Coupled HM analysis using zero‐thickness interface elements with double nodes—Part II: Verification and application     

J. M. Segura  I. Carol 《国际地质力学数值与分析法杂志》2008,32(18):2103-2123

In a companion Part I of this paper (Int. J. Numer. Anal. Meth. Geomech. 2008; DOI: 10.1002/nag.735 ), a coupled hydro‐mechanical (HM) formulation for geomaterials with discontinuities based on the finite element method (FEM) with double‐node, zero‐thickness interface elements was developed and presented. This Part II paper includes the numerical solution of basic practical problems using both the staggered and the fully coupled approaches. A first group of simulations, based on the classical consolidation problem with an added vertical discontinuity, is used to compare both the approaches in terms of accuracy and convergence. The monolithic or fully coupled scheme is also used in an application example studying the influence of a horizontal joint in the performance of a reservoir subject to fluid extraction. Results include a comparison with other numerical solutions from the literature and a sensitivity analysis of the mechanical parameters of the discontinuity. Some simulations are also run using both a full non‐symmetric and a simplified symmetric Jacobian matrix. On top of verifying the model developed and its capability to reflect the conductivity changes of the interface with aperture changes, the results presented also lead to interesting observations of the numerical performance of the methods implemented. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

DEM analyses of crack propagation in flawed rock mass under uniaxial compressionEI北大核心CSCD     

Jiang Ming-jing  Zhang Ning  Shen Zhi-fu  Chen He 《岩土力学》2015,(11):3293-+

A contact model for rock is established and imbedded into a DEM software by summarizing the bond granule tests. DEM simulation of uniaxial compression test on the pre-cracked Lac du Bonnet granite is performed, and then stress distributions are further analyzed and compared with the theoretical results. Different fracture criteria are employed to predict the crack initiation angles that are compared with theoretical ones. The results show that the failure modes obtained from DEM simulation are similar to experimental results, and stress distributions in DEM simulation are qualitatively similar to theoretical values. When the angle of pre-crack is small, the lateral stresses are compressive and tensile. The compressive strains concentrate at two edges, resulting in the tensile strains in the up-and downward cracks. When the angle of the pre-crack is large enough, the stress concentration is unobvious, leading to a discrepancy between the DEM and theoretical results. The crack extension angle resulting from uniaxial compression measured from DEM tests are in good agreement with those acquired from experimental tests. These angles are consistent with theoretical predictions by the maximum circumferential stress criterion and the maximum energy release rate criterion.  相似文献   

基于高清工业相机的盾构隧道裂缝智能识别算法分析     

李梓豪  唐超 《测绘通报》2021,(8):83-87,101

裂缝一直是隧道病害的重点检测对象,但传统人工巡检仅能通过肉眼发现后记录,人工识别精准度与效率完全取决于个人经验判断,无信息化手段辅助,作业效率识别精度亟待提升。针对以上问题,本文借助高清工业相机成像分辨率高、采集速度快等特点,将高清工业相机部署于轨道车上获取隧道表面裂缝病害信息,大幅提高了隧道裂缝识别效率,将识别精度提升至0.2 mm,同时融入优化的Cascade R-CNN算法,在有监督情况下训练隧道裂缝样本,最终实现了隧道裂缝病害的高效提取,同时研发了一套包含硬件数据采集、数据处理软件、数据管理平台的裂缝病害识别路线,真正意义上破除了识别慢、精度低、靠经验、难管理的技术壁垒。  相似文献   

An approach to determining the thicknesses of shear bands with an echelon‐crack structure     

G. S. Wang  L. W. Kong  C. F. Wei 《国际地质力学数值与分析法杂志》2013,37(6):618-640

In this paper, the internal structure of shear band is investigated, and a model of the shear band with an echelon crack structure is developed. The model assumes the shear band to be composed of two conjugate sets of echelon cracks, such that the smaller echelon cracks are embedded in the space of the larger ones. The additional strain induced by the echelon cracks and the anisotropic development of the compliance tensor in the shear band zone are analyzed. The critical crack density at the onset of shear band is obtained by applying the bifurcation condition. Deviating from previous approaches, the new procedure evaluates the thickness of shear band based on the geometrical characteristics of echelon crack arrays and the failure probability of grain boundaries in the longitudinal direction at the onset of shear band. Parametric analysis shows that grain size, internal friction angle, dilation angle, and failure probability of grain boundaries are the dominant factors that account for the shear band thickness. The calculated results are consistent with the experimental data available in the literature. The model soundly explains that the measurements of the shear band thickness are generally scattered, ranging from 4 to 30 (or even more) times the grain size. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

Mathematical model of a Hot Dry Rock system   总被引：1，自引：0，他引：1  

Norbert Heuer  Tassilo Küpper  Dirk Windelberg 《Geophysical Journal International》1991,105(3):659-664

  相似文献   

基于高密度电阻率法的土体干缩裂隙动态发育过程精细监测研究     

章君政唐朝生巩学鹏周启友程青吕超施斌 《岩土力学》2023,(2):392-402

土体在气候作用下发育干缩裂隙是一种常见的自然现象,裂隙的存在会极大弱化土体的工程性质,诱发许多岩土与地质工程问题。为了实时掌握黏性土中干缩裂隙网络的发展状态,提出了一套基于高密度电阻率层析成像技术（ERT）的土体干缩裂隙动态发展过程精细监测方法。分别开展模型试验及原位试验,利用自行研制的测定系统持续采集电流-电位差数据,随后利用自行开发的有限元法电阻率层析成像（FemERT）系统进行数据处理,获取了裂隙网络在不同发育阶段的空间分布特征。结果表明：（1）ERT可以实现土体裂隙发育过程的精细监测,具备监测三维裂隙网络几何形态的能力,裂隙宽度的识别精度达到毫米级,裂隙深度的识别精度达到厘米级;（2）ERT的感度分布特征解释了裂隙发育对于土体电阻率的影响规律,测定电阻值时程曲线因裂隙产生位置的不同而呈现不同的变化规律;（3）反演电阻率及其相对变化率（Rev）可以直观表征裂隙网络在不同阶段的空间几何形态,凸显裂隙动态发育过程对于土体导电性的影响。  相似文献   

基于裂隙扩展的多级岩质边坡开挖卸荷破坏路径分析     

王川  冷先伦  张占荣  杨闯  陈健 《岩土力学》2023,(4):1190-1203

开挖卸荷作用下裂隙岩体边坡的破坏模式与路径分析是边坡工程灾害研究的热点之一,准确识别边坡的潜在破裂路径对工程安全施工和支护优化设计具有重要意义。依据断裂扩展分析方法,将裂隙扩展判别的理论方法开发并应用于数值模拟分析中,通过裂隙尖端应力强度因子计算、裂隙扩展模式识别、裂隙起裂角演算、裂隙扩展交汇等技术实现了岩体中断续裂隙的起裂、扩展与贯通演化过程的快速模拟;以某高速公路沿线裂隙岩体路堑边坡为对象,采用提出的模拟方法分析了多级开挖卸荷作用下坡体裂隙的扩展机制与边坡的破坏路径。结果表明：裂隙岩体边坡从上至下多级开挖过程中,坡肩裂隙首先起裂,并通过拉张型扩展逐渐发展为优势裂隙;随着边坡下挖,优势裂隙沿坡面向下逐步发生拉张/剪切混合型扩展并与既有裂隙交汇,在边坡中上部形成阶梯状扩展破坏路径;裂隙扩展至边坡下部及坡脚后扩展模式由拉张/剪切混合型转化为剪切型,并最终以弧形剪切面从坡脚出露。研究揭示了裂隙岩体边坡多级开挖卸荷作用下上部阶梯状拉张/剪切混合型破裂-下部弧形剪切型破裂的复合破坏模式,可为边坡工程支护设计和施工稳定性控制提供新思路。  相似文献   

交叉裂隙岩体裂纹扩展试验及混合有限-离散元数值模拟研究     

梁东旭  张农  荣浩宇 《岩土力学》2023,(4):1217-1229

对预制交叉裂隙岩石试样进行裂纹扩展试验,研究了裂纹萌生、扩展、聚合过程,分析了主裂隙和轴向载荷夹角及主次裂隙夹角对裂纹起裂应力和聚合应力的影响,并用混合有限元-离散元程序,即图形处理器并行化的3D Y-HFDEM代码对试验进行了仿真计算,实现了岩石破坏从连续介质向非连续介质的过渡,对裂纹类及损伤破坏模式进行了识别,捕捉到了试验中难以发现的现象。研究表明：随主裂隙与轴向载荷夹角增加,裂纹聚合区的拉伸裂纹数量增加;裂纹起裂和聚合应力与主裂隙与轴向载荷夹角成正比;主次裂隙夹角增加,岩石的破坏模式由拉伸破坏转为剪切破坏,交叉裂隙加剧岩石破碎程度;主裂隙尖端萌生扩展的拉伸-剪切混合裂缝引起的破坏在岩石破坏中占主导地位,是导致岩体失去承载能力的主控裂纹;混合有限元-离散元仿真软件GPGPU并行化的3D Y-HFDEM IDE在岩石裂纹扩展研究中具有优势,可以捕捉实验室难以发现的损伤断裂类型,可以作为岩石裂纹扩展研究的有力工具。  相似文献   

鄂南彬州—双龙地区断裂特征与铀成矿关系探讨     

刘坤鹏  于宏伟  武正乾  冯博  刘凯鹏  李卫 《地质论评》2023,69(Z1):171-174

  相似文献   

昆明呈贡石灰岩上覆红黏土干缩裂隙的温度效应     

何岱洵 《地质与勘探》2023,59(5):1083-1092

温度是影响土体干缩开裂的重要外部环境因素之一。为研究温度对红黏土干缩裂隙的影响,以昆明呈贡石灰岩上覆红黏土为对象,经风干、碾碎和筛分后,选取2 mm以下的细颗粒,用正方形钢化玻璃容器制备9个厚度为10 mm的饱和泥浆样,分成3组,每组3个平行样,利用控温烘箱分别进行30℃、50℃和70℃的干燥试验,试验过程中定时称重试样和对土样表面进行拍照,然后用PCAS软件对照片进行图像处理。结果表明：红黏土的蒸发过程可分为3个阶段,干缩裂隙的形成和发展可分为5个阶段;温度升高,干燥完成时间减短,常速率阶段的蒸发速率和蒸发量增大,最终含水率降低;初始临界含水率随温度升高而增大;随着土体含水率持续减小,表面裂隙率先缓慢增加,然后快速增大,最后趋于稳定;温度升高,裂隙交点数、裂隙条数、裂隙总长度和土块数减少,裂隙平均长度、裂隙平均宽度、表面裂隙率、土块平均面积、土块最大面积、干缩厚度和干密度增大。温度显著影响红黏土的水分蒸发过程,干缩裂隙的形成和发展,以及表面裂隙结构和形态。  相似文献