非线性波消波及波场分布研究   总被引：1，自引：1，他引：0  

王巧莎  李明海 《海洋科学》2018,42(6):30-38

本文基于雷诺平均N-S方程,并结合RNG k-e方程建立了粘性数值波浪水槽,对不同波陡、不同相对水深、不同相对波高的非线性规则波的阻尼消波问题和波场分布进行研究。文中提出了两种描述消波区内部阻尼变化的阻尼函数,分别适用于小波陡情形和高波陡情形。研究结果表明,小波陡组消波区可设为一个波长,阻尼系数取10~4～10~5即可满足消波要求,计算结果与实验结果及造波理论吻合良好;高波陡组消波区可设为两个波长,阻尼系数取10~4～10~5亦可满足消波要求,计算结果与实验结果吻合良好。此外,当波陡较小时,波场内反射情况的小幅改变即可对整个波场造成影响,特别是当水深较浅时这种影响极为明显,需谨慎考虑。当波陡较大时,水波能量较高,整个波场沿水波传播方向可观测到明显的衰减现象,在具体试验中需进行考虑。  相似文献   

Explicit stress–strain equations for modeling frictional materials     

Kenneth J. Xu  Martin D. Liu  Buddhima Indraratna 《Marine Georesources & Geotechnology》2018,36(6):722-734

In this paper, a comprehensive study on simulating the shearing behavior of frictional materials is performed. A set of two explicit equations, describing the relationship among the shear stress ratio and the distortional strain and the volumetric strain, are formulated independently. The equations contain three stress parameters and three strain parameters and another parameter representing the nonuniformity of stress and strain during softening. All the parameters have clear physical significance and can be determined experimentally. It is demonstrated that the proposed equations have the capacity of simulating the complicated shearing behavior of many types of frictional materials including geomaterials. The proposed equations are used to simulate the stress–strain behavior for 27 frictional materials with 98 tests. These materials include soft and stiff clays in both reconstituted and structured states, silicon sands and calcareous sands, silts, compacted fill materials, volcanic soils, decomposed granite soils, cemented soils (both artificially and naturally cemented), partially saturated soils, ballast, rocks, reinforced soils, tire chips, sugar, wheat, and rapeseed. It has been demonstrated that the proposed explicit constitutive equations have the capacity to capture accurately the shearing behavior of frictional materials both qualitatively and quantitatively. A study on model parameters has been performed.  相似文献   

含部分晶须的钛酸锂的制备及其性能表征     

邓昭平  倪师军  李思平  夏新蕊  王鹏威 《矿物岩石》2006,26(4):98-100

L i4T i5O12是一种循环性能好、有很好的充放电平台、理论比容量较大、不与电解液反应的新型负极材料,研究探索以偏钛酸和碳酸锂为主要原料制备含部分晶须的尖晶石型晶型L i4T i5O12的一种方法。通过此工艺在1 000℃煅烧8 h后在样品中约20%的晶须出现,晶须的直径≤0.5μm,晶须的长度约为7μm。  相似文献   

基于粒径分维值检验的松散介质渗透系数空间估值——以河北平原为例     

罗晓娟  徐恒力  叶含春 《地质科技情报》2007,26(1):87-90

为了克服松散含水介质非均质性各向异性对介质渗透系数的求取所带来的困难,以水动力条件为线索,利用互相关法寻找同一时代地层及同一时代地表水的主、次流方向.在主流方向上,建立了石家庄-束鹿-衡水段介质颗粒粒径随距离递变的数学模型,并以此为基础推求无钻孔地段的粒径.同时,运用分形理论,计算了中、上更新统地层主流方向平均粒径空间分布的分维值,并将其作为检验粒径估值正确与否的判据.通过不同岩性的渗透系数-深度模型,实现了用平均粒径预测渗透系数的全过程.  相似文献   

Macroscopic criteria for Green type porous materials with spheroidal voids: application to double porous materials          下载免费PDF全文

W. Q. Shen  J.‐F. Shao  D. Kondo 《国际地质力学数值与分析法杂志》2017,41(13):1453-1473

Combined effects of matrix plastic compressibility and void shape are investigated for ductile porous materials. To this end, a spheroidal volume containing a confocal spheroidal (prolate or oblate) void subjected to uniform strain rate boundary conditions has been first studied. A Green type matrix is chosen as a prototype for investigating effects of plastic compressibility. This is carried out by using a kinematics limit analysis theory from which a closed‐form expression of the macroscopic criterion is established for the considered class of materials. These results are then extended to ductile porous materials made up of a green matrix containing randomly oriented spheroidal voids. In the framework of a two‐step homogenization procedure, the obtained results are implemented to describe the macroscopic behavior of double porous materials involving spherical voids at the microscale and randomly oriented and distributed spheroidal voids at the mesoscale. For validation purpose, the new derived criteria are assessed and validated by comparing their predictions to available upper bounds and numerical data from literature. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

One‐dimensional dynamics of saturated incompressible porous media: analytical solutions and influence of inertia terms          下载免费PDF全文

Yunpeng Zhang  Dorival M. Pedroso  Wolfgang Ehlers 《国际地质力学数值与分析法杂志》2016,40(18):2489-2513

The complexity of formulations for the hydromechanical coupled mechanics of porous media is typically minimised by simplifying assumptions such as neglecting the effect of inertia terms. For example, three formulations commonly employed to model practical problems are classified as fully dynamic, simplified dynamic and quasi‐static. Thus, depending on the porous media conditions, each formulation will have advantages and limitations. This paper presents a comprehensive analysis of these limitations when solving one‐dimensional fully saturated porous media problems in addition to a new solution that considers a more general loading situation. A phase diagram is developed to assist on the selection of which formulation is more appropriate and convenient regarding particular cases of porosity and hydraulic conductivity values. Non‐dimensional formulations are proposed to achieve this goal. Results using the analytical solutions are compared against numerical values obtained with the finite element method, and the effect of porosity is investigated. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

Engineering characteristics and uses of duricrusts in Australia     

G. H. McNally 《Australian Journal of Earth Sciences》2013,60(6):535-547

The uses and shortcomings of duricrusts (ferricrete, calcrete and silcrete) in engineering construction (as used for road‐base, aggregate, foundation materials and aquifers) are reviewed. Australian production of these materials represents about one‐third of all unprocessed road‐base and they are especially important as pavement courses for lightly trafficked, low‐cost rural and outback roads. However, duricrusts are regarded as marginal materials at best because of their typically poor grading, particle unsoundness, high fines plasticity, and absorption of water and bitumen. These materials are used because they are available locally in areas that are otherwise lacking in hard rock materials, such as deeply weathered and sedimentary rock terrains. The weathering profiles of which they form part are characterized by high permeability (despite being clay‐rich), variable cementation, low compressibility and a tendency to become weaker with depth. Although the more indurated layers are unrippable, they are also difficult to blast. Pedogenic (nodular) duricrusts were formerly sought for natural road‐base, because they occur widely and require only rudimentary processing. However, well‐cemented groundwater (vadose) duricrusts are now the preferred deposits, even though they require crushing and screening. Ferricrete is the most widely exploited of the duricrusts for engineering purposes, especially in northern and southwestern Australia, although calcrete is important in South Australia and in the Murray Basin. Silcrete is only a minor source of aggregate and road‐base, mainly in western Queensland.  相似文献   

Numerical analysis of frost effects in porous media. Benefits and limits of the finite element poroelasticity formulation     

Stéphane Multon  Alain Sellier  Bernard Perrin 《国际地质力学数值与分析法杂志》2012,36(4):438-458

The aim of this paper is to analyse the performance of a finite element formulation usable for predicting the mechanical consequences of frost effects on porous media. It considers the characteristics of porous media and how the frost action can be assessed. The problem is then separated into two parts: thermal and poromechanical calculations. The constitutive equations developed in the framework of poromechanics are presented and the implementation in a usual finite element poroelasticity formulation based on Zuber's method is adopted. An analysis of the time‐step influence on the convergence rate is given and leads us to propose a simple method in order to obtain objectivity of the finite element response and avoid over‐long calculations. Frost effect simulations are carried out on real porous media (two fired clays) as a case study. Although the experimental behaviour of the porous media subjected to frost action is in accordance with some observations, the calculated strains appear to be overestimated compared with measurements. The problem could be largely attributable to the difficulty of assessing permeability evolution during frost development. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

Micromechanical viscoelasto‐plastic models and finite element implementation for rate‐independent and rate‐dependent permanent deformation of stone‐based materials     

Qingli Dai 《国际地质力学数值与分析法杂志》2010,34(13):1321-1345

This paper presents parallel and serial viscoelasto‐plastic models to simulate the rate‐independent and the rate‐dependent permanent deformation of stone‐based materials, respectively. The generalized Maxwell viscoelastic and Chaboche's plastic models were employed to formulate the proposed parallel and serial viscoelasto‐plastic constitutive laws. The finite element (FE) implementation of the parallel model used a displacement‐based incremental formulation for the viscoelastic part and an elastic predictor—plastic corrector scheme for the elastoplastic component. The FE framework of the serial viscoelasto‐plastic model employed a viscoelastic predictor—plastic corrector algorithm. The stone‐based materials are consisted of irregular aggregates, matrix and air voids. This study used asphalt mixtures as an example. A digital sample was generated with imaging analysis from an optically scanned surface image of an asphalt mixture specimen. The modeling scheme employed continuum elements to mesh the effective matrix, and rigid bodies for aggregates. The ABAQUS user material subroutines defined with the proposed viscoelasto‐plastic matrix models were employed. The micromechanical FE simulations were conducted on the digital mixture sample with the viscoelasto‐plastic matrix models. The simulation results showed that the serial viscoelasto‐plastic matrix model generated more permanent deformation than the parallel one by using the identical material parameters and displacement loadings. The effect of loading rates on the material viscoelastic and viscoelasto‐plastic mixture behaviors was investigated. Permanent deformations under cyclic loadings were determined with FE simulations. The comparison studies showed that the simulation results correctly predicted the rate‐independent and rate‐dependent viscoelasto‐plastic constitutive properties of the proposed matrix models. Overall, these studies indicated that the developed micromechanical FE models have the abilities to predict the global viscoelasto‐plastic behaviors of the stone‐based materials. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

Dynamics of unsaturated poroelastic solids at finite strain     

Ryosuke Uzuoka  Ronaldo I. Borja 《国际地质力学数值与分析法杂志》2012,36(13):1535-1573

We derive the governing equations for the dynamic response of unsaturated poroelastic solids at finite strain. We obtain simplified governing equations from the complete coupled formulation by neglecting the material time derivative of the relative velocities and the advection terms of the pore fluids relative to the solid skeleton, leading to a so‐called u^s ? p^w ? p^a formulation. We impose the weak forms of the momentum and mass balance equations at the current configuration and implement the framework numerically using a mixed finite element formulation. We verify the proposed method through comparison with analytical solutions and experiments of quasi‐static processes. We use a neo‐Hookean hyperelastic constitutive model for the solid matrix and demonstrate, through numerical examples, the impact of large deformation on the dynamic response of unsaturated poroelastic solids under a variety of loading conditions. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献