海底油气集输管网可靠性评估   总被引：1，自引：0，他引：1  

刘震  潘斌 《海洋工程》2003,21(4):104-109114

对海底油气集输管网进行了可靠性评估，提出了一种适用于树状海底油气集输管网可靠性评价的方法，将流可靠度和单元重要度的概念引入到海底油气集输管网可靠性的分析中，该方法能够有效地评价海底油气集输管网的可靠性。  相似文献   

A fuzzy approach to the lectotype optimization of offshore platforms   总被引：1，自引：0，他引：1  

S. Chen  G. Fu   《Ocean Engineering》2003,30(7):877-891

Lectotype optimization of offshore platforms is of particular importance in the concept design process. Lectotype optimization involves multiple objectives with uncertainty and so is a problem of multiple attribute decision making. To date, there have been few published works on this topic in the context of offshore engineering. This paper develops a framework and methodology for evaluation of offshore platform alternatives, where a fuzzy optimum model is proposed to integrate the influence of each objective in the criteria set, and a new weight-assessing method is developed to mimic the decision maker’s experience and preference based on complementary pairwise comparisons. A case study shows that the new framework and methodology is scientific, reasonable and easy to use in practice.  相似文献   

可靠性约束下的海底油气集输管网系统优化   总被引：1，自引：0，他引：1  

刘震  潘斌 《海洋工程》2003,21(2):26-31

在管网系统满足一定可靠度的基础上，以费用最小为优化目标，对系统进行了优化，求出了满足一定可靠度指标的费用最小的管网布置方案。对树状网络可靠性进行了评估，提出了一个0-l规划模型，并运用图论和网络理论将管网系统的优化问题转变为求可靠度至少为α的网络固的最小生成树问题。  相似文献   

海洋平台结构形状与拓扑优化设计     

马红艳  刘书田等 《海洋工程》2001,19(4):21-28

以实际环境荷载作用下的实际海洋导管架平台结构为对象，研究了海洋平台结构在风，流，海冰等多荷载模式和多荷载工况下的优化设计的理论方法和应用技术，建立了结构尺寸优化，形状优化和拓扑优化问题的统一模型。计算结果反映出形状优化比尺寸优化所得设计更优，而拓扑优化的设计效果最好。不同的荷载工况对应的最优拓扑形式不同，因此在实际设计中应考虑实际的荷载工况，选取不同的拓扑形式。  相似文献   

A Unified Variational Principle of Fluid Mechanics and Application on Solitary Subdomain or Point   总被引：1，自引：0，他引：1  

Fu Yuhua Senior Engineer  China Offshore Oil Engineering Corp.  P. O. Box  Beijing 《中国海洋工程》1994,(2)

-According to basic equations of fluid mechanics, this paper presents a unified variational principle of fluid mechanics (UVPFM) by using the optimization method of weighted residuals (OMWR). The advantages are as follows, the establishment of the functional and the variational principle is easy, it can change various problems of fluid mechanics derived by basic equations into a unified optimization problem, and the solution is the optimum one in some sense. According to the OMWR for the solitary subdomain, this paper uses UVPFM onto any solitary subdomain and gives the solution of the hydrodynamics equation which is suitable only for that solitary subdomain. According to the OMWR for solitary point, this paper uses UVPFM to any solitary point and gives the solution of the hydrodynamics equation (point solution) which is suitable only for that solitary point. As the solution for the solitary subdomain or solitary point is developed independently, the compatibility with other subdomain or other points, do  相似文献   

水成沉积与风成沉积及古土壤的磁组构特征   总被引：14，自引：2，他引：14  

张家强  李从先  丛友滋 《海洋地质与第四纪地质》1999,19(2):85-94

晚第四纪水成沉积、风成沉积、古土壤等的磁组构研究表明,不同成因的沉积物具有明显不同的磁组构特征。一般地,水成沉积的体积磁化率Ｋ受物源和水动力因素控制,Ｐ和Ｆ均＞１．０２,ｑ＜０．５;风成沉积的Ｋ受物源控制,内陆黄土的Ｋ明显高于沿海黄土及海岸风沙Ｋ,Ｐ和Ｆ均＜１．０２,ｑ的平均值＞０．５５;古土壤的Ｋ受母质沉积类型和成土环境的氧化还原条件控制,内陆古土壤的Ｋ偏高,沿海古土壤的Ｋ偏低,内陆古土壤的Ｋ远高于沿海古土壤的Ｋ,Ｐ和Ｆ均＜１．０２,ｑ的平均值在０．５左右。运用典型沉积的磁组构特征对比分析未知沉积物,可以得到未知沉积物的物源、沉积过程和环境信息。  相似文献   

深水网箱投饵机设计与试验研究   总被引：15，自引：0，他引：15  

宋协法  路士森 《中国海洋大学学报(自然科学版)》2006,36(3):405-409

根据网箱养殖的特点,结合网箱养殖的经验,设计了1种深水网箱投饵机,并进行了相应的试验,测定了不同情况下产生的真空度以及在冲饵管和吸饵管不同开度时的下料时间。此投饵机使用水力环流供饵、水力抽负吸饵、水动力投饵,充分利用了丰富的海水资源,用汽油机水泵作动力,利用管道将饵料抛向网箱,可向多个、距离不同的网箱供饵。作为1种新的投饵机具,可用于网箱养鱼和池塘养鱼的投饵。  相似文献   

渤海南部表层沉积的相特征   总被引：1，自引：0，他引：1  

王琦  赵其渊  杨作升  周莉  沈渭铨  周伟  李平 《中国海洋大学学报(自然科学版)》1989,(1)

通过海上调查及实验室分析,查明渤海南部表层沉积物在结构类型、矿物组合、生物组分及沉积构造等相特征方面具有明显的分区性。渤海南部存在五种沉积相:黄河水下三角洲相、陆架盆地相、海湾相、潮流浅滩相及古滨岸相。黄河水下三角洲相从河口延至水深15—20米处,沉积速率很高,沉积物富含碎屑云母及CaCo_3。陆架盆地相的沉积为粉砂质粘土,具有生物扰动构造。  相似文献   

A Note on Tsunami Bore Front     

Shigehisa Nakamura 《Marine Geodesy》2005,28(4):305-312

A note is presented on tsunami bore front. This tsunami bore front is an old dynamical problem but also a new problem to be understood. The tsunami event on 2004 December 26 has raised this is an urgent problem. The author introduces here a model in order to see a hydrodynamical specific property of the tsunami bore front. This modeling gives us a new understanding about what mechanics is for the interested tsunami bore front, especially, around a coastal zone. This work adds a new understanding about mechanics of water motions as the tsunamis generated by the earthquake undersea at a distant area from the coast. The model in this work points out a specific transitional pattern as a function of time and space of tsunami bore front. This modeling gives what is essential at considering tsunami bore front.  相似文献   

Theoretical aspects of cap-rock and fault seals for single- and two-phase hydrocarbon columns   总被引：6，自引：0，他引：6  

N.L. Watts   《Marine and Petroleum Geology》1987,4(4)

Cap-rock seals can be divided genetically into those that fail by capillary leakage (membrane seals) and those whose capillary entry pressures are so high that seal failure preferentially occurs by fracturing and/or wedging open of faults (hydraulic seals). A given membrane seal can trap a larger oil column than gas column at shallow depths, but below a critical depth (interval), gas is more easily sealed than oil. This critical depth increases with lower API gravity, lower oil GOR and overpressured conditions (for the gas phase). These observations arise from a series of modelling studies of membrane sealing and can be conveniently represented using pressure/ depth (P/D) profiles through sealed hydrocarbon columns. P/D diagrams have been applied to the more complex situation of the membrane sealing of a gas cap underlain by an oil rim; at seal capacity, such a two-phase column will be always greater than if only oil or gas occurs below the seal.These conclusions contrast with those for hydraulic seals where the seal capacity to oil always exceeds that for gas. Moreover, a trapped two-phase column, at hydraulic seal capacity will be less than the maximum-allowed oil-only column, but more than the maximum gas-only column. Unlike membrane seals, hydraulic seal capacity should be directly related to cap-rock thickness, in addition to the magnitude of the minimum effective stress in the sealing layer and the degree of overpressure development in the sequence as a whole.Fault-related seals are effectively analogous to membrane cap-rocks which have been tilted to the angle of the fault plane. Consequently, all of the above conclusions derived for membrane cap-rocks apply to both sealing faults sensu stricto (fault plane itself seals) and juxtaposition faults (hydrocarbon trapped laterally against a juxtaposed sealing unit). The maximum-allowed two-phase column trapped by a sealing fault is greater than for equivalent oil-only and gas-only columns, but less than that predicted for a horizontal membrane cap-rock under similar conditions. Where a two-phase column is present on both sides of a sealing fault (which is at two-phase seal capacity), a deeper oil/water contact (OWC) in one fault block is associated with a deeper gas/oil contact (GOC) compared with the adjacent fault block. If the fault seal is discontinuous in the gas leg, however, the deeper OWC is accompanied by a shallower GOC, whereas a break in the fault seal in the oil leg results in a common OWC in both fault blocks, even though separate GOC's exist. Schematic P/D profiles are provided for each of the above situations from which a series of fundamental equations governing single- and two-phase cap-rock and fault seal capacities can be derived. These relationships may have significant implications for exploration prospect appraisal exercises where more meaningful estimates of differential seal capacities can be made.The membrane sealing theory developed herein assumes that all reservoirs and seals are water-wet and no hydrodynamic flow exists. The conclusions on membrane seal capacity place constraints on the migration efficiency of gas along low-permeabiligy paths at depth where fracturing, wedging open of faults and/or diffusion process may be more important. Contrary to previous assertions, it is speculated that leakage of hydrocarbons through membrane seals occurs in distinct pulses such that the seal is at or near the theoretically calculated seal capacity, once this has been initially attained.Finally, the developed seal theory and P/D profile concepts are applied to a series of development geological problems including the effects of differential depletion, and degree of aquifer support, on sealing fault leakage, and the evaluation of barriers to vertical cross-flow using RFT profiles through depleted reservoirs. It is shown that imbibition processes and dynamic effects related to active cross-flow across such barriers often preclude quantitative analysis and solution of these problems for which simulation studies are usually required.  相似文献