基于最大球算法定量表征土体空间孔隙网络     

解朝阳  张巍  姚东方  王坚  朱雨辰 《工程地质学报》2020,28(1):60-68

孔隙网络控制着土体渗流、排水固结与基质吸力等重要工程性质。本文介绍了多孔介质孔隙网络最大球建模基本原理与算法。以显微CT扫描振捣干法生成的南京粉砂试样为例,采用最大球算法建立了试样三维重构模型表征单元体(REV)的空间孔隙网络球棍模型,计算得到了样品REV尺度的孔隙网络参数,统计发现,孔隙半径、喉道半径、孔隙配位数、孔隙截面形状因子、喉道截面形状因子与喉道长度等孔隙参数均近似服从正态分布,孔隙体积近似服从衰减型指数分布。孔隙与喉道半径分别分布在100μm与65μm以内,两者数学期望分别为40. 0μm与18. 0μm;配位数分布在25以内,数学期望为5. 1;孔隙与喉道截面形状因子分别分布在0. 01~0. 04与0. 01~0. 05的区间内,两者数学期望分别为0. 019与0. 033;喉道长度分布在100~800μm以内,数学期望为292. 22μm。同时发现,样品中体积小于1. 5×10^7μm^3的小孔隙数量超过90%。本方法可应用于土体细观孔隙结构的定量表征。  相似文献   

基于混合聚类的岩体结构面优势分组方法     

许扬  张文  符锐  聂振邦  兰志广  陈怀玉  单博 《世界地质》2020,39(1):113-120

提出一种基于凝聚层次法和模糊C均值法的混合聚类法,用于对岩体结构面的优势组划分。该方法将结构面投放到在单位球面上,并使用欧式距离作为极点的相似性度量准则。先剔除结构面数据中的孤值产状,然后用凝聚层次法得到初步聚类结果,并将其作为FCM法的初始聚类中心,最后用FCM法划分优势组。通对人工生成产状样本的分组,验证了该法的正确性。将该方法应用于大藤峡坝址区实测的结构面数据的划分。在实测数据中寻找到两个孤值产状,成功将大藤峡D1y^1-3地层岩体结构面划分为两组,得到了符合实际的分组结果。  相似文献   

三峡库区龙门寨危岩体崩塌产生涌浪研究   总被引：1，自引：1，他引：0  

郑嘉豪  黄波林  张全  赵海林  冯万里  王健  陈小婷 《地质力学学报》2020,26(4):533-543

长江两岸高耸的危岩体对航道、沿岸居民带来巨大安全隐患。大宁河属于长江一级支流,龙门寨危岩体位于大宁河上,距离巫山县城仅1 km。利用FLOW-3D软件,模拟了145 m、175 m两种水位工况下龙门寨危岩体崩塌产生涌浪过程和涌浪传播过程。模拟结果表明,涌浪在145 m水位工况下最大浪高约为17.9 m,175 m水位工况下最大浪高约为11.6 m;在巫山县的五个码头处,两种水位工况最大涌浪爬高分别约为10.9 m、3.8 m;根据涌浪高度,对大宁河进行危险分区,145 m水位工况下极高危险区长度约4.4 km,很高危险区长度约1.9 km;175 m水位工况下极高危险区长度约3.0 km,很高危险区长度约1.0 km。研究结果有助于防控龙门寨危岩体潜在涌浪灾害危害,保障大宁河航道和巫山县码头安全,同时也为三峡库区滑坡涌浪灾害提供了预警依据。   相似文献   

Middle Permian organic carbon isotope stratigraphy and the origin of the Kamura Event     

《Gondwana Research》2020

Large carbon cycle perturbations associated with the Middle Permian (Capitanian) mass extinction have been widely reported, but their causes and timing are still in dispute. Low resolution carbon isotope records prior to this event also limit the construction of a Middle Permian chemostratigraphic framework and global or local stratigraphic correlation, and hence limit our understanding of carbon cycle and environmental changes. To investigate these issues, we analyzed the ¹³C_org values from the Middle Permian chert-mudstone sequence (Gufeng Formation) in the Lower Yangtze deep-water basin (South China) and compared them with published records to build a chemostratigraphic scheme and discuss the underlying environmental events. The records show increased δ¹³C_org values from late Kungurian to early Guadalupian, followed by a decrease to the late Wordian/early Capitanian. The early-mid Capitanian was characterized by elevated δ¹³C_org values suggesting the presence of the “Kamura Event”: an interval of heavy positive values seen in the δ¹³C_carb record. We propose that these heavy Capitanian δ¹³C values may be a response to a marked decline in chemical weathering rates on Pangea and associated reduction in carbonate burial, which we show using a biogeochemical model. The subsequent negative δ¹³C excursion seen in some carbonate records, especially in shallower-water sections (and in a muted expression in organic carbon) coincide with the Capitanian mass extinction may be caused by the input of isotopically-light carbon sourced from the terrestrial decomposition of organic matter.  相似文献   

Development and Re‐Evaluation of Tourmaline Reference Materials for In Situ Measurement of Boron δ Values by Secondary Ion Mass Spectrometry     

Katharina Marger  Matthieu Harlaux  Andrea Rielli  Lukas P. Baumgartner  Andrea Dini  Barbara L. Dutrow  Anne‐Sophie Bouvier 《Geostandards and Geoanalytical Research》2020,44(3):593-615

Six tourmaline samples were investigated as potential reference materials (RMs) for boron isotope measurement by secondary ion mass spectrometry (SIMS). The tourmaline samples are chemically homogeneous and cover a compositional range of tourmaline supergroup minerals (primarily Fe, Mg and Li end‐members). Additionally, they have homogeneous boron delta values with intermediate precision values during SIMS analyses of less than 0.6‰ (2s). These samples were compared with four established tourmaline RMs, that is, schorl IAEA‐B‐4 and three Harvard tourmalines (schorl HS#112566, dravite HS#108796 and elbaite HS#98144). They were re‐evaluated for their major element and boron delta values using the same measurement procedure as the new tourmaline samples investigated. A discrepancy of about 1.5‰ in δ¹¹B was found between the previously published reference values for established RMs and the values determined in this study. Significant instrumental mass fractionation (IMF) of up to 8‰ in δ¹¹B was observed for schorl–dravite–elbaite solid solutions during SIMS analysis. Using the new reference values determined in this study, the IMF of the ten tourmaline samples can be modelled by a linear combination of the chemical parameters FeO + MnO, SiO₂ and F. The new tourmaline RMs, together with the four established RMs, extend the boron isotope analysis of tourmaline towards the Mg‐ and Al‐rich compositional range. Consequently, the in situ boron isotope ratio of many natural tourmalines can now be determined with an uncertainty of less than 0.8‰ (2s).  相似文献   

Copper Isotopic Analysis in Geological and Biological Reference Materials by MC‐ICP‐MS     

Kaj Sullivan  Daniel Layton‐Matthews  Matthew Leybourne  James Kidder  Zoltn Mester  Lu Yang 《Geostandards and Geoanalytical Research》2020,44(2):349-362

The characterisation of relative copper isotope amount ratios (δ⁶⁵Cu) helps constrain a variety of geochemical processes occurring in the geosphere, biosphere and hydrosphere. The accurate and precise determination of δ⁶⁵Cu in matrix reference materials is crucial in the effort to validate measurement methods. With the goal of expanding the number and variety of available geological and biological materials, we have characterised the δ⁶⁵Cu values of ten reference materials by MC‐ICP‐MS using C‐SSBIN model for mass bias correction. SGR‐1b (Green River shale), DOLT‐5 (dogfish liver), DORM‐4 (fish protein), TORT‐3 (lobster hepatopancreas), MESS‐4 (marine sediment) and PACS‐3 (marine sediment) have for the first time been characterised for δ⁶⁵Cu. Additionally, four reference materials (with published δ⁶⁵Cu values) have been characterised: BHVO‐1 (Hawaiian basalt), BIR‐1 (Icelandic basalt), W‐2a (diabase) and Seronorm? Trace Elements Serum L‐1 (human serum). The reference materials measured in this study possess complex and varied matrices with copper mass fractions ranging from 1.2 µg g^?1 to 497 µg g^?1 and δ⁶⁵Cu values ranging from ?0.20‰ to 0.52‰ with a mean expanded uncertainty of ± 0.07‰ (U, k = 2), covering much of the natural copper isotope variability observed in the environment.  相似文献   

High‐Precision,High‐Accuracy Oxygen Isotope Measurements of Zircon Reference Materials with the SHRIMP‐SI     

Janaína N. vila  Trevor R. Ireland  Peter Holden  Peter Lanc  Andrew Latimore  Norm Schram  John Foster  Ian S. Williams  Liane Loiselle  Bin Fu 《Geostandards and Geoanalytical Research》2020,44(1):85-102

Analytical protocols for SHRIMP‐SI oxygen isotope analysis (δ¹⁸O) of a suite of zircon reference materials (RMs) are presented. Data reduction involved a robust estimate of uncertainties associated with the individual spot as well as for groups where the spot data are combined. The repeatability of δ¹⁸O measurements is dependent on both the analytical conditions and the choice of the primary reference material. Under optimised conditions, repeatability was often better than 0.4‰ (2s) allowing sample uncertainties to be obtained to better than 0.2‰ (at 95% confidence limit). Single spot uncertainty combined the within‐spot precision with the scatter associated with repeated measurements of the primary zircon reference material during a measurement session. The uncertainty for individual spots measured under optimised conditions was between 0.3 and 0.4‰ (at 95% confidence). The analytical protocols described were used to assess a variety of zircon RMs that have been used for geochronology and for which laser fluorination oxygen isotope data are available (Temora 2, FC1, R33, QGNG and Ple?ovice), as well as zircons that have been used as RMs for trace element or other types of determination (Mud Tank, Monastery, 91500, AS57, AS3, KIM‐5, OG1, SL13, CZ3 and several other Sri Lankan zircons). Repeated analyses over nine sessions and seven different mounts show agreement within analytical uncertainty for Temora 2, FC1, R33, QGNG, Ple?ovice and 91500, when normalised to Mud Tank. For existing ion microprobe mounts with these materials, an appropriate δ¹⁸O can be determined. However, care should be taken when using zircons from the Duluth Complex (i.e., FC1, AS57 and AS3) as reference materials as our data indicated an excess scatter on δ¹⁸O values associated with low‐U zircon grains.  相似文献   

太湖梅梁湾藻华暴发消退-周期表层水体溶解性有机质分子特征     

庞佳丽  许燕红  何毓新  史权  何丁  孙永革 《湖泊科学》2020,32(6):1599-1609

人类活动引起的富营养化对太湖的碳循环模式可能产生严重影响,精细描述太湖藻华暴发-消退周期的溶解性有机质分子是了解太湖碳库动态变化的关键.本研究利用傅立叶变换离子回旋共振质谱技术,以太湖北部梅梁湾2017年5月至2018年5月的表层水体为研究对象,解析藻华暴发-消退周期溶解性有机质的来源和分子组成特征,进而理解浮游藻类异常增殖对水体溶解性有机质的影响及其在区域碳循环中的角色.研究结果表明,藻华暴发期浮游藻类生产力显著增加,使得表层水体的溶解性有机质从含量到分子组成均发生剧烈改变.含量上表现为溶解性有机碳浓度升高,分子组成上表现为CHO类化合物和以脂肪族类化合物为代表的活性组分占比增加,特征化合物以相对高饱和度和高含氧的小质量数分子为主.而在藻华消退期,随着藻类有机质贡献的减少和有机质降解过程的持续进行,含量上表现为溶解性有机碳浓度下降,分子组成上表现为CHOS、CHONS类化合物和富羧酸脂环类化合物等惰性分子占比增加,特征化合物以大质量数分子和相对低饱和度和低含氧的小质量数分子为主.研究结果表明,太湖水体的溶解性有机质分子组成在藻华暴发期受藻类有机质输入控制,在消退期受藻类有机质降解的影响.  相似文献   

地震作用下深埋隧道围岩形变的数值模拟研究          下载免费PDF全文

吕燕霞  扶海鹰  郁章剑 《地震工程学报》2020,42(1):215-220

隧道围岩受地震荷载作用影响产生开裂变形,给交通、安全与经济带来极大影响,为提升隧道安全稳定性能,以某市隧道为对象,研究地震作用下深埋隧道围岩形变的数值模拟。综合考虑地震动作用与地震波扩散特性,利用FLAC软件构建三维动力模型;通过边界设置解决地震波反射问题,基于物理力学参数与地震荷载条件,通过相对变形法研究地震条件下深埋隧道围岩变形特性、能量聚集特性与安全性能。研究结果显示:深埋隧道围岩受地震荷载作用影响,形成挤让、椭圆化的变形走向;变形达到最高值时,应变能量密度高于2350 J/m^3的区域集中在隧道Ⅰ洞左侧围岩边墙和中夹岩柱上;各监测点安全系数呈非对称性,隧道右侧下角区域安全系数低于国家相关标准,计算结果与实际测量结果一致。  相似文献   

2017年西藏米林6.9级地震前的热红外异常分析          下载免费PDF全文

张丽峰  王培玲  张朋涛  孙玺皓 《地震工程学报》2020,42(2):360-367

以小波变换和功率谱估计为研究方法,使用中国静止气象卫星热红外亮温数据,研究了2017年11月18日西藏米林MS6.9地震前的热辐射情况。结果发现震前4个月出现热红外异常,其后续演化方向与相关区域的断裂走向非常一致。在8月10日左右异常面积达最大,相对功率谱大于6倍的面积约为20万km^2,9月20日左右消失。分析相同频率2016年同期数据,结果显示在震中周围并未出现显著异常。时序曲线分析表明在8月12日相对功率谱达到峰值,为平均值的20倍,98天后米林地震发生;从7月4日到9月7日,地震当年相对功率谱偏离背景值和标准差,持续时间为65天。西藏地区的强震热红外异常表现出与地热资源分布较为一致的特征及特征周期相对较长的特点,为判定西藏地区的震情积累了一些经验。  相似文献