不同固有频率比条件下圆柱双自由度涡激振动特性的数值研究   总被引：1，自引：1，他引：0  

翟云贺  康庄  宋儒鑫  孙丽萍 《海洋工程》2018,36(4):50-59

采用RANS方法,结合SST k-ω湍流模型,对不同顺流向与横顺流向固有频率的比值(即固有频率比,fnx/fny)条件下低质量比圆柱体的双自由度涡激振动进行了二维数值模拟。圆柱体的质量比为2.6,雷诺数范围为2 500~18 750,相应的约化速度范围为2~15,包括了经典试验中出现的整个锁定范围。通过研究发现,固有频率比是影响振动特性的重要参数,随着固有频率比的增加,响应幅值逐渐降低且向更高的约化速度偏移;在低约化速度范围内,固有频率比对顺流向和横流向振动之间的相位差以及升力频率有较大影响,从而得到各种不同偏向的8字形轨迹;最后对不同固有频率比条件下的尾涡模式进行了讨论,给出了对应不同约化速度时的尾涡模式。  相似文献   

Parametric Vibration Analysis of Submerged Floating Tunnel Tension Legs     

SUN Sheng-nan  SU Zhi-bin  FENG Yun-fen  XU Xian-yi 《中国海洋工程》2020,(1):131-136

According to the characteristics of submerged floating tunnel anchored by tension legs,simplifying the tube as point mass and assuming that the tension leg is a nonlinear beam model hinged at both ends,the nonlinear vibration equation of the tension leg is derived.The equation is solved by the Galerkin method and Runge Kutta method.Subsequently,numerical analysis of typical submerged floating tunnel tension leg is carried out.It is shown that,the parametric vibration response of the submerged floating tunnel tension leg is related to the amplitude and frequency of the end excitation.Without considering axial resonance and transverse resonance,it is reasonable that higher order modes are abandoned and only the first three modes are considered.The axial resonance amplitude of the second or third order mode is equivalent to the first order mode axial resonance amplitude,which should not be ignored.  相似文献   

海底管线冲刷悬空及其抑制技术研究综述     

杨少鹏  拾兵 《海洋科学》2018,42(3):121-130

海底管线作为海洋工程的重要组成部分,其安全性受到广泛关注。本文简单回顾了国内外学者通过物理实验、理论分析与数值模拟等方法研究海底管线冲刷悬空及防护问题的成果,并对工程中应用较广泛的防护方法的优缺点进行了简单对比,为该领域的进一步研究提供参考。  相似文献   

Analysis of Safe Span Length and Fatigue Life of Submarine Pipelines     

HE Zhang-feng  WEI Yuan  LIU Shu-lin 《中国海洋工程》2020,(1):119-130

Owing to the complex environmental conditions, suspension could induce complicated forces on submarine pipelines and even cause vortex-induced vibration, resulting in fatigue damage of pipelines. Through aiming at the 28-inch submarine pipeline in the East China Sea, the pipeline was segmented according to the similarity, considering the factors of pipe assembly, typhoon, current, wave and seabed topography. The effects of span length on natural frequency in each section of submarine pipeline were analyzed by finite element model. The maximum safe span length allowed by each pipeline section was verified by fatigue cumulative damage theory, and the fatigue life of each pipeline section were predicted. The results showed that each order natural frequency of the pipeline decreased with the increase of span length. The calculated results of empirical formulas were much smaller than those of the FEM analysis. The increase of the gap between the suspended pipeline and the seabed was beneficial to enhance the fatigue life of the suspended pipeline.  相似文献   

Large Eddy Simulation on Interaction Between in-Line and Cross-Flow Oscillation of A Circular Cylinder     

黄智勇  Carl M.LARSEN 《中国海洋工程》2010,(4)

This paper discusses numerical results from three-dimensional large eddy simulations of an oscillating cylinder under prescribed movements in uniform flow. Six cases,namely pure in-line,pure cross-flow and two groups of 'Figure of Eight' oscillation patterns are under investigation at Reynolds number Re=24000. The 'Figure of Eight' pattern in each group is with identical shape but opposite orbital directions. The numerical results on hydrodynamic forces,higher order force components,and vortex shedding mode...  相似文献   

某双向混凝土立交桥顶推法施工控制测量     

马勇  李仲勤  梅泽 《测绘与空间地理信息》2016,(11):213-215

文中所选立交桥为双向三车道桥梁,单幅为3跨105 m的箱型连续梁,重量3 400 t,横跨铁路线。对于跨铁路的桥梁建设,顶推法施工可最大限度地减少对交通的影响。桥梁重量大,所须牵引力约280 t,施工过程中对桥墩及其他建筑物产生的变形较大,施工前模拟施工状态,设计控制测量监控的基本方案,利用控制测量方法,对施工状态实时监测,预测变形及偏位、纠偏,使施工状态最大限度地接近理想状态。顶推到位后,轴向偏位满足1 cm的限差,桥墩变形基本满足施工规范的要求,最终顺利完成顶推过程。  相似文献   

Compression limit state of HVAC submarine cables     

《Applied Ocean Research》2016

An industry accepted standard does not currently exist for determination of compression limits in a subsea cable. This has resulted in most manufacturers specifying that subsea cables are not permitted to be axially loaded in compression.Additionally industry guidance does not exist regarding the consequences of inducing compression forces within subsea cables and the resulting effect on cable integrity. Industry recommended practice and guidance also does not have any information regarding experimental test arrangements to determine allowable compression levels within a subsea cable. This lack of modelling/testing guidance along with manufacturer recommendations of zero compressive loads within subsea cables results in overly conservative and restrictive design parameters for subsea cable installation and use.Due to the complex interaction within a subsea cable structure, such as contact interaction and friction between cable strands, theoretical modelling has been unable to provide reliable stress predictions and therefore an experimental testing regime is required if compression limits within the cable are to be appropriately determined. This paper describes combined axial and bending test arrangements that can be used as a guideline for determination of allowable compression limits for subsea cables.  相似文献   

Experimental investigation of the effects of the coverage of helical strakes on the vortex-induced vibration response of a flexible riser     

《Applied Ocean Research》2016

The effects of different helical strake coverage on the vortex-induced vibration (VIV) of a model flexible riser were studied experimentally, with the aim of further improving the understanding of VIV responses. Uniform and linearly sheared currents were simulated to study response parameters such as non-dimensional displacement, fatigue damage, suppression efficiency, and the comprehensive evaluation is further studied. Test results of the bare model for a uniform current showed that the behavior of both the standing wave and traveling wave dominated VIV displacement. However, for a linearly sheared current, traveling wave behavior dominated VIV displacement in the high-velocity range. The results of the straked model tests indicated that the response was strongly dependent upon the amount of coverage of helical strakes. The flexible riser with 75% strake coverage gave the best comprehensive evaluation in a uniform current, and 50% strake coverage gave the best comprehensive evaluation in a linearly sheared current.  相似文献   

全珊瑚骨料海水混凝土力学性能试验研究   总被引：3，自引：1，他引：2  

糜人杰  余红发  麻海燕  达波  袁银峰  张小平  朱海威  窦雪梅 《海洋工程》2016,34(4):47-54

为了探讨全珊瑚骨料海水混凝土的基本力学性能,并比较其与普通混凝土和轻集料混凝土的差异,通过实验系统测定了珊瑚混凝土的基本力学性能,建立了其轴心抗压强度(f_(c,m))、劈裂抗拉强度(f_(sp,m))、抗折强度(f_(t,m))与立方体抗压强度(f_(cu,m))之间的线性关系与计算公式。结果表明:在强度等级C20~C50的范围内,珊瑚混凝土的f_(c,m)和f_(sp,m)分别比普通混凝土的f_(c,m)和f_(sp,m)高出10%~48%和9%~33%,随着强度等级的提高,两种混凝土之间的差距在减小。珊瑚混凝土的f_(t,m)与普通混凝土的ft,m之间的差异规律与强度等级有关,较低强度等级的C30珊瑚混凝土ft,m比普通混凝土的f_(t,m)要高4%,而较高强度等级的C55珊瑚混凝土f_(t,m)比普通混凝土的f_(t,m)低13%。较高强度等级的C50珊瑚混凝土f_(c,m)、f_(sp,m)和f_(t,m)分别比页岩陶粒轻集料混凝土的f_(c,m)、f_(sp,m)和f_(t,m)低11%、0.9%和4%。  相似文献   

Development of Prebored Screw Pile Method and Evaluation of Its Bearing Characteristics     

Chung-Won Lee  Sung-Yong Park 《Marine Georesources & Geotechnology》2016,34(1):42-56

The pile-driving method produces considerable noise and vibrations. Hence, an auger-drilled pile method was developed as a low-noise and -vibration substitute. However, this method does not guarantee the bearing capacity of the pile unless some amount of pile-driving is performed. Therefore, the noise and vibration problems cannot be completely solved. In this study, a prebored screw pile method is proposed to solve these problems. In this method, piles are constructed by the rotary penetration of a screw pile into a prebored hole filled with some cement milk and whose diameter is smaller than that of the screw pile. To determine the shape of the screw pile, laboratory tests with model screw piles were conducted. Also, field load tests were conducted on an actual screw pile fabricated based on the laboratory test result and on a smooth-surfaced pile. In addition, the behavior of the screw pile was estimated by using three-dimensional finite element analysis. The results of the field load test and the numerical simulation showed that the ultimate bearing capacity and the unit skin friction of the screw pile are very superior to those of the smooth-surfaced pile and the cement milk is an important factor in the prebored screw pile method.  相似文献