Plastic buckling of ring-stiffened conical shells under external hydrostatic pressure     

Carl T.F. Ross  Andrew P.F. Little  Kehinde A. Adeniyi 《Ocean Engineering》2005,32(1):753-36

The paper describes experimental tests carried out on three ring-stiffened cones that were tested to destruction under external hydrostatic pressure. The cones were carefully machined from EN1A Steel. All three cones failed by plastic non-symmetric bifurcation buckling in a mode commonly known as general instability. In this mode the entire ring-shell combination buckles bodily.The paper also provides a design chart using the results obtained from these three vessels, together with the results of six other vessels obtained from other tests. The design chart allows the possibility of obtaining a plastic knock down factor, so that the theoretical buckling pressures, based on elastic theory, can be divided by the plastic knockdown factor, to give the predicted buckling pressure. This method can also be used for the design of full-scale vessels.  相似文献   

Stability of waterfront retaining wall subjected to pseudo-static earthquake forces     

Deepankar Choudhury  Syed Mohd. Ahmad 《Ocean Engineering》2007,34(14-15):1947-1954

Waterfront retaining walls supporting dry backfill are subjected to hydrostatic pressure on upstream face and earth pressure on the downstream face. Under seismic conditions, if such a wall retains a submerged backfill, additional hydrodynamic pressures are generated. This paper pertains to a study in which the effect of earthquakes along with the hydrodynamic pressure including inertial forces on such a retaining wall is observed. The hydrodynamic pressure is calculated using Westergaard's approach, while the earth pressure is calculated using Mononobe-Okabe's pseudo-static analysis. It is observed that when the horizontal seismic acceleration coefficient is increased from 0 to 0.2, there is a 57% decrease in the factor of safety of the retaining wall in sliding mode. For investigating the effect of different parameters, a parametric study is also done. It is observed that if φ is increased from 30° to 35°, there is an increase in the factor of safety in the sliding mode by 20.4%. Similar observations were made for other parameters as well. Comparison of results obtained from the present approach with [Ebeling, R.M., Morrison Jr, E.E., 1992. The seismic design of waterfront retaining structures. US Army Technical Report ITL-92-11. Washington DC] reveal that the factor of safety for static condition (k_h=0), calculated by both the approaches, is 1.60 while for an earthquake with k_h=0.2, they differ by 22.5% due to the consideration of wall inertia in the present study.  相似文献   

波浪作用下孔隙海床-管线动力相互作用分析   总被引：1，自引：0，他引：1  

栾茂田  曲鹏  郭莹  杨庆  范庆来 《海洋工程》2007,25(2):43-51

波浪作用下海床中的孔隙水压力与有效应力是影响海底管线稳定性的主要因素。然而,在目前的海床响应分析中一般将管线假定为刚性,并不能合理地考虑海床与管线之间的相互作用效应,同时也没有考虑土体和管线加速度对海床动力响应的惯性影响,从而无法确定由此所引起的管线内应力。为此考虑管线的柔性,分别采用饱和孔隙介质的Biot动力固结理论和弹性动力学理论列出了海床与管线的控制方程,进而采用摩擦接触理论考虑海床与管线之间的相互作用效应,基于有限元方法建立了海床-管线相互作用的计算模型及其数值算法。通过变动参数对比计算讨论了管线几何尺寸、海床土性参数对波浪所引起的管线周围海床孔隙水压力和管线内应力的影响。  相似文献   

威海地区高压岩石组合及其成因演化     

韩宗珠  王来明  张希道  毛振业 《中国海洋大学学报(自然科学版)》1993,(3)

利用矿物地质温压计估算变质高峰期温压条件、退变质作用温压条件。研究表明,本区为鲁苏构造带的北延部分,代表本区晚元古代华南陆块与华北陆块的碰撞及三叠纪华北陆块向华南陆块推覆事件的发生和演化。  相似文献   

The buckling of plastic oblate hemi-ellipsoidal dome shells under external hydrostatic pressure     

C. T. F. Ross  P. Youster  R. Sadler 《Ocean Engineering》2001,28(7):584

The paper presents a theoretical and an experimental investigation into the buckling of seven oblate hemi-ellipsoidal dome shells under external hydrostatic pressure. Four of the shells were made in glass reinforced plastic and three were made from a thermosetting plastic called solid urethane plastic. All the vessels were tested to destruction. The theoretical study was made with the aid of a non-linear finite element solution, where both geometrical and material non-linearity were allowed for. Good agreement was found between experiment and theory for all the vessels. The very oblate domes failed axisymmetrically. Theoretical convergence was good for the more oblate domes but it was not as good as for the less oblate domes. This may have been because the less oblate domes did not fail in a classical axisymmetric manner as was expected. This work is of much importance in ocean engineering.  相似文献   

胶南构造混杂岩带中糜棱岩的显微形变特征与古构造环境——来自榴辉岩围岩的构造信息     

赵广涛  张保民  韩宗珠 《中国海洋大学学报(自然科学版)》1992,(4)

以胶南构造混杂岩带中榴辉岩的围岩——套程度不同的糜棱岩化岩石为研究对象,重点研究了其显微形变的结构特征及环境意义、石英组构特征及动力学信息,并讨论其形成的古构造环境和构造机制。  相似文献   

长江口淡水端淡、盐水混合表层pCO2的急剧变化及其影响机制   总被引：4，自引：0，他引：4  

李岩  张龙军  苏征  王晓亮  潘建明 《中国海洋大学学报(自然科学版)》2006,36(2):295-298

根据2004年5月长江口淡水端淡、盐水混合初期表层水二氧化碳分压(pCO2)的实测数据,结合水文、化学和生物等要素的同步观测资料,对pCO2的变化及其影响因素进行了研究。研究结果表明:在长江口淡水端盐度0~15的淡、盐水混合初期,表层水pCO2由3 500μatm左右大幅度下降至约1 000μatm。生源要素的补充使生物活动的急剧增加是pCO2以对数形式大幅度降低的主要原因,这一性质显著体现的拐点为(S<0.6,50<浊度<110)这一范围。同时由于生物活动和物理混合作用的分别控制,使得长江口淡水端淡、盐水混合初期表层水碱度与盐度呈二次抛物线关系,拐点处的盐度约为0.6。  相似文献   

Analysis of seabed instability using element free Galerkin method     

J.G. Wang  M.R. Karim  P.Z. Lin 《Ocean Engineering》2007,34(2):247-260

Wave-induced seabed instability, either momentary liquefaction or shear failure, is an important topic in ocean and coastal engineering. Many factors, such as seabed properties and wave parameters, affect the seabed instability. A non-dimensional parameter is proposed in this paper to evaluate the occurrence of momentary liquefaction. This parameter includes the properties of the soil and the wave. The determination of the wave-induced liquefaction depth is also suggested based on this non-dimensional parameter. As an example, a two-dimensional seabed with finite thickness is numerically treated with the EFGM meshless method developed early for wave-induced seabed responses. Parametric study is carried out to investigate the effect of wavelength, compressibility of pore fluid, permeability and stiffness of porous media, and variable stiffness with depth on the seabed response with three criteria for liquefaction. It is found that this non-dimensional parameter is a good index for identifying the momentary liquefaction qualitatively, and the criterion of liquefaction with seepage force can be used to predict the deepest liquefaction depth.  相似文献   

Influence of large-diameter pipe pile driving on surrounding marine soils and adjacent submarine pipelines     

Jinzhong Dou  Zhong-Jie Zhang 《Marine Georesources & Geotechnology》2021,39(1):15-33

Abstract

With the large-scale development and utilization of ocean resources and space, it is inevitable to encounter existing submarine facilities in pile driving areas, which necessitates a safety assessment. In this article, by referring to a wharf renovation project as a reference, the surrounding soil response and buried pipe deformation during pile driving in a near-shore submarine environment are investigated by three-dimensional (3D) numerical models that consider the pore water effect. Numerical studies are carried out in two different series: one is a case of a single pile focusing on the effect of the minimum plane distance of the pile–pipe, and the other is a case of double piles focusing on the effect of the pile spacing.  相似文献   

Investigation of the hydrate reservoir production under different depressurization modes     

Zhizeng Xia  Xuewu Wang  Xiaohua Zhang 《Marine Georesources & Geotechnology》2020,38(8):1002-1012

Abstract

Large reserves of natural gas hydrates exist, and the depressurization method has the greatest potential for gas hydrate reservoir recovery. Currently, the most commonly adopted depressurization simulation method is a constant bottom-hole pressure production scheme. This study proposes a new depressurization mode with decreasing bottom-hole pressure. The production characteristic was numerically investigated using this method. The results show the following: (1) As the depressurization exponent (n) decreases, the development effect improves, and production indexes including cumulative gas production/dissociation and gas-water ratio increase. However, the reservoir energy consumption is higher and the hydrate reformation is more severe. (2) Compared to the proposed depressurization mode, the hydrate production index of the constant bottom-hole pressure production (n?=?0) is better. However, the hydrate reservoir energy consumption is higher and the hydrate reformation is more severe using constant bottom-hole pressure production. (3) To achieve a balance between production and reservoir energy consumption during depressurization production, the bottom-hole pressure should be controlled by selecting a suitable depressurization exponent between n_min and n_max, which can be determined through numerical simulations.  相似文献