Recalibration of the Garnet-Muscovite (GM) Geothermometer and the Garnet-Muscovite-Plagioclase-Quartz (GMPQ) Geobarometer for Metapelitic Assemblages   总被引：7，自引：0，他引：7  

WU  CHUN-MING; ZHAO  GUOCHUN 《Journal of Petrology》2006,47(12):2357-2368

The garnet–muscovite (GM) geothermometer and the garnet–muscovite–plagioclase–quartz(GMPQ) geobarometer have been simultaneously calibrated underconditions of T = 450–760°C and P = 0·8–11·1kbar, using a large number of metapelitic samples in the compositionalranges = 0·53–0·81, = 0·05–0·24, = 0·03–0·23 in garnet, = 0·17–0·74 in plagioclase, and Fe = 0·04–0·16, Mg =0·04–0·13, Al^VI = 1·74–1·96in muscovite on the basis of 11 oxygens. The resulting GM thermometeryielded similar temperature estimates (mostly within ±50°C)to that of the garnet–biotite thermometer, and successfullydiscerned the expected systematic temperature change of progradesequences, thermal contact zones and an inverted metamorphiczone. The resulting GMPQ barometer yielded similar pressureestimates (mostly within ±1·0 kbar) to the garnet–aluminumsilicate–plagioclase–quartz (GASP) barometer andplaced the aluminosilicate-bearing samples in the appropriatealuminosilicate stability fields. Application of the GMPQ barometerto thermal contact aureoles or rocks within limited geographicalareas confirmed the expected constant pressures that shouldexist in these settings. The random errors of the GM thermometerand the GMPQ barometer are estimated to be ±16°Cand ±1·5 kbar, respectively. When biotite or aluminosilicateis absent in metapelites, metamorphic P–T conditions maybe determined by simultaneously applying the GM thermometerand the GMPQ barometer. KEY WORDS: application; calibration; geobarometer; geothermometer; metapelite  相似文献   

Petrographic and mineralogical study of hydrothermal alteration of the Rokko Granite at Hakusui-kyo and Horai-kyo along the Arima-Takatsuki Tectonic Line in western Japan     

Toru Shimizu  Mitsuo Manaka  Kohei Kazahaya  Hitoshi Tsukamoto 《Island Arc》2021,30(1):e12407

Field, hand specimen, and microscopic investigations alongside X-ray diffraction analyses revealed four types of hydrothermal alteration (Type-A, -B, -C, and -D) based on the mode of occurrence of altered rocks and alteration mineral assemblage at Hakusui-kyo and Horai-kyo along the Arima-Takatsuki Tectonic Line (ATTL) in western Japan. Type-A alteration locally occurred as gray alteration halos with sulfide minerals. Type-B and -C alterations were confined to fault gouge veins and occurred as greenish-gray veins and brown veins, respectively. Type-C alteration crosscut Type-B alteration. These alterations were associated with a number of granitic fragments including cohesive breccia and micrographic facies. Type-D alteration occurred locally in brown sediments. Different mineralogical features in the four alterations are summarized as (Type-A) illite; (Type-B) chlorite; (Type-C) limonite (Fe³⁺ hydroxides and goethite) and calcite; and (Type-D) limonite. We propose that the alterations can be broadly divided into Paleocene hydrothermal alteration (Type-A) and post-Late Miocene hydrothermal alteration (Type-B, -C, and -D): Type-A alteration occurred at approximately 200 °C during hydrothermal activity after a granitic intrusion in Late Cretaceous; Type-B, -C and -D alterations occurred under hydrothermal activity accompanying deep fluids with repeated ascents invoked by the seismicity of the ATTL after the Late Miocene. The fluids may have been the “Arima-type thermal waters” (i.e., mixtures of convective groundwater and Na-Ca-Cl-HCO₃-type fluids). Type-B alteration occurred in fractures at depths where the temperature was ≥150 °C. Type-C alteration overprinted Type-B alteration as a result of mixing of new deep fluids and descending oxidized meteoric water near the surface. Fe³⁺ hydroxides and calcite precipitated from the fluids due to the oxidation of Fe²⁺ and the degassing of CO₂, respectively, at ambient to near-boiling temperatures. When the ascending fluids gushed out from the fractures, they generated Type-D alteration at the surface under similar temperature conditions due to the oxidation of Fe²⁺.  相似文献   

贵州梵净山前寒武系甚低级变质作用研究     

王河锦  安佳丽  王冠玉  晏玉  陈梦瑶 《地质学报》2019,93(1):170-178

本文运用伊利石结晶度、绿泥石结晶度、云母b0值和绿泥石地质温度计研究了梵净山前寒武系甚低级变质作用。结果表明经Kisch伊利石结晶度标样校正的伊利石结晶度Kübler指数为0.20~0.99°Δ2θ,绿泥石结晶度árkai指数为0.22~0.63°Δ2θ。由此阐明梵净山前寒武系经历了成岩作用到浅变质作用的影响,迄今依然保留了成岩带、近变质带和浅变质带的岩石记录。成岩岩石具有伊蒙混层特征成岩指示矿物,浅变质带具有钠云母特征变质指示矿物。钾云母(伊利石)b0值范围为:0.9000~0.9045nm;平均0.9018nm,b0值累积频率曲线分布介于典型中压—中低压系列之间,估算的压力为366MPa。峰期变质温度为293~364℃,平均342℃,古变质温压梯度为27℃/km。近变质带界线穿越地层和梵净山背斜轴线,表明甚低级变质作用为成岩-构造运动同期或后期构造增厚引起下部和底部岩石随温压的升高而产生的。  相似文献   

孔隙衬里绿泥石的成因及对储层性能的影响   总被引：1，自引：0，他引：1  

田建锋  喻建  张庆洲 《吉林大学学报(地球科学版)》2014,44(3):741

孔隙衬里绿泥石发育的砂岩大多属于优质储层,前人将其归功于绿泥石对孔隙的保护作用。按照孔隙衬里绿泥石形成的铁质来源,可划分为同沉积黏土膜转化型、富铁镁物质溶蚀再结晶型和转化与直接结晶混合型3种类型。通过国内外富孔隙衬里绿泥石砂岩实例的对比研究表明,孔隙衬里绿泥石可以通过抑制自生石英生长、提高抗压实能力、指示早期碱性溶蚀发育程度和堵塞孔喉等4种方式影响储层性能,且不同成因的孔隙衬里绿泥石对储层性能影响方式不同,同一成因绿泥石在不同成岩阶段的影响方式也不同。中成岩A期以前,转化型孔隙衬里绿泥石通过占据孔喉和提高抗压能力影响储层,而溶蚀结晶型孔隙衬里绿泥石主要指示火山物质发生碱性溶蚀的程度;只有砂岩成岩阶段达到中成岩B期以后,孔隙衬里绿泥石对石英生长的抑制作用才得到充分体现。  相似文献   

湖南常宁新盟山英安玢岩岩石成因及其与矿化关系研究     

赵增霞  冯佐海  刘磊  肖阳 《高校地质学报》2022,28(2):153-164

通过对湖南省常宁市新盟山英安玢岩进行岩石地球化学、锆石U-Pb定年以及绿泥石矿物化学等综合研究,结合前人研究成果,探讨其岩石地球化学性质、形成时代、物质来源及其与成矿作用的关系.LA-ICP-MS锆石U-Pb定年结果显示,新盟山英安玢岩的n(206Pb)/n(238U)加权平均年龄为152.9±1.2 Ma,属于晚侏罗...  相似文献   

绿泥石片岩各向异性特性研究   总被引：9，自引：0，他引：9  

刘胜利  陈善雄  余飞  赵文光 《岩土力学》2012,33(12):3616-3623

为研究十堰地区片岩的各向异性特性,开展了武当群绿泥石片岩长方体试样的单轴压缩和圆盘试样的间接拉伸试验,探讨了试样各向异性的力学特性和在不同受力状态下的变形破裂特性,揭示了不同变形破裂的力学机制。研究表明,武当群绿泥石片岩具有明显的各向异性性质,平行片理方向强度高,垂直片理方向强度低。该片岩特殊的定向排列片束状构造和片理间的弱胶结作用,致使不同方向上的破坏特征具有明显差异,其力学机制也不相同。在压应力作用下,泊松效应容易引起平行片理面的张拉劈裂和压杆失稳,垂直片理方向容易发生片理面间的剪切破坏。在同一方向上强度具有一致性,即平行片理面抗压和抗拉强度均较垂直片理面强度大。由于片理面间的抗拉承载力极低,在小角度劈裂荷载下,容易发生张拉劈裂和拉剪破坏,因此,实际工程中应尽可能避免片理面间的受拉破坏和沿片理的拉剪破坏。研究结果可以为隧道、边坡支护加固和防水处理提供参考。  相似文献   

短波红外光谱技术在矽卡岩型矿床中的应用——以鄂东南铜绿山铜铁金矿床为例   总被引：2，自引：2，他引：0  

张世涛  陈华勇  张小波  张维峰  许超  韩金生  陈觅 《矿床地质》2017,36(6):1263-1288

铜绿山铜铁金矿床是长江中下游铜铁多金属成矿带最重要的矽卡岩型矿床之一,矿床的形成与铜绿山石英闪长岩株体密切相关,矿体主要沿北北东向断裂产于石英闪长岩与大理岩/白云质大理岩的接触带,形成钙-镁复合型矽卡岩铜多金属矿化。围岩蚀变由致矿岩体到接触-蚀变矿化中心为:绢云母-绿泥石-钾化带、高岭石-绿泥石-弱矽卡岩化带、皂石-绿泥石-强矽卡岩化带。蚀变矿化期次可分为岩浆-热液期和表生期,其中,岩浆-热液期可分为矽卡岩阶段、退化蚀变阶段、氧化物阶段、硫化物阶段和碳酸盐阶段。绿泥石是钻孔岩芯中出现最多且分布最为广泛的蚀变矿物之一。经短波红外光谱(SWIR)研究发现,从蚀变矿化中心到外围,绿泥石出现由铁绿泥石/铁镁绿泥石逐渐转变为镁绿泥石,且绿泥石Fe-OH特征吸收峰位值(Pos2250)显示出从高值变为低值的趋势。结合其他蚀变矿物的空间分布特征,文章提出绿泥石的高Fe-OH特征吸收峰位值(Pos22502253 nm)与金云母、蛇纹石、绿帘石、皂石和高岭石的大量出现,对指示铜绿山矽卡岩型矿床的矿化中心具有一定的作用。  相似文献   

Formation of chlorite rims and the impact of pore-lining chlorite on reservoir quality: a case study from Shiqianfeng sandstones in upper Permian of Dongpu Depression,Bohai Bay Basin,eastern China     

P. J. Ma  C. Y. Lin  C. M. Dong  Y. F. Xu 《Australian Journal of Earth Sciences》2017,64(6):825-839

The source material, precursor and formation processes of chlorite rims, and impact of pore-lining chlorite on reservoir quality of the Shiqianfeng sandstones, Dongpu Depression, Bohai Bay Basin, China, are studied using an integrated approach, including core observation, point-count analysis of thin-sections, scanning electron microscopy, electron microprobe analysis and cathode luminescence. The petrographic analysis shows that chlorite rims consist of grain-coating chlorite, poorly crystalline pore-lining chlorite and euhedral-crystallised pore-lining chlorite. The chemical composition shows that pore-lining chlorite is mainly Fe-rich with an average of 0.785 for Fe/(Fe+Mg) ratio. Petrographic analysis shows a large amount of volcanic dust (3.0～16.0 vol%, average of 7.93 vol%) in Shiqianfeng sandstones, which determines the formation of poorly crystalline pore-lining chlorite. Transformation of volcanic dust to smectite rims started with shallow burial depth at an early diagenetic stage, followed by in situ alteration of the smectite rims to poorly crystalline chlorite rims. Euhedral-crystallised chlorite mainly develops in sandstones with high porosity, high permeability and open flow systems. Pore-lining chlorite can inhibit quartz overgrowth but cannot effectively prevent pore-filling of authigenic quartz, carbonate and kaolinite cements, and therefore cannot prevent porosity destruction. However, the occurrence of pore-lining chlorite is a barometer of good reservoir quality and intense hydrodynamic conditions.  相似文献   

鄂尔多斯盆地镇泾区块上三叠统延长组砂岩中绿泥石矿物特征   总被引：11，自引：0，他引：11  

张霞 《地质学报》2011,85(10):1659-1671

本文对鄂尔多斯盆地镇泾区块上三叠统延长组长8油层组砂岩中绿泥石矿物的类型、赋存状态、形成时间、晶体化学特征及成因机制进行了较为系统的研究.结果表明研究区的绿泥石以铁镁绿泥石和铁斜绿泥石为主,包括陆源碎屑绿泥石、自生绿泥石和蚀变绿泥石3种,自生绿泥石又包括颗粒包膜、孔隙衬里和孔隙充填绿泥石3种,以孔隙衬里绿泥石为主,形成...  相似文献   

鄂尔多斯盆地东南部延长组储层成岩体系研究   总被引：8，自引：2，他引：6  

丁晓琪  张哨楠  葛鹏莉  易超 《沉积学报》2011,29(1):97-104

鄂尔多斯盆地东南部延长组具有丰富的油气资源,储集层为一套致密低渗透砂岩,油气的富集与致密低渗透背景下的高效储层有关。通过铸体薄片、背散射、扫描电镜及能谱分析,结合孔、渗测定,认为:①延长组高效储层的形成与绿泥石环边有密切关系,绿泥石环边的出现是三角洲前缘沉积环境、富黑云母的长石砂岩和咸—微咸水的湖泊水体在空间上耦合的产物;②绿泥石环边抵消了一部分埋藏过程中上覆地层的机械压实作用,减缓了由于压实作用而引起的原生孔隙的减低,而且有抑制石英次生加大的作用;③同生期形成的方解石可以使颗粒呈嵌晶接触,形成致密层,但是这部分方解石量小且分布不均匀;④自生石英在纵向上变化明显,封闭体系中形成的SiO2由于绿泥石环边的抑制作用,以雏晶的形式产出;而半封闭体系中形成的SiO2可向上发生运移,在绿泥石环边不连续或欠发育的层段以加大边的形式产出。通过成岩体系研究,可以明确高效储层的形成机理,指导岩性油气藏的勘探。  相似文献