"渗流-管流耦合模型"的物理模拟及其数值模拟   总被引：16，自引：2，他引：16  

陈崇希  万军伟  詹红兵  沈仲智 《水文地质工程地质》2004,31(1):1-8

井孔 -含水系统问题是当今水文地质学最重要的研究课题之一。长期以来 ,水文地质模型中对井孔的刻画基本上都是引用“热传导”中的“线汇”理论 ,需要人工预先给定线汇 线源的流量或水头的分配 ,其正确性或适用性至今没有得到理论证明。陈崇希 (1993 )提出的“渗流 -管流耦合模型”和“等效渗透系数”在理论上已解决多个水文地质问题 ,也用于几个实例 ,本文再用物理模拟检验其可靠性。论文针对具有典型意义的河床下水平井或傍河垂直井地下水流问题做了砂槽物理模拟 ,并用基于“渗流 -管流耦合模型”和“等效渗透系数”的数值方法仿真模拟了此条件下地下水流的规律。成果表明 ,数值模拟观测孔水头动态相当好地再现了物理模拟结果。论文指出了“渗流 -管流耦合模型”和“等效渗透系数”在井孔 -含水系统问题上的广泛应用前景。  相似文献   

地铁隧道开挖引起地表塌陷分析   总被引：6，自引：1，他引：6  

黄俊  张顶立  虞辰杰 《中国地质灾害与防治学报》2004,15(1):65-69

深圳富水软弱地层地铁隧道开挖中出现的工作面失稳及由此引起的地表塌陷是地铁安全施工中极其重要的方面，对施工安全、进度都有较大影响，同时也对整个工程造成巨大的经济损失。通过对深圳地铁Ⅰ期工程土建施工中全线部分暗挖标段出现的工作面失稳、地表塌陷工程实践和现场监测结果分析，特别着重对连续2次出现地表塌陷的3A标暗挖隧道研究，从隧道上覆地层物理力学性质参数、地层变形监测分析及施工工艺原因3方面阐述了地表塌陷的原因。明确提出剪切破坏线和失水空洞区的概念，确定出引发地表塌陷的主导因素为施工工艺原因。建议针对该类地层条件，应做好超前地质预报．适当调整预加固参数．加强隧道结构和地表的动态变形监测，施工技术人员做到准确了解施工现场动态，及时调整施工工艺参数，以保证隧道的安全施工。分析结果对深圳地铁Ⅱ期工程施工及类似地层条件地下工程施工提供科学预测、预防地表塌陷的方法和技术措施，达到地铁隧道施工中经济效益与安全施工的统一。  相似文献   

管井降水技术在多种含水介质基坑工程中的应用          下载免费PDF全文

曹凤学  原波  杨冬  何世鸣 《探矿工程》2004,31(8):8-11

结合蚌埠城市中心广场会展中心工程，介绍了管井降水技术在多种含水介质的复杂地质环境下的应用。  相似文献   

温州世贸中心大厦超深大直径钻孔灌注桩施工技术          下载免费PDF全文

徐辉雄  张涛  晏军  杨建林  鄢泰宁  蒋国盛 《探矿工程》2004,31(9):35-37

介绍了超深大直径钻孔灌注桩在温州世贸中心大厦桩基工程中的应用情况，对其施工中出现的主要问题进行了分析和处理，并提出了解决措施。  相似文献   

Channel adjustments of the lower Trinity River,Texas, downstream of Livingston Dam     

Jonathan D. Phillips  Michael C. Slattery  Zachary A. Musselman 《地球表面变化过程与地形》2005,30(11):1419-1439

Channel cross‐sectional changes since construction of Livingston Dam and Lake Livingston in 1968 were studied in the lower Trinity River, Texas, to test theoretical models of channel adjustment, and to determine controls on the spatial extent of channel response. High and average flows were not significantly modified by the dam, but sediment transport is greatly reduced. The study is treated as an opportunistic experiment to examine the effects of a reduction in sediment supply when discharge regime is unchanged. Channel scour is evident for about 60 km downstream, and the general phenomena of incision, widening, coarsening of channel sediment and a decrease in channel slope are successfully predicted, in a qualitative sense, by standard models of channel response. However, there is no consistent channel response within this reach, as various qualitatively different combinations of increases, decreases or no change in width, depth, slope and roughness occur. These multiple modes of adjustment are predicted by the unstable hydraulic geometry model. Between about 60 km and the Trinity delta 175 km downstream of the dam, no morphological response to the dam is observed. Rather than a diminution of the dam's effects on fluvial processes, this is due to a fundamental change in controls of the fluvial system. The downstream end of the scour zone corresponds to the upstream extent of channel response to Holocene sea level rise. Beyond 60 km downstream, the Trinity River is characterized by extensive sediment storage and reduced conveyance capacity, so that even after dam construction sediment supply still exceeds transport capacity. The channel bed of much of this reach is near or below sea level, so that sea level rise and backwater effects from the estuary are more important controls on the fluvial system than upstream inputs. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

Channel geometry of mountain streams in New Zealand     

Ellen E. Wohl  Andrew Wilcox 《Journal of Hydrology》2005,300(1-4):252-266

A dataset of 21 study reaches in the Porter and Kowai rivers (eastern side of the South Island), and 13 study reaches in Camp Creek and adjacent catchments (western side of the South Island) was used to examine downstream hydraulic geometry of mountain streams in New Zealand. Streams in the eastern and western regions both exhibit well-developed downstream hydraulic geometry, as indicated by strong correlations between channel top width, bankfull depth, mean velocity, and bankfull discharge. Exponents for the hydraulic geometry relations are similar to average values for rivers worldwide. Factors such as colluvial sediment input to the channels, colluvial processes along the channels, tectonic uplift, and discontinuous bedrock exposure along the channels might be expected to complicate adjustment of channel geometry to downstream increases in discharge. The presence of well-developed downstream hydraulic geometry relations despite these complicating factors is interpreted to indicate that the ratio of hydraulic driving forces to substrate resisting forces is sufficiently large to permit channel adjustment to relatively frequent discharges.  相似文献   

岩土钻掘设备的液压步履机构          下载免费PDF全文

王世玉  薛军 《探矿工程》2005,32(6):41-43

因液压步履移位最方便，辅助时间短，换向灵活，移位对孔准确，大型岩土钻掘设备施工的群孔现场实现近距离的自行迁移多采用液压步履机构。详细叙述了双向移动和单向移动加转向步履机构的结构和特点。  相似文献   

The effect of conservation practices in sloped croplands on soil hydraulic properties and root‐zone moisture dynamics          下载免费PDF全文

Lirong Lin  Jiazhou Chen 《水文研究》2015,29(9):2079-2088

Rain‐induced erosion and short‐term drought are the two factors that limit the productivity of croplands in the red soil region of subtropical China. The objective of this study was to estimate the effects of conservation practices on hydraulic properties and root‐zone water dynamics of the soil. A 3‐year experiment was performed on a slope at Xianning. Four treatments were evaluated for their ability to reduce soil erosion and improve soil water conditions. Compared with no practices (CK) and living grass strips (GS), the application of polyacrylamide (PAM) significantly reduced soil crust formation during intense rainfall, whereas rice straw mulching (SM) completely abolished soil crust formation. The SM and PAM treatments improved soil water‐stable aggregates, with a redistribution of micro‐aggregates into macro‐aggregates. PAM and SM significantly increased the soil water‐holding capacity. These practices mitigated the degradation of the soil saturated hydraulic conductivity (Ks) during intense rainfalls. These methods increased soil water storage but with limited effects during heavy rainfalls in the wet period. In contrast, during the dry period, SM had the highest soil water storage, followed by PAM and CK. Grass strips had the lowest soil water storage because of the water uptake during the vigorous grass growth. A slight decline in the soil moisture resulted in a significant decrease in the unsaturated hydraulic conductivity (Ku) of the topsoil. Therefore, the hydraulic conductivity in the field is governed by soil moisture, and the remaining soil moisture is more important than improving soil properties to resist short‐term droughts. As a result, SM is the most effective management practice when compared with PAM and GS, although they all protect the soil hydraulic properties during wet periods. These results suggest that mulching is the best strategy for water management in erosion‐threatened and drought‐threatened red soils. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Synthesis of soil‐hydraulic properties and infiltration timescales in wildfire‐affected soils          下载免费PDF全文

Brian A. Ebel  John A. Moody 《水文研究》2017,31(2):324-340

We collected soil‐hydraulic property data from the literature for wildfire‐affected soils, ash, and unburned soils. These data were used to calculate metrics and timescales of hydrologic response related to infiltration and surface runoff generation. Sorptivity (S) and wetting front potential (Ψ_f) were significantly different (lower) in burned soils compared with unburned soils, whereas field‐saturated hydraulic conductivity (K_fs) was not significantly different. The magnitude and duration of the influence of capillarity during infiltration was greatly reduced in burned soils, causing faster ponding times in response to rainfall. Ash had large values of S and K_fs but moderate values of Ψ_f, compared with unburned and burned soils, indicating ash has long ponding times in response to rainfall. The ratio of S²/K_fs was nearly constant (~100 mm) for unburned soils but more variable in burned soils, suggesting that unburned soils have a balance between gravity and capillarity contributions to infiltration that may depend on soil organic matter, whereas in burned soils the gravity contribution to infiltration is greater. Changes in S and K_fs in burned soils act synergistically to reduce infiltration and accelerate and amplify surface runoff generation. Synthesis of these findings identifies three key areas for future research. First, short timescales of capillary influences on infiltration indicate the need for better measurements of infiltration at times less than 1 min to accurately characterize S in burned soils. Second, using parameter values, such as Ψ_f, from unburned areas could produce substantial errors in hydrologic modeling when used without adjustment for wildfire effects, causing parameter compensation and resulting underestimation of K_fs. Third, more thorough measurement campaigns that capture soil‐structural changes, organic matter impacts, quantitative water repellency trends, and soil‐water content along with soil‐hydraulic properties could drive the development of better techniques for numerically simulating infiltration in burned areas.  相似文献   

A hydraulic invariance‐based methodology for the implementation of storm‐water release restrictions in urban land use master plans          下载免费PDF全文

Viviana Pappalardo  Alberto Campisano  Francesco Martinico  Carlo Modica  Luca Barbarossa 《水文研究》2017,31(23):4046-4055

A hydraulic invariance (HI)‐based methodology was developed as a tool to support implementation of storm flow control measures into land use master plans (LUMPs) for urban catchments. The methodology is based on the use of simple hydrologic analysis to compare predevelopment and postdevelopment catchment flow release scenarios. Differently from previous literature examples, for which the parcel scale is usually considered for the analysis, HI was pursued assuming the LUMP areas of transformation as the basic units for assigning storm water control measures in the form of flow release restrictions. The methodology was applied to a case study catchment in the southern part of the City of Catania (Italy), for which the LUMP re‐design has been recently proposed. Simulations were run based on the use of the EPA‐Storm Water Management Model and allowed deriving flow release restrictions in order to achieve HI at the subcatchment level for design events of different return period.  相似文献