暖切变型江淮梅雨锋结构及其形成和维持机制   总被引：26，自引：6，他引：20  

胡伯威  彭广 《大气科学》1996,20(4):463-472

对在1991年7月上旬特别稳定的梅雨形势下持续10天的特大暴雨期作了合成和典型过程研究,并进一步探讨了暖切变型江淮梅雨锋天气系统模型。它在自由大气层表现为结构竖立的相当正压切变线和一种不同于经典地转动量近似的带状准二维运动场。边界层的浅层锋生倾斜环流以及偏于切变线轴以南的Ekman抽吸与自由大气层中基本上由积云对流加热驱动的竖直环流相互依存和耦合,造成持续的大暴雨。这种系统的初生和中断后复苏的机制可能是由斜压性极弱的副热带高空东移的短波扰动在低层“湿度锋”带紧南侧触发导致的一种带状CISK。  相似文献   

The emplacement of intermediate volume ignimbrites: A case study from Roccamonfina Volcano,Southern Italy     

P. D. Cole  J. E. Guest  A. M. Duncan 《Bulletin of Volcanology》1993,55(7):467-480

A model is presented for the emplacement of intermediate volume ignimbrites based on a study of two 6 km³ volume ignimbrites on Roccamonfina Volcano, Italy. The model considers that the flows were slow moving, and quickly deflated from turbulent to non-turbulent conditions. Yield strength and density increased whereas fluidisation decreased with time and runout of the pyroclastic flows. In proximal locations, on the caldera rim, heterogeneous exposures including discontinuous lithic breccias, stratified and cross-stratified units interbedded with massive ignimbrite suggest deposition from turbulent flows. In medial locations thick, massive ignimbrite occurs associated with three types of co-ignimbrite lithic breccia which we interpret as being emplaced by non-turbulent flows. Multiple grading of different breccia/lithic concentration types within single flow units indicates that internal shear occurred producing overriding or overlapping of the rear of the flow onto the slower-moving front part. This overriding of different parts of non-turbulent pyroclastic flows could be caused by at least two different mechanisms: (1) changes in flow regime, such as hydraulic jumps that may occur at breaks in slope; and (2) periods of increased discharge rate, possibly associated with caldera collapse, producing fresh pulses of lithic-rich material that sheared onto the slower-moving part of the flow in front.We propose that ground surge deposits enriched in pumice compared with their associated ignimbrite probably formed by a flow separation mechanism from the top and front of the pyroclastic flow. These turbulent clouds moved ahead of the non-turbulent lower part of the flow to form stratified pumice-rich deposits. In distal regions well-developed coarse, often clast-supported, pumice concentrations zones and coarse intra-flow-unit lithic concentrations occur within the massive ignimbrite. We suggest that the flows were non-turbulent, possessed a relatively high yield strength and may have moved by plug flow prior to emplacement.  相似文献   

Large-scale rheomorphic shear deformation in Miocene peralkaline ignimbrite E,Gran Canaria     

Philip T Leat  Hans-Ulrich Schmincke 《Bulletin of Volcanology》1993,55(3):155-165

the single ignimbrite cooling unit E (average thickness, 28 m; volume, ca. 30 km₃) forms the uppermost member of the Miocene Upper Mogán Formation on Gran Canaria. It is strongly chemically zoned from basal, first-erupted comendite (peralkaline rhyolite) to late-erupted trachyte, and, apart from an upper trachytic zone, it is densely welded. E was emplaced onto a surface inclined ca. 2–5° from the source caldera. Detailed mapping of key sections, up to 300 m long, exposed in barranco walls, ca. 10 km from the caldera margin, reveals structures that are interpreted to have been produced by rheomorphic deformation of the ignimbrite along shear zones. The shear zones formed within the lower-viscosity comenditic tuff. Extensional structures include mega-boudinage and decapitated sequences and compression resulted in sequence repitition by overthrusting. Mechanisms traditionally thought to be important during rheomorphic deformation of welded tuffs (compaction, lateral creep, folding, vertical density-driven diapirism) cannot account for these features, which reflect lateral (post-compactional) rheomorphic movement locally in excess of 800 m. We suggest the following sequence of events: emplacement of the several flow units; compaction, with little lateral movement; rheomorphic deformation. During and after compaction, layers of secondary porosity developed within the comenditic tuff, possibly where upward escape of gas was prevented by overlying, relatively impermeable layers of densely compacted ignimbrite. These structurally weak layers of high porosity subsequently acted as shear zones.  相似文献   

Long-term prediction of intermediate depth earthquakes in the southern Aegean region based on a time-predictable model   总被引：1，自引：0，他引：1  

B. C. Papazachos 《Natural Hazards》1993,7(3):211-218

Repeat times of strong intermediate depth (60 km h 180 km) earthquakes have been determined by the use of instrumental and historical data for six seismogenic sources in the Benioff zone of the southern Aegean area. For four of these sources, at least two interevent times (three mainshocks) are available for each source. By using the repeat times for these four sources, the following relation has been determined: logT _t = 0.20M _min + 0.19M _p +a, whereT _t is the repeat time (in years),M _min the surface wave magnitude of the smallest earthquake considered,M _p the magnitude of the preceding mainshock and a parameter which varies from source to source. A multilinear correlation coefficient equal to 0.91 was determined for this relation, which indicates that the time predictable model holds to a satisfactory degree for the strong mainshocks of intermediate focal depth in the southern Aegean.By assuming that the ratioT/T _t, whereT is the observed andT _t the calculated repeat time, follows a lognormal distribution, the conditional probabilities for the occurrence of strong (M _s 6.5) and very strong (M _s 7.5) earthquakes during the period 1991–2001 in these four seismogenic sources have been calculated. These probabilities are very high (P > 0.9) for the strong and high (P > 0.5) for the very strong intermediate depth earthquakes which occur in the three sources of the shallower (h < 100 km) part of the Benioff zone where coupling occurs between the front parts of the Mediterranean lithosphere (downgoing) and the Aegean lithosphere.  相似文献   

Effects of ageing and overconsolidation on the elastic stiffness of a remoulded clay     

George A. Athanasopoulos 《Geotechnical and Geological Engineering》1993,11(1):51-65

Summary Results of resonant column tests were used to determine values of low amplitude shear modulus (G ₀) of a remoulded kaolinite clay for different durations of ageing and for different values of consolidation stress (₀) and overconsolidation ratio (OCR). It was found that after completion of primary consolidation the values of G ₀ increased linearly with the logarithm of time and after a week of confinement the value of normalized rate of secondary increase of shear modulus (N _G ) could be reliably estimated. Values of N _G were found to derease linearly with the logarithm of OCR and with the logarithm of ageing duration. This similarity of behaviour provided a basis for establishing an equivalency between age and equivalent overconsolidation ratio (OCR)_eq. The effects of ₀ and OCR on the value of G ₀ were also established in a functional form that indicated a stronger influence compared to that predicted by the Hardin Equation.  相似文献   

北京云蒙山地区花岗岩穹隆及伸展构造的探讨   总被引：9，自引：0，他引：9  

张建新  曾令森 《地质论评》1997,43(3):232-240

北京云蒙山花岗岩为一中生代侵入的花岗岩穹隆,花岗岩穹隆的叶理普遍发育,叶理轨迹基本平行于穹隆的外部边界,并显示出从核部到边部逐渐增强,东南侧明显强于西北侧的特点。变形构造研究显示,花岗岩穹隆的边部及围岩中普遍存在不同层次及不同运动方向的伸展构造。东南侧以具河防口－水峪伸展型韧性剪切带为特征,剪切运动标志显示为从ＮＷ－ＳＥ的正剪切运动,有限应变分析估算其剪切位移量在１０ｋｍ以上,剪切带上部被河防口正  相似文献   

A Step Towards Evaluation of the Seismic Response Reduction Factor in Multistorey Reinforced Concrete Frames   总被引：1，自引：0，他引：1  

Barakat  Samar a.  Husein Malkawi  Abdallah I.  Al-Shatnawi  Anis S. 《Natural Hazards》1997,16(1):65-80

A seismic nonlinear time-history analysis was made for four-, six-, and eight-storey reinforced concrete buildings. These buildings were made as three-dimensional space frame structures with shear walls in both orthogonal directions. They have five bays with 4.8 m spacing each in the horizontal direction, and three bays with 4.2 m spacing each in the transversal direction. The frames were designed according to the Jordanian Seismic Code of practice for Seismic Zones 4, 3, 2, and 1 as proposed for Jordan by several authors. Time-history analysis was made using the El Centro (N-S) earthquake record of May 1940 as an actual earthquake excitation. The response reduction factor (R) that primarily consists of two factors that are the ductility reduction (Rµ) and the overstrength (), is obtained. It has been seen that the seismic zoning has a slight effect on the ductility reduction factor for different buildings, since it ranges from Zone 4 to Zone 1 as 2.37 to 2.52, 1.72 to 1.78, and 1.14 to 1.18 for four-, six-, and eight-storey buildings, respectively. Moreover, it is observed that, for different buildings and different seismic zones, the ductility reduction factor (Rµ) is slightly different from the system ductility factor (µ) especially for higher values of µ (i.e., Rµ µ). The response reduction factor, called overstrength (), was evaluated. The overstrength factor was found to vary with seismic zones (Z) , number of stories, and design gravity loads. However, the dependency on seismic zones was the strongest. The average overstrength of these buildings in Zones 4 and 1 was 2.61 and 6.94, respectively. The overstrength increased as the number of storeys decreased: overstrength of a four-storey building was higher than an eight-storey building by 36% in Zone 4, and 39% in Zone 1. Furthermore, buildings of the three heights had an average overstrength 165.9% higher in Zone 1 than in Zone 4. These observations have a significant implications for the seismic design codes which currently do not take into account the variation of the response reduction factor, R (i.e., ductility reduction factor times overstrength).  相似文献   

Direct shear tests on Mexico City clay with reference to friction pile behaviour     

E. Ovando-Shelley 《Geotechnical and Geological Engineering》1995,13(1):1-16

Summary This paper presents results of static and cyclic direct shear tests performed on undisturbed and remoulded samples of Mexico City clays, including results of soil-on-interface tests. Experiments show that the static adhesion coefficient depends on the soils' liquidity index and that it diminishes due to the effect of repeated dynamic loads. Dynamic overstrength effects were not apparent, as has been observed when testing this clay in other apparatus. Interface strength in remoulded clays is initially less than half the strength of interfaces with undisturbed materials but it increases with time. At least in the materials tested in this research, it did not equal the strength of interfaces with undisturbed materials. Correction factors derived from experimental data can be used to modify the adhesion coefficient to account for dynamic and remoulding effects.  相似文献   

哀牢山-红河剪切带的热年代学研究——多重扩散域模式的应用实例   总被引：22，自引：3，他引：19       下载免费PDF全文

陈文寄 Harr.  M 《地震地质》1992,14(2):121-128

洛弗拉等人(1989)把Dodson(1973)建立的单一扩散域模式扩展成矿物扩散域不连续分布的模式,即多重扩散域模式,与之对应具有某一封闭温度范围,因此利用单个K-长石矿物样品可以揭示更长时间段上的冷却过程。对云南哀牢山-红河剪切带的K-长石样品(FA-2-1)进行40Ar/39Ar同位素分析,利用多重扩散域模式,揭示在距今约20～19Ma问该带存在一快速冷却过程,这与西藏南部曲水地区快速抬升的时间是一致的  相似文献   

短周期仪器记录在远震分析中的应用     

许康生 《地震地磁观测与研究》1992,13(2):15-19

地震泼由多种频率成份组成,在其传播过程中。由于地球介质的滤波作用,随着传播距离的增大。高频成份逐渐被衰减。周期越大的成份传播越远。因此,在地震观测上,不同频带的地震仪用于观测不同震中距范围的地震,使仪器较好地响应,就我国台网而言,短周期仪用于地方震、近震的监测,中长周期仪和长周期仪用于远震,极远震的监测,其中长周期仪偏重于记录极远震。但作者在实际分析工作中注意到,短周期仪的记录应用于远震,极远震的分析,显示出独特的作用,充分挖掘和利用短仪资料,将会更加丰富远震、极远震的震相资料。本文以高台地震台的资料为依据,从震中距和震级角度,与中长仪和长仪作比较,对短仪记录远震、极远震的震相及特征作了统计分析与初步探讨,并对新疆地区“影区”地震S波的记录、日本地区地震_PPcP等震相的出现提出了现象的存在,给出了相应的观测结果,以待步一步研究。  相似文献