对应分析的原理和数据预处理     

张克权  郭仁忠 《武汉大学学报(信息科学版)》1986,(4)

本文对多元统计分析中目前应用的对应分析方法的原理公式作了重新推导,提出 z_(ij)=(p_(ij)/p_(i.)p_(.j))-1的数据变换公式;并对原始数据作了严格的预处理。最后应用一个实例计算和作图,与简单的因子分析及原用的对应分析成果作了比较。理论和算例都说明本文介绍的对应分析的数据预处理和分析方法较原用方法原理上更正确,应用上更合理,并克服了变量中对各种数据原有的局限性。  相似文献   

广西五圩矿田多金属矿床的成矿特征及物质来源   总被引：5，自引：0，他引：5  

蔡建明  徐新煌  刘文周 《矿物岩石》1995,(3)

五圩矿田各多金属矿床均为中—低温热液充填型脉状矿床。研究结果表明，成矿流体是一种低盐度富含ＣＯ＿２的中－低温热液，其物质来源并非单一。其中，热液主要来自动热变质水，有部分岩浆热液掺合；主要成矿元素（Ｐｂ，Ｚｎ，Ｓｂ，Ａｓ等）由赋矿地层提供；硫具混源特征。成矿时存在一个统一热力场，而且成矿作用以“脉动式”充填方式为主，因而，矿田内围绕矿化中心（热源），出现明显的矿床水平分带现象和多阶段矿化特点。  相似文献   

构造活动地区工程构造稳定性研究     

刘行松  钟嘉猷 《工程地质学报》1995,3(1):1-9

拟建的新疆喀拉喀什河乌鲁瓦提水电站位于现代地壳运动十分活跃的区域。野外证据显示出，坝区的Ｆ＿（１２）断层新活动延续到晚更新世，电站附近的石门北断层在第四纪有活动。对采自坝区及附近几条断层的断层物质样品进行了变形显微构造、石英颗粒表面形貌和微结构类型、ＴＬ年龄的分析测定，结果表明，Ｆ＿（１２）最新活动的上限时间不晚于３万年，Ｆ＿（３０）和石门断层的活动持续到晚更新世，石门北断层最新的活动的上限时间约２万年。根据区域断裂的分布和应力场的情况，进行了构造模拟实验，预测出工程区在区域应力场的继续作用下，应力集中在远离坝址的部位，坝址附近不会出现新的应力集中点。总体看，所选坝址是地壳活动区中相对较稳定的地段。  相似文献   

Long-term erosion on granitic roadcuts based on exposed tree roots     

Walter F. Megahan  Kathleen A. Seyedbagheri  Patrick C. Dodson 《地球表面变化过程与地形》1983,8(1):19-28

Exposed roots were used to estimate soil and bedrock erosion on the cut slopes of a 45-year-old road constructed in granitic soils of the Idaho Batholith. The original roadcut surface was defined by projecting a straight line from the toe of the cut past the end of the exposed root to the intersection of a straight line projected along the surface of the hillslope. A cross-sectioning technique was then used to determine erosion to the present roadcut surface. A total of 41 exposed root sites were used to estimate erosion on a 1350 m-long section of road. Average erosion was 1·0 and 1·1 cm/year for soil and bedrock respectively. Buttressing by tree roots caused lower erosion rates for soil as compared to bedrock. Both soil and bedrock erosion rates showed statistically significant correlations with the gradients of the original cut slope. The bedrock erosion data provide a reasonable estimate of the disintegration rate of exposed granitic bedrock exhibiting the weathering and fracturing properties common to this area. The road is located in a study watershed where long-term sediment yield data are available. Sediment data from adjacent study watersheds with no roads were compared to sediment data from the roaded watershed to estimate the long-term increase in sediment yield caused by the road. The increase amounts to about 2·4 m³/year. This figure, compared to the average annual on-site road erosion, provides an erosion to sediment delivery ratio of less than 10 per cent. Based on study results, road construction and maintenance practices are suggested for helping reduce roadcut erosion.  相似文献   

Digital Image Based Approach for Three-Dimensional Mechanical Analysis of Heterogeneous Rocks   总被引：2，自引：0，他引：2  

S. Chen  Z. Q. Yue  L. G. Tham 《Rock Mechanics and Rock Engineering》2007,40(2):145-168

Summary This paper presents a digital image based approach for three-dimensional (3-D) numerical simulation and failure analysis of rocks by taking into account the actual 3-D heterogeneity. Digital image techniques are adopted to extract two-dimensional (2-D) material heterogeneity from material surface images. The 2-D image mesostructures are further extrapolated to 3-D cuboid mesostructures by assuming the material surface as a representation of the inner material heterogeneity within a very small depth. The iterative milling and scanning system is set up to generate the 3-D rock mesostructures. A Hong Kong granite specimen is used as an example to demonstrate the procedure of 3-D mesostructure establishment. The mechanical responses and failure process under the conventional Brazilian tensile test condition are examined through numerical analyses. The stress distribution, crack propagation process and failure model of heterogeneous material cases are simulated with a finite difference software. The numerical results indicate that material heterogeneity plays an important role in determining the failure behavior of rocks under external loading.  相似文献   

193nmLA-ICPMS对国际地质标准参考物质中42种主量和微量元素的分析   总被引：31，自引：16，他引：31  

柳小明  高山  袁洪林  Bodo HATTENDORF  DetlefGNTHER  陈亮  胡圣红 《岩石学报》2002,18(3):408-418

本文采用配备有 193nm Ar F准分子 (excimer)激光器的 Geo L as2 0 0 M剥蚀系统和 Elan6 10 0 DRC ICP- MS对 4个美国地质调查所 (USGS)玻璃标准参考物质以及 3个美国国家标准技术研究院 (NIST)人工合成硅酸盐玻璃标准参考物质中几乎覆盖整个质量数范围 (从 7L i到 2 38U)的 38个微量和 4个主量 (Na、Mg、Ti和 Mn)元素进行了分析。分析结果表明 ,无论是对 USGS还是 NIST玻璃 ,元素分析的相对标准偏差 RSDs和分析值与参考值之间的相对偏差 (RDs)一般优于 10 % ,RSD和RD较大的元素主要出现在含量很低或不均匀样品中。稀土元素的 RSD显示 ,除 AGV- 2 G可能存在不均匀现象外 ,其它所测样品在 6 0 μm尺度上 ,元素分布是均匀的。本研究证明 ,由于 ICP- MS具有 10 8cps(每秒计数 )的动态线性范围 ,本实验室的L A- ICPMS系统可定量分析含量在百分之几的主量元素及微量元素。分析精密度和准确度可与常规溶液雾化进样 ICP- MS方法相媲美  相似文献   

对山西应县木塔采用纳米复合纤维加固的建议   总被引：9，自引：0，他引：9  

李大华  徐扬  郑鹄 《山西地震》2001,(4):24-25

山西应县木塔是古人留给我们的稀世珍宝，如何妥善地保护好这一珍贵的遗产，使之在加固时尽量保持原有的风貌，是一项复杂而艰巨的任务。根据长期的研究成果和实际工作的经验，提出了用纳米复合纤维加固应县木塔的建议，介绍了纳米复合纤维材料的特点，分析讨论了加固时的一些具体技术问题。  相似文献   

Health Risks and Environmental Inequity: A Geographical Analysis of Accidental Releases of Hazardous Materials     

Florence Lansana Margai 《The Professional geographer》2001,53(3):422-434

This study examines the spatial distribution and impact of nonroutine accidental releases of hazardous materials relative to the demographic composition of residents in nearby communities. First, atmospheric dispersion modeling methods are used to delineate the impact zones of worst‐case accidents in two New York counties over the last ten years. Next, using accidental reports for 1997, GIS and statistical operations are used at the census tract level of the two counties to determine whether these incidents disproportionately affected disadvantaged neighborhoods. The results suggest that the areas of high‐impact from accidental releases of hazardous materials are best characterized by a large proportion of families below the poverty line, Hispanics, and other minorities.  相似文献   

贵池铜山铜矿床成因探讨   总被引：6，自引：6，他引：6       下载免费PDF全文

俞沧海 《地质与勘探》2001,37(2):12-16

铜山铜矿床矿化类型可划分为层状含铜黄铁矿型，含铜角砾岩型，含铜夕卡岩型和含铜班岩型，控矿因素为地层，岩浆岩及构造，其中层间断裂与接触带构造是主要的容矿构造，铅，硫，氢，氧同位素特征及成矿温度研究表明矿物质和热液主要来源于铜山岩体，矿床成因为层控夕卡岩型铜矿床。  相似文献   

新型环境矿物材料——堇青石质泡沫陶瓷的研制   总被引：5，自引：0，他引：5  

李金洪  鲁安怀  宋庭兵  黄英 《矿物学报》2001,21(3):481-484

以聚氨脂泡沫塑料为前驱体，高岭土、铝土矿和滑石为原料，经配方和工艺设计，制备了以堇青石为主晶相的泡沫陶瓷，制成品密度为0．310－0．447g/cm^3，气孔率为81．7％－87．6％，孔径为0．2－0．5mm,平均抗压强度为0．98MPa。探讨了烧成温度对材料气孔率、抗压强度和吸水率等性能的影响。  相似文献