区域矿产评价模型——以赤峰红花沟金矿为例   总被引：3，自引：1，他引：2  

娄德波  肖克炎  孙艳  雷万杉  王淼  丁建华  范华军 《吉林大学学报(地球科学版)》2008,38(4)

在矿床模型综合地质信息预测方法中,区域矿产评价模型包括远景区圈定要素组合、远景区优选要素组合、矿床数估计要素组合和资源量估算要素组合,它们成功地解决了矿产预测中的信息不对称以及知识驱动和数据驱动相结合的问题.通过对赤峰燕山期红花沟式岩浆热液型金矿资源的定位、定量预测,共圈定远景区11个,其中A类远景区4个,B类远景区3个,C类远景区4个;预测潜在矿床数8个,潜在资源量306.532 t.本区该类型金矿资源潜力巨大,具有很好的找矿远景.  相似文献   

山东玲珑金矿床成矿流体地球化学特征   总被引：3，自引：0，他引：3  

王可勇  张春燕  樊岳铭  张晓东 《吉林大学学报(地球科学版)》2008,38(2):194-201

玲珑金矿床第一成矿阶段与含金黄铁矿共生的石英中主要发育4种类型的原生流体包裹体:Ⅰ气液两相,Ⅱ含CO2三相,ⅢCO2,Ⅳ单液相包裹体。流体包裹体成分激光拉曼光谱分析及测温结果显示:①Ⅰa型包体,气液比10%~15%,均一温度为162.7~235.6℃,w(NaCl)(盐度)为4.65%~7.59%,气相平均摩尔分数为:H2O 96.48%,CO22.4%;②Ⅰb型包体,气液比30%~45%,均一温度266.9~349.2℃,w(NaCl)为10.8%~13.4%,气相平均摩尔分数为H2O 69.75%,CO224.74%;③Ⅱ型含CO2包体,CO2相所占比例为20%~90%,其均一温度为193.5~321.6℃,w(NaCl)2.9%~5.3%,CO2相中,H2O的摩尔分数为27.72%,CO2为70.6%。包裹体成分分析及测温结果综合研究认为,玲珑金矿成矿过程中存在大气降水热液与地幔来源流体的混合作用,前者与从流体中分离出的富CO2流体混合,以不同比例被捕获形成Ⅱ型包体;而与分异出CO2后的CO2不饱和地幔流体混合,被捕获形成Ⅰb型包体。两种流体混合导致的含矿热液物化条件变化对金的沉淀成矿具有重要意义。  相似文献   

氧化锰矿物的生物成因及其性质的研究进展   总被引：5，自引：0，他引：5  

刘凡  冯雄汉  陈秀华  邱国红  谭文峰  贺纪正 《地学前缘》2008,15(6):66

土壤中的氧化锰矿物是原生矿物风化和成土过程的产物,是最具反应活性的一类矿物,决定着环境中许多物质的形态、迁移和转化,在元素生物地球化学循环中起着重要的作用,其形成机制和环境效应备受关注。已有的研究表明,环境中氧化锰的形成与微生物作用紧密相关,微生物作用可使自然环境中的Mn(Ⅱ)氧化速率提高105倍。参与Mn(Ⅱ)氧化的微生物在环境中广泛存在,已知的典型锰氧化细菌分布在变形菌门、放线菌门或厚壁菌门,它们均通过胞外聚合物中的多铜氧化酶来催化氧化Mn(Ⅱ)。细菌氧化Mn(II)成Mn(Ⅳ)是酶催化的两个连续的快速单电子传递过程,Mn(Ⅲ)在溶液中以与酶结合的瞬时中间态出现。生物形成氧化锰的最初形态为层状锰矿物,与δ-MnO2或酸性水钠锰矿很类似,且结晶弱,粒径小,锰氧化度高,结构中的八面体空穴多,因而比化学形成的氧化锰具有更强的吸附、氧化等表面活性。环境中Mn(Ⅱ)微生物氧化及形成的Mn(Ⅲ)中间体与碳、氮、硫等生命元素的地球化学循环的关系令人关注。  相似文献   

大别地块东南缘逆冲滑脱构造体系及其对金矿的控制作用     

刘迅 《大地构造与成矿学》1994,18(2):127-137

大别地块自晚元古代以来主要经受了自北而南的推挤,并且发生了两次较强烈的南移运动,造成了地块前线逆冲滑脱构造体系。特别是中生代的推挤和滑移,不仅构造变形强烈,而且还伴有热事件,大别地块东南缘郯－庐断裂南延部分和广济－宿松平移－推覆型韧性剪切带均是＂热线构造＂,它们提供了深层次岩浆活动的通道。本区岩石以绿片岩－角闪岩相变质岩为主,含金背景值高,逆冲滑脱构造和韧性剪切带的活动与金元素的活化、迁移和富集创造了良好的条件。  相似文献   

稀土矿床：基本特点与全球分布规律     

毛景文  宋世伟  刘敏  孟健寅 《地质学报》2022,96(11):3675-3697

本文介绍了全球稀土资源供需历史、现状和对未来的展望。从矿床成因视角切入，将稀土矿床分为内生和外生两大类型，其中内生稀土矿床包括碳酸岩型、碱性岩型、碱性岩型- 碳酸岩型、氧化铁铜金型、热液脉型，外生稀土矿床包括风化壳离子吸附型、沉积岩型、沉积矿产(煤矿、铝土矿和沉积磷矿)伴生型、砂矿和现代海洋底部含稀土的锰结核、结壳和软泥型。归纳总结了主要类型矿床的基本特点和时空分布；认为内生稀土矿床产出于四类构造环境，包括裂谷环境、碰撞后伸展环境、大陆碰撞环境和后俯冲伸展环境；从构造演化入手，探讨了在外生与内生地质过程中稀土元素的迁移和富集规律，建立了涵盖主要矿床类型的构造- 成矿模型。  相似文献   

四川木里耳泽岩溶型金矿床形成条件和成矿机制   总被引：1，自引：0，他引：1       下载免费PDF全文

郑明华  阳正熙 《地质科学》1995,30(4):363-373

四川本里耳泽金-菱铁矿建造矿床,赋存于上二叠统海相碳酸盐岩层中,矿化受古岩溶的严格控制,组成矿石的基本矿物为菱铁矿,金不均匀地分布于菱铁矿矿体内。成矿溶液来自加热的循环地下水。成矿过程分为早阶段和中-晚阶段。成矿温度为156-210℃,成矿深度小于1km.成矿物质主要来自地层。成矿热液呈碱性和弱还原性,贫硫,含中等盐度。矿床形成时的地质构造环境较稳定。这是我国仅见的一种特殊金矿类型。  相似文献   

贵州中三叠统烂泥沟金矿有机质的初步研究   总被引：2，自引：0，他引：2       下载免费PDF全文

李忠  刘铁兵 《地质科学》1995,30(3):283-290

烂泥沟金矿是以浊积岩为容矿岩石的微细浸染型金矿。有机岩石学分析表明,矿石与围岩中干酪根类型无明显差别,同属腐泥-腐植型。与围岩相比,矿石中干酪根成熟度(R₀=2.74%-3.06%)和含金性(6.15-24.8μg/g)均较高;干酪根总含金量在全岩中所占的比例是围岩高于矿石。氯仿沥青“A”的检测说明,矿石样品中可溶性有机质形成于强还原和高盐度环境,沥青质和含硫有机化合物发育。研究认为,干酪根含金性与碳的活化有关;不饱和的有机基因对金的动一定转换可能具有重要意义。  相似文献   

矿物标型六性及其在胶东金矿中的应用   总被引：2，自引：0，他引：2  

陈光远  孙岱生 《吉林地质》1990,9(3):1-8

目前矿物标型研究和应用已进入一个新的阶段。作者从哲学的高度,把国内外矿物标型特征的分散研究加以集中概括和总结,提出了“矿物标型六性”的普遍规律,即普遍性、特殊性、变化性、相应性、继承性和分带性,对矿物标型特征研究具重要的指导意义。这些规律在胶东金矿中得到广泛应用,并已取得良好效果。  相似文献   

An electrochemical study of pyrite oxidation in the presence of carbon coatings in cyanide medium     

H. Tan  D. Feng  J.S.J. van Deventer  G.C. Lukey 《International Journal of Mineral Processing》2006,80(2-4):153-168

The anodic and cathodic behaviour of pyrite with clay and different carbon coatings of activated carbon, graphite and carbonaceous matter in cyanide medium was investigated using the potentiodynamic method. The presence of clay coating did not change the polarisation curve appearance for either the anodic oxidation of pyrite or the cathodic reduction of oxygen or the potential of the current plateau, but only decreased the plateau current especially at a higher coating thickness. The presence of the carbon coatings marginally shifted the rest potential for pyrite to a more anodic position and slightly changed the polarisation curve appearance for pyrite oxidation. The current density for pyrite oxidation largely increased in the presence of the carbon coatings, the potential at the plateau shifted to more cathodic positions, and the plateau width became smaller. These effects became more noticeable at a higher coating thickness. The activated carbon, graphite and carbonaceous matter coatings performed similarly in affecting pyrite oxidation at a similar thickness. The carbon coatings significantly increased the limiting current densities for oxygen reduction on pyrite, and the limiting current plateau became steeper at a higher coating thickness. The carbon coatings increased the limiting current density for oxygen reduction to a similar extent at a low coating thickness, but increased to varied extents at a higher coating thickness. The carbon coatings also greatly increased the cathodic current density for gold reduction on pyrite. The enhancement of pyrite oxidation and oxygen or gold reduction on pyrite by the carbon coatings was likely attributed to the electrochemical interaction between pyrite and the carbon materials with electron-rich surfaces and high conductivity. The presence of the carbon coatings significantly increased the oxidation of pyrite in aerated cyanide solutions and the preg-robbing of pyrite especially at a higher coating thickness.  相似文献   

The Ore-forming Fluid of the Gold Deposits of Muru Gold Belt in Eastern Shandong, China - a Case Study of Denggezhuang Gold Deposit   总被引：1，自引：0，他引：1  

Qingdong Zeng    Jianming Liu    Hongtao Liu    Ping Shen  Lianchang Zhang 《Resource Geology》2006,56(4):375-384

Abstract. Denggezhuang gold deposit is an epithermal gold‐quartz vein deposit in northern Muru gold belt, eastern Shandong, China. The deposit occurs in the NNE‐striking faults within the Mesozoic granite. The deposit consists of four major veins with a general NNE‐strike. Based on crosscutting relationships and mineral parageneses, the veins appear to have been formed during the same mineralization epochs, and are further divided into three stages: (1) massive barren quartz veins; (2) quartz‐sulfides veins; (3) late, pure quartz or calcite veinlets. Most gold mineralization is associated with the second stage. The early stage is characterized by quartz, and small amounts of ore minerals (pyrite), the second stage is characterized by large amounts of ore minerals. Fluid inclusions in vein quartz contain C‐H‐O fluids of variable compositions. Three main types of fluid inclusions are recognized at room temperature: type I, two‐phase, aqueous vapor and an aqueous liquid phase (L+V); type II, aqueous‐carbonic inclusions, a CC₂‐liquid with/without vapor and aqueous liquid (LCO₂+VCC₂+Laq.); type III, mono‐phase aqueous liquid (Laq.). Data from fluid inclusion distribution, microthermometry, and gas analysis indicate that fluids associated with Au mineralized quartz veins (stage 2) have moderate salinity ranging from 1.91 to 16.43 wt% NaCl equivalent (modeled salinity around 8–10 wt% NaCl equiv.). These veins formatted at temperatures from 80d? to 280d?C. Fluids associated with barren quartz veins (stage 3) have a low salinity of about 1.91 to 2.57 wt% NaCl equivalent and lower temperature. There is evidence of fluid immiscibility and boiling in ore‐forming stages. Stable isotope analyses of quartz indicate that the veins were deposited by waters with δ^O and δD values ranging from those of magmatic water to typical meteoric water. The gold metallogenesis of Muru gold belt has no relationship with the granite, and formed during the late stage of the crust thinning of North China.  相似文献