Steady‐state analytical solutions of flow and deformation coupling due to a point sink within a finite fluid‐saturated poroelastic layer          下载免费PDF全文

P. Li  K. Wang  G. Fang  D. Lu 《国际地质力学数值与分析法杂志》2017,41(8):1093-1107

An exact steady‐state closed‐form solution is presented for coupled flow and deformation of an axisymmetric isotropic homogeneous fluid‐saturated poroelastic layer with a finite radius due to a point sink. The hydromechanical behavior of the poroelastic layer is governed by Biot's consolidation theory. Boundary conditions on the lateral surface are specifically chosen to match the appropriate finite Hankel transforms and simplify the transforms of the governing equations. Ordinary differential equations in the transformed domain are solved, and then the analytical solutions in the physical space for the pore pressure and the displacements are finally obtained by using finite Hankel inversions. The analytical solutions at some special locations such as the top and bottom surfaces, lateral surface, and the symmetrical axis are given and analyzed. And a case study for the consolidation of a water‐saturated soft clay layer due to pumping is conducted. The analytical solution is verified against the finite element solution. Meanwhile, an analysis of coupled hydromechanical behavior is carried out herein. The presented analytical solution is an exact solution to the practical poroelastic problem within an axisymmetric finite layer. It can provide us a better understanding of the poroelastic behavior of the finite layer due to fluid extraction. Besides, it can be applied to calibrate numerical schemes of axisymmetric poroelasticity within finite domains. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

电感耦合等离子体质谱法测定铅合金中的微量杂质元素镉和锡   总被引：1，自引：1，他引：0  

郝原芳  刘新  宋丽华  李丽君  徐英奎 《岩矿测试》2016,35(4):378-383

铅合金中的镉和锡由于含量较低,国家标准方法均为单一元素分析,步骤繁琐,检出限高,难以达到理想的检出要求。本文建立了应用电感耦合等离子体质谱法(ICP-MS)测定铅合金中微量级(μg/g级)杂质元素镉和锡的分析方法。采用单一的低浓度硝酸溶解铅合金,用低温慢溶的方式使样品溶解更加完全,减少了多离子对仪器的干扰;通过铅基体匹配和加入酒石酸保证了标准与样品介质的一致性,同时避免了锡的水解;以~(103)Rh作为内标元素,~(111)Cd和~(118)Sn作为测量同位素克服了质谱干扰。方法检出限为镉0.05 ng/g、锡0.04 ng/g,比国家标准方法的检出限(1~6μg/g)低,精密度小于4%。该方法试剂用量少,减少了处理样品的复杂性,实现了合金中微量级元素的准确测定。  相似文献   

利用LA-ICP-MS在16 μm和10 μm激光束斑条件下测定独居石U-Th-Pb年龄     

汪双双  韩延兵  李艳广  魏小燕  靳梦琪  程秀花 《岩矿测试》2016,35(4):349-357

我国锂钾主要矿产资源大多分布在西部偏远地区,其勘查找矿或综合利用迫切需要现场快速分析技术的支持。本文介绍了自行开发的便携式Li-K分析仪的主要性能及其在锂辉石中锂的分析应用。Li-K分析仪是一种基于大气压的液体阴极辉光放电光谱仪,以待测液体为放电阴极,实现样品中Li、K等元素的原子化和激发。该仪器以光纤传导CCD光谱仪作为检测器,其波长范围为345～1015 nm,分辨率3 nm;以Li 670.78 nm和K 769.90 nm分析谱线,在最佳仪器工作条件下测定Li、K的精密度（RSD,n=14）均低于2%,检出限为0.03 μg/mL,检测范围0.1～10 μg/mL。研究表明,不同酸度和酸的类型对谱线强度影响较大,且存在显著的样品基体效应,标准曲线法分析锂辉石中Li的结果偏差高达267%;而标准加入法可克服基体效应的影响,获得与ICP-OES一致性较好的分析结果,为现场开展固体样品中Li的测定奠定了基础。  相似文献   

An algebraic solution of maximum likelihood function in case of Gaussian mixture distribution     

J. L. Awange  B. Palancz  R. Lewis  T. Lovas  B. Heck  Y. Fukuda 《Australian Journal of Earth Sciences》2016,63(2):193-203

  相似文献   

鄂尔多斯盆地北部砂岩型铀矿铀矿物地质地球化学特征及其成因意义   总被引：3，自引：0，他引：3  

吴柏林  张婉莹  宋子升  寸小妮  孙莉  罗晶晶  李艳青  程相虎  孙斌 《地质学报》2016,90(12):3393-3407

鄂尔多斯盆地北部已发现系列砂岩型铀矿,由东往西依次有东胜铀矿、杭锦旗(纳岭沟)铀矿、大营铀矿等大型、特大型矿床,成为我国目前砂岩型铀矿发现规模最大、最具远景的地区。研究表明,它们具有相似的矿床地质特征和形成环境。在矿床成矿作用研究中,铀的存在形式及铀矿物特征对砂岩铀矿来说是一项重要的内容,其认识对铀的地浸开采可提供重要依据,也是了解砂岩型铀矿形成机制或矿床形成环境及成因的重要信息。本文主要从三个方面对鄂尔多斯盆地北部大营铀矿、纳岭沟铀矿等主要砂岩型铀矿中铀矿物地质地球化学特征和成因进行了研究和探讨。通过电子探针测试,高分辨率扫描电镜观察等手段,认为盆地北部铀矿的铀矿物类型主要为铀石,含少量的沥青铀矿、钛铀矿、水硅铀石、钍铀石等;铀矿物常与黄铁矿、有机质(煤屑)及方解石相伴生。采用逐级化学提取等方法定量地分析了铀矿物占矿石中铀配分的比例关系,认为其中铀矿物和吸附态约各占铀存在形式的50%。首次对砂岩型铀矿的铀矿物进行微区原位LA-ICP-MS稀土元素分析,认为ΣREE在铀矿物铀石中高度富集,是矿石中稀土元素的主要载体;稀土元素是铀矿石中可综合利用的有益组份,其标准化曲线表现为明显的右倾型,轻稀土富集,轻重稀土分馏强烈,δEu和δCe具较弱的负异常,说明总体上铀矿化形成于外生后成环境。从上述铀矿物特征,初步探讨了铀矿化形成的环境与成因,认为铀矿化形成经历了至少为低温流体作用的环境;铀矿化形成于浅部地壳即外生后成环境而与深源作用无关。  相似文献   

Optimal routing for waste collection: a case study in Singapore     

Weijian Xue 《International journal of geographical information science》2016,30(3):554-572

ABSTRACT

To collect and dispose growing amounts of municipal solid waste (MSW) changed to be a hot topic along with the rapid urbanization in past decades. Cities are more and more dependent on the incineration instead of landfilling due to the cost-efficiency and environmental concerns. Considering the limited number of incineration plants and complicated situation of transportation in both spatial and temporal dimensions in different cities, the optimal routing for waste collection turns to be meaningful research topic. In this research, the ant colony optimization (ACO)-based multi-objective routing model coupled with min-max model and Dijkstra’s algorithm is proposed to address the question of which route to take from these waste-generating points to the target incineration plant(s) considering travel time, accident probability (black spots), and population exposure, so as to support the routing decision-making. The model is successfully implemented in Singapore and the effectiveness of the model has also been justified. Besides, few limitations of this research have also been discussed, some of which would also be the future directions of our research, especially the design and integration of a web-based routing decision-making support system.  相似文献   

An Analytical Solution for Dynamic Response of the Plate with Different Impedances Subjected to Underwater Explosion     

陈莹玉  姚熊亮  肖巍 《海洋工程》2016,(3):329-342

In this paper, the transmitted part of the incident wave is considered to revise Taylor’s solution, which is used to extend its application for analytical models to predict the response of the plate with different material properties. The influence of the material properties and the boundary condition of the plate on fluid and structural dynamics is systematically investigated. The analytical results are compared with those of detailed dynamic FE simulations and the two are in good agreement. The results indicate that the analytical method is valid and suitable for the plates with different material properties subjected to underwater explosion. It is found that Taylor’s results of the plate with small impedance are invalid, which indicates a potential application field for the analytical method.  相似文献   

Effect of Groundwater Fluctuations on Pore Pressures and Earth Pressures on Coastal Excavation Retaining Walls     

Lisha Zhang  Kanghe Xie  Dazhong Huang 《Marine Georesources & Geotechnology》2016,34(8):770-781

Pore water and earth pressures acting on retaining structures are investigated using an efficient coastal double-layered excavation model to determine offshore excavation responses to groundwater fluctuations outside foundation pits. Total pore water pressure includes excess pore water pressure (due to groundwater fluctuations) and steady pore water pressure (due to steady seepage) determined using one-dimensional consolidation theory of double-layered soil and one-dimensional steady-state flow theory, respectively. Rankine's active and passive earth pressures are obtained from pore water pressure. This method is applicable to arbitrary groundwater fluctuation conditions. How physical parameters affect pore water pressure is numerically investigated using examples, demonstrating the method's practicality for calculating pore water and earth pressures.  相似文献   

Is Ziarat a Potential Site for Conventional or Unconventional Energy Resources?     

Sarfraz KHAN  Umair Bin NISAR  Khawar A. AHMED  Muhammad WASEEM  Waqas AHMED 《《地质学报》英文版》2018,92(4):1544-1557

A structural interpretation of the Ziarat block in the Balochistan region (a part of the Suleiman Fold and Thrust Belt) has been carried out using seismic and seismological data. Seismic data consists of nine 2.5D pre‐stack migrated seismic lines, whereas the seismological data covers the Fault Plane Solution and source parameters. Structural interpretation describes two broad fault sets of fore and back thrusts in the study area that have resulted in the development of pop‐up structures, accountable for the structural traps and seismicity pattern in terms of seismic hazard. Seismic interpretation includes time and depth contour maps of the Dungan Formation and Ranikot group, while seismological interpretation includes Fault Plane Solution, that is correlated with a geological and structural map of the area for the interpretation of the nature of the subsurface faults. Principal stresses are also estimated for the Ranikot group and Dungan Formation. In order to calculate anisotropic elastic properties, the parameters of the rock strength of the formations are first determined from seismic data, along with the dominant stresses (vertical, minimum horizontal, and maximum horizontal). The differential ratio of the maximum and minimum horizontal stresses is obtained to indicate optimal zones for hydraulic fracturing, and to assess the potential for geothermal energy reservoir prospect generation. The stress maps indicate high values towards the deeper part of the horizon, and low towards the shallower part, attributed to the lithological and structural variation in the area. Outcomes of structural interpretation indicate a good correlation of structure and tectonics from both seismological and seismic methods.  相似文献   

成层软土地基预固结处理后桩基水平承载力估算方法     

黄朝煊  袁文喜  胡国杰 《岩土力学》2021,(1):113-124,134

目前通过对软土地基预加固处理来提高桩基水平承载力已被工程界认可,但如何在工程前期设计过程中估算软土地基预处理后桩基水平承载力提高值仍是技术难点。基于此,参考Bowles[1]的地基土水平抗力计算式,同时考虑成层软土地基预排水固结处理影响,通过数学推导,推求出根据原状软土室内土工试验抗剪强度指标及预加固处理时间,估算软土地基预处理后桩基水平承载力提高值的实用计算方法。考虑桩侧土弹塑性屈服影响,推导出成层软土中水平受荷桩弹塑性解析解及塑性区深度的计算式,给出了桩顶水平位移、桩身最大弯矩的无量纲计算式及相关计算源代码。依托于浙江省某水闸桩基工程案例,根据提出的计算方法对桩基水平承载力、桩顶水平位移及桩身最大弯矩等性状进行预估计算,并与地基预处理前、后现场试桩检测值进行验证对比,认为桩基水平承载力、桩顶水平位移及桩身最大弯矩等预估计算成果与工程现场试桩的检测值较接近,对类似工程设计具有较好的参考价值。  相似文献