫面2013年7、10月和2014年1、4月的湍流通量资料，计算并分析了研究区近地层湍流强度，同时针对风速分量、温度、水汽和CO₂归一化标准差随稳定度的变化关系和总体输送系数等陆面过程特征进行分析。结果表明：（1）风速各分量的湍流强度均随风速的增加逐渐减小，风速处于2 m·s^-1以下时湍流发展最为旺盛。湍流强度主要由水平方向风速分量决定，垂直方向风速的作用较小，且近中性和不稳定层结利于湍流的发展。与其他地区相比，平坦且没有建筑物的沙漠地区，机械湍流较弱，湍流强度相应较小。（2）风速各分量的归一化标准差与稳定度（z/L）均满足1/3次方函数规律，其中垂直方向风速分量的拟合曲线方程较好。（3）动量输送系数C_d具有明显的夏季高、冬季低的变化状态且各月的日变化形态均呈夜间低、日间高的循环形态。热量输送系数C_h的不同月份日变化间并没有明显的排列次序，且日出日落前后具有明显的波动。不稳定层结时，C_d和C_h均随风速的增加逐渐减小；稳定层结时，C_d和C_h均随着风速的增加逐渐上升。  相似文献   

Inverse modelling using PS‐InSAR data for improved land subsidence simulation in Las Vegas Valley,Nevada          下载免费PDF全文

Meijing Zhang  Thomas J. Burbey 《水文研究》2016,30(24):4494-4516

Las Vegas Valley has had a long history of groundwater development and subsequent surface deformation. InSAR interferograms have revealed detailed and complex spatial patterns of subsidence in the Las Vegas Valley area that do not coincide with major pumping regions. This research represents the first effort to use high spatial and temporal resolution subsidence observations from InSAR and hydraulic head data to inversely calibrate transmissivities (T), elastic and inelastic skeletal storage coefficients (S_ke and S_kv) of the developed‐zone aquifer and conductance (CR) of the basin‐fill faults for the entire Las Vegas basin. The results indicate that the subsidence observations from InSAR are extremely beneficial for accurately quantifying hydraulic parameters, and the model calibration results are far more accurate than when using only groundwater levels as observations, and just a limited number of subsidence observations. The discrepancy between distributions of pumping and greatest levels of subsidence is found to be attributed to spatial variations in clay thickness. The Eglington fault separates thicker interbeds to the northwest from thinner interbeds to the southeast and the fault may act as a groundwater‐flow barrier and/or subsidence boundary, although the influence of the groundwater barrier to this area is found to be insignificant. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

南海北部海域油气勘探保障建设选址适宜性研究     

武二亮  陈浩东  刘裕光  安永宁 《海岸工程》2020,39(4):256-262

为分析南海北部海域油气勘探保障建设选址的适宜性,在广泛研究备选区特征资料的基础上,基于层次分析法(Analytic Hierarchy Process, AHP)原理,以自然环境因素、开发环境因素、基础设施与投资情况以及其他因素作为一级评判准则,建立了包括12项二级评判准则的递进层次结构模型,并以永兴岛、赵述岛和晋卿岛作为3个假定备选区,来验证分析评价模型的有效性和可靠性。AHP评判结果显示,3个备选区的整体优劣指数依次为0.587 1, 0.212 1, 0.200 8;AHP模型的一致性比例CR值为0.020 3。通过分析和筛选影响远海油气勘探保障建设的选址因子,构建基于AHP原理的选址评价模型,可用于分析评价南海北部岛礁油气勘探保障建设选址的适宜性。  相似文献   

Generation of continuous surface soil moisture dataset using combined optical and thermal infrared images          下载免费PDF全文

Pei Leng  Xiaoning Song  Si‐Bo Duan  Zhao‐Liang Li 《水文研究》2017,31(6):1398-1407

Surface soil moisture (SSM) is a critical variable for understanding water and energy flux between the atmosphere and the Earth's surface. An easy to apply algorithm for deriving SSM time series that primarily uses temporal parameters derived from simulated and in situ datasets has recently been reported. This algorithm must be assessed for different biophysical and atmospheric conditions by using actual geostationary satellite images. In this study, two currently available coarse‐scale SSM datasets (microwave and reanalysis product) and aggregated in situ SSM measurements were implemented to calibrate the time‐invariable coefficients of the SSM retrieval algorithm for conditions in which conventional observations are rare. These coefficients were subsequently used to obtain SSM time series directly from Meteosat Second Generation (MSG) images over the study area of a well‐organized soil moisture network named REMEDHUS in Spain. The results show a high degree of consistency between the estimated and actual SSM time series values when using the three SSM dataset‐calibrated time‐invariable coefficients to retrieve SSM, with coefficients of determination (R²) varying from 0.304 to 0.534 and root mean square errors ranging from 0.020 m³/m³ to 0.029 m³/m³. Further evaluation with different land use types results in acceptable debiased root mean square errors between 0.021 m³/m³ and 0.048 m³/m³ when comparing the estimated MSG pixel‐scale SSM with in situ measurements. These results indicate that the investigated method is practical for deriving time‐invariable coefficients when using publicly accessed coarse‐scale SSM datasets, which is beneficial for generating continuous SSM dataset at the MSG pixel scale.  相似文献   

Analytical method of radiation by a wave energy device with dual rectangular floating bodies     

WANG Wensheng  YOU Yage  ZHANG Yunqiu  WU Bijun  YE Yin 《海洋学报(英文版)》2010,29(3):106-115

The system with one floating rectangular body on the free surface and one submerged rectangular body has been applied to a wave energy conversion device in water of finite depth. The radiation problem by this device on a plane incident wave is solved by the use of an eigenfunction expansion method, and a new analytical expression for the radiation velocity potential is obtained. The wave excitation force is calculated via the known incident wave potential and the radiation potential with a theorem of Haskind employed. To verify the correctness of this method, an example is computed respectively through the bound element method and analytical method. Results show that two numerical methods. are in good agreement, which shows that the present method is applicable. In addition, the trends of hydrodynamic coefficients and wave force are analyzed under different conditions by use of the present analytical method.  相似文献   

Site characterization model using least‐square support vector machine and relevance vector machine based on corrected SPT data (Nc)     

Pijush Samui  T. G. Sitharam 《国际地质力学数值与分析法杂志》2010,34(7):755-770

Statistical learning algorithms provide a viable framework for geotechnical engineering modeling. This paper describes two statistical learning algorithms applied for site characterization modeling based on standard penetration test (SPT) data. More than 2700 field SPT values (N) have been collected from 766 boreholes spread over an area of 220 sqkm area in Bangalore. To get N corrected value (N_c), N values have been corrected (N_c) for different parameters such as overburden stress, size of borehole, type of sampler, length of connecting rod, etc. In three‐dimensional site characterization model, the function N_c=N_c (X, Y, Z), where X, Y and Z are the coordinates of a point corresponding to N_c value, is to be approximated in which N_c value at any half‐space point in Bangalore can be determined. The first algorithm uses least‐square support vector machine (LSSVM), which is related to a ridge regression type of support vector machine. The second algorithm uses relevance vector machine (RVM), which combines the strengths of kernel‐based methods and Bayesian theory to establish the relationships between a set of input vectors and a desired output. The paper also presents the comparative study between the developed LSSVM and RVM model for site characterization. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

Effects of surface flux parameterization on the numerically simulated intensity and structure of Typhoon Morakot (2009)     

Jie Ming  Jun A. Zhang 《大气科学进展》2016,33(1):58-72

The effects of surface flux parameterizations on tropical cyclone(TC) intensity and structure are investigated using the Advanced Research Weather Research and Forecasting(WRF-ARW) modeling system with high-resolution simulations of Typhoon Morakot(2009).Numerical experiments are designed to simulate Typhoon Morakot(2009) with different formulations of surface exchange coefficients for enthalpy(C_K) and momentum(C_D) transfers,including those from recent observational studies based on in situ aircraft data collected in Atlantic hurricanes.The results show that the simulated intensity and structure are sensitive to C_K and C_D,but the simulated track is not.Consistent with previous studies,the simulated storm intensity is found to be more sensitive to the ratio of C_K/C_D than to C_K or C_D alone.The pressure-wind relationship is also found to be influenced by the exchange coefficients,consistent with recent numerical studies.This paper emphasizes the importance of C_D and C_K on TC structure simulations.The results suggest that C_D and C_K have a large impact on surface wind and flux distributions,boundary layer heights,the warm core,and precipitation.Compared to available observations,the experiment with observed C_D and C_K generally simulated better intensity and structure than the other experiments,especially over the ocean.The reasons for the structural differences among the experiments with different C_D and C_K setups are discussed in the context of TC dynamics and thermodynamics.  相似文献   

地基探测与NCEP GFS模式预报云量在ARM SGP站点对比     

张金强 《气象与环境科学》2016,39(1):12-18

使用大气辐射测量实验(Atmospheric Radiation Measurements:ARM)在美国南部大平原站点(Southern Great Plains:SGP)长时间序列(2001 2010年)的地基主动遥感云(Active Remote Sensing of Clouds:ARSCL)和美国国家环境预报中心(National Centers for Environmental Prediction:NCEP)全球预报系统(Global Forecast System:GFS)模式预报资料,对比分析了两者云量在不同时间尺度内(年际、月份和季节)的差异。结果表明,GFS模式预报总云量为83.8%,略高于地基观测结果(78.1%);两者总云量差异在秋季最大(8.8%),春季最小(2.2%)。在低垂直高度分辨率(≥3 km)时,地基探测低云、中云和高云的云量分别为46.1%、43.5%和61.2%;模式预报三类云的云量均要高于地基探测的云量,差异分别为9.6%、17.2%和9.1%。但是,在高垂直分辨率(250 m)时,地基探测云量在大多数高度层上要高于模式预报结果。这应该是两种资料廓线中有云出现的高度层数目存在差异引起的。地基观测和GFS模式预报同时表明,SGP站点上空云量垂直廓线呈现双峰结构,在边界层附近(1 km)和上对流层区域(8-12 km)云量较大,2-3 km高度范围内云量较小。在春夏秋冬四个季节内,两种资料在低层边界层附近的最大云量偏差分别为9.5%、8.8%、7.8%和11.2%。  相似文献   

Effect of sensor modelling methods on computation of 3-D coordinates from Cartosat-1 stereo data     

Mritunjay Kumar Singh  R.D. Gupta  Snehmani  Anshuman Bhardwaj  Ashwagosha Ganju 《国际地球制图》2016,31(5):506-526

The orbital and the rational polynomial coefficients (RPC) models are the two most commonly used models to compute a three-dimensional coordinates from an image stereo-pair. But it is still confusing that with the identical user provided inputs, which one of these two models provides more accurate digital elevation model (DEM), especially for mountainous terrain. This study aimed to find out the answer by evaluating the impact of used models on the vertical accuracy of DEM extracted from Cartosat-1 stereo data. We used high-accuracy photogrammetric DEM as the reference DEM. Apart from general variations in statistics, surprisingly in a few instances, both the DEMs provided contrasting results, thus proving the significance of this study. The computed root mean square errors and linear error at 90% (LE90) were lower in case of RPC DEM for various classes of slope, aspect and land cover, thus suggesting its better relative accuracy.  相似文献   

不同地形条件地面同步光谱定标场对比研究     

王瑞军  祝亚荔  李名松  孙永彬  张春雷  李婧玥 《矿产与地质》2016,(4):662-668

利用美国ASD公司的FieldSpec Pro FR地面波谱仪,选择5°视场角探头和135cm探头距测试地物高度,开展0°、5°、10°、15°、20°等五种不同地形坡度明、暗地物自然定标场地面波谱测试。通过对比研究不同地形坡度具代表性、能真实反映被测试目标平均自然性的各波谱测试点波谱曲线特征,得出0°、5°地形坡度获取的波谱曲线连续、平滑,信噪比高,没有混入大气水气吸收、仪器噪声等因素导致的剧烈波动、跳跃现象或尖锐锯齿状噪声,波谱特征明显,吸收峰最小值位置清晰可辨,各波谱测试点波谱曲线变化幅度小,整体反射率值变化小,Fe~(2+)、Fe~(3+)、Al-OH、Mg-OH、CO_3~(2-)等分子基团与离子波谱的诊断性波谱特征位置清晰可辨。因此0°和5°坡度地形条件获取的地面同步自然场光谱定标波谱曲线,可以满足航空高光谱遥感数据的大气校正、光谱重建和空、地回归分析等所需的地面波谱数据要求。  相似文献