Seismic Stability of Gravity Retaining Structures by Pseudo-Dynamic Method     

Rui Huang  Tang-Dai Xia 《Marine Georesources & Geotechnology》2016,34(1):1-9

An analytical expression of a gravity retaining wall's seismic stability against sliding and overturning is proposed in this article. The derivation, aiming at the cohesionless soil with inclined backfill surface and nonvertical wall back, is based on limit equilibrium analysis and the pseudo-dynamic method. The variations of the sliding and overturning stability safe factors with the horizontal seismic acceleration are investigated for different seismic amplification factors, soil friction angles, wall friction angles, vertical seismic acceleration coefficients, wall back inclination angles, and backfill surface inclination angles. The results indicate that the soil friction and horizontal seismic action significantly impact the seismic stability. The increase of vertical earthquake action changes the curvature of stability factor curves. The wall friction and back inclination strengthen the gravity retaining wall's resistance to sliding and overturning failure while the backfill surface inclination plays a negative role in the seismic stability. We also found that the seismic stability safe factors calculated by the proposed method are larger but more reasonable than those by the Mononobe-Okabe method.  相似文献   

Development of Prebored Screw Pile Method and Evaluation of Its Bearing Characteristics     

Chung-Won Lee  Sung-Yong Park 《Marine Georesources & Geotechnology》2016,34(1):42-56

The pile-driving method produces considerable noise and vibrations. Hence, an auger-drilled pile method was developed as a low-noise and -vibration substitute. However, this method does not guarantee the bearing capacity of the pile unless some amount of pile-driving is performed. Therefore, the noise and vibration problems cannot be completely solved. In this study, a prebored screw pile method is proposed to solve these problems. In this method, piles are constructed by the rotary penetration of a screw pile into a prebored hole filled with some cement milk and whose diameter is smaller than that of the screw pile. To determine the shape of the screw pile, laboratory tests with model screw piles were conducted. Also, field load tests were conducted on an actual screw pile fabricated based on the laboratory test result and on a smooth-surfaced pile. In addition, the behavior of the screw pile was estimated by using three-dimensional finite element analysis. The results of the field load test and the numerical simulation showed that the ultimate bearing capacity and the unit skin friction of the screw pile are very superior to those of the smooth-surfaced pile and the cement milk is an important factor in the prebored screw pile method.  相似文献   

AS350B3型直升机在中高山航空物探测量中的优势     

李健  郭亮  肖刚毅  刘志强  徐明  金久强  王志博  邓茂盛  李冰 《物探与化探》2018,(1):192-198

中高山地区作业的航空地球物理勘探飞行器需要有高原适航性。通过对比空中国王350ER在起降条件、最大升限、最大续航能力及高原机动能力等特点,提出了在中高山地区的低高度、大比例尺的航空地球物理勘探飞行器的选型原则及飞行方法。通过甘肃某测区的实际测量飞行验证了该原则和方法的可行性。分析结果显示,AS350B3型直升机在中高山地区作业时表现出的实际飞行性能满足在该类型区域低高度、大比例尺的航空地球物理勘探的要求。  相似文献   

基于广域电磁法的页岩气有利区预测——以渝东北巫山地区为例     

孟凡洋  包书景  陈科  王鹏  李柳德 《物探与化探》2018,(1):68-74

渝东北巫山地区是重要的页岩气勘探远景区,勘探程度较低。本次研究以岩石物理和测井数据为基础,以广域电磁法为手段,开展该区的页岩气有利区评价。通过对地表样品及井孔电阻率测井资料的分析,揭示研究区目的层富有机质页岩层电阻率表现为明显低阻特征,与上覆下伏地层电性差异明显,表明本区分布的上奥陶统五峰—下志留统龙马溪组富有机质页岩具备开展电法勘探工作的物性条件。在对电磁资料处理解释的基础上,查明了重庆巫山地区"隆凹相间"的构造格局,断裂性质主要为逆断层;目的层上奥陶统五峰组—下志留统龙马溪组富有机质泥页岩连续稳定分布,低阻特征明显,埋深范围在800~4 800 m之间。综合考虑目的层页岩电阻率、极化率、埋深等因素,预测出页岩气有利区3个,区内富有机质页岩发育,页岩气勘探前景较好。  相似文献   

区域地球化学评价中变异系数校正参数的意义     

刘明义  张晶  孟广路  胡立 《现代地质》2018,32(5):1074

通过对我国新疆西天山各地球化学区数据的归纳和研究,计算西天山12种常见成矿元素在各地球化学区的富集系数,提出校正系数公式,并将变异系数进行合理的校正与排序。与实际矿床和矿点结合,验证校正系数的正确性和适用性,预测元素成矿有利顺序和规律,总结出西天山富集系数与变异系数在成矿中的制约关系。该方法实现了不同成矿元素之间成矿条件的对比,拓宽了地球化学参数的适用性,提高了在勘探程度较低的地区地球化学评价方法的准确性,为地球化学评价提供科学依据。  相似文献   

Petrology and PGE Abundances of High‐Cr and High‐Al Podiform Chromitites and Peridotites from the Bulqiza Ultramafic Massif,Eastern Mirdita Ophiolite,Albania     

QIU Tian  YANG Jingsui  MILUSHI Ibrahim  WU Weiwei  MEKSHIQI Nezir  XIONG Fahui  ZHANG Cong  SHEN Tingting 《《地质学报》英文版》2018,92(3):1063-1081

The Bulqiza ultramafic massif, which is part of the eastern Mirdita ophiolite of northern Albania, is world renowned for its high-Cr chromitite deposits. High-Cr chromitites hosted in the mantle section are the crystallized products of boninitic melts in a supra-subduction zone (SSZ). However, economically important high-Al chromitites are also present in massive dunite of the mantle-crust transition zone (MTZ). Chromian-spinel in the high-Al chromitites and dunites of the MTZ have much lower Cr# values (100Cr/(Cr+Al)) (47.7–55.1 and 46.5–51.7, respectively) than those in the high-Cr chromitites (78.2–80.4), harzburgites (72.6–77.9) and mantle dunites (79.4–84.3). The chemical differences in these two types of chromitites are reflected in the behaviors of their platinum-group elements (PGE). The high-Cr chromitites are rich in IPGE relative to PPGE with 0.10–0.45 PPGE/IPGE ratios, whereas the high-Al chromitites have relatively higher PPGE/IPGE ratios between 1.20 and 7.80. The calculated melts in equilibrium with the high-Cr chromitites are boninitic-like, and those associated with the high-Al chromitites are MORB-like but with hydrous, oxidized and TiO2-poor features. We propose that the coexistence of both types of chromitites in the Bulqiza ultramafic massif may indicates a change in magma composition from MORB-like to boninitic-like in a proto-forearc setting during subduction initiation.  相似文献   

上海砂性软土地层水平定向钻进泥浆性能调控技术     

朱永刚  郑文龙  乌效鸣  张晓静  林朋皓  朱旭明 《探矿工程》2018,45(5):58-62

上海地区水平定向钻进铺管（HDD）钻遇不易成孔的砂性软土的概率甚高,这种地层对泥浆性能有特殊要求。但目前普遍使用的复配型增效商品土粉基调相近,难以就大量工程个案恰如其分地发挥关键功效。为此,论述了该类工程环境下泥浆性能设计要点,分析了材料添配的作用机理,重点给出了泥浆密度、粘度、切力以及失水量等参数调控的宜于实用的若干配材技术,以提供相类似工程条件下泥浆运用的可参考方法。  相似文献   

高陡岩石边坡软体护坡技术设计及施工实践          下载免费PDF全文

孙小杰  张辉  杜炤伟 《探矿工程》2018,45(4):78-81

为了消除济南市燕翅山北侧采矿遗留的高陡岩石边坡的地质灾害隐患,恢复自然植被,通过施工砼基座、施工砼格构梁、砌筑软体生态袋和挂网喷播等多种技术方法进行了综合治理,消除了滑坡和崩塌等地质灾害隐患,整个坡面植被覆盖率超过99%,消除了视觉污染,恢复了当地生态环境,该工程成功的设计及施工实践对类似高陡岩石边坡有很好的指导和借鉴作用。  相似文献   

耐高温高压复合保温管研究          下载免费PDF全文

罗光强  周策  刘一民  韩锐 《探矿工程》2018,45(8):15-19

耐高温高压复合保温管主要解决超高温高压环境下钻孔测量问题。为攻克超高温高压环境下真空绝热保温、高压密封等关键技术,研究的耐高温高压复合保温管为“超高温钻孔测量仪”提供一种耐高温承压管,使用环境温度可达270 ℃,压力120 MPa。通过室内测试与现场应用,说明其满足超高温高压要求,可应用于高温地热能钻探工程、干热岩钻探工程、科学钻探工程、深部矿产资源勘探和深部油气资源勘探等工程中,为超高温大深度钻井测量提供技术支撑。  相似文献   

四川平武银厂金矿勘探复杂地层钻进技术          下载免费PDF全文

杨福全  龙海涛 《探矿工程》2018,45(6):36-39

四川平武银厂金矿区钻探施工中遇到漏失、缩径、岩心破碎、易孔斜和钻孔事故频发等施工难题,施工难度极大。本文结合地层特点,通过采用绳索取心液动锤、高密度低失水泥浆体系、跟管钻进等工艺技术措施,提高了钻进效率和施工质量,大幅度减少了孔内事故的发生,为顺利完成钻孔施工任务奠定了坚实的基础。  相似文献