标志沉积层磁组构特征及其古环境意义研究     

丛友滋  张家强 《海洋地质与第四纪地质》1997,17(3):31-36

通过对长江三角洲及其邻近区域埋藏古土壤、潮坪、长江下游河道浸滩、舟山滨岸风成沙丘、南京黄土古土壤序列沉积体的磁组构测量统计分析，取得了各自的标志特征。该２特征揭示出，舟山滨岸风成沙丘与南京黄土吉土壤序列沉积的搬运介质能量位相基本一致，其物源来向却显示出巨大差异；上述两类沉积体与上述现今潮坪、河道漫滩沉积体地搬运介质能量位相及物源来向均显示出绝然不同的标志特征。然而浸滩物源来民南京黄土的物尖兵为向却  相似文献   

Numerical Analysis of Wave Forces on Arbitrarily Shaped Multi-Pillars Over Varying Topography     

Zhang Libang Research Engineer  First Institute of Oceanography  Qingdao 《中国海洋工程》1991,(4)

The modified hybrid element method (MHEM) is utilized to predict and analyze wave forces on arbitrarily shaped multiple bodies. This method can be applied to waves of all water depths, i. e. shallow, intermediate, and deep waters, on slowly varying seabed. The MHEM employs the ICCG method to save CPU and storage, thus the computation of wave forces for large multi-body systems can be carried out on microcomputers. Numerical results of the present method are compared with experimental data and other solutions. It is shown that the MHEM provides more accurate solutions of the wave forces than other numerical methods do. Therefore, the methodology presented herein can be used in the design of coastal and ocean structures.  相似文献   

Elasto-Plastic Analysis of Tubular Joints of Offshore Platforms by Finite Element Method     

Chen Tieyun Zhu Zhenghong Professor  Dept. of Naval Architecture  Ocean Engineering  Shanghai Jiao Tong University  Shanghai Lecturer 《中国海洋工程》1991,(1)

The plastic node method is reformulated by the variational principle and is applied to elasto-plastic finite element analysis of tubular joints, eventually including the effect of internal and external gussets, stiffener rings, etc., if necessary. Four different joints are studied here in detail for the elasto-plastic behavior, the strain at the hot spot, the strain concentration factor around the intersection line, and the propagation of the plastic region with loading up to collapse in order to determine the ultimate strength, safety factor, and development of the plastic field. The present results are in good agreement with the experimental results.  相似文献   

Computation of Viscous Uniform and Shear Flow over A Circular Cylinder by A Finite Element Method     

赵明  滕斌 《中国海洋工程》2004,18(2):267-280

The incompressible viscous uniform and shear flow past a circular cylinder is studied. The two-dimensional Navier-Stokes equations are solved by a finite element method. The governing equations are discretized by a weighted residual method in space. The stable three-step scheme is applied to the momentum equations in the time integration. The numerical model is firstly applied to the computation of the lid-driven cavity flow for its validation. The computed results agree well with the measured data and other numerical results. Then, it is used to simulate the viscous uniform and shear flow over a circular cylinder for Reynolds numbers from lO0 to lO00. The transient time interval before the vortex shedding occurs is shortened considerably by introduction of artificial perturbation. The computed Strouhal number, drag and lift coefficients agree well with the experimental data. The computation shows that the finite element model can be successfully applied to the viscous flow problem.  相似文献   

桶形基础平台三维有限元稳定性分析     

钱荣  周锡礽  孙克俐  张伟 《海洋技术学报》2003,22(4):49-53

以我国第一座桶形基础采油平台工程实例为原型，采用三维有限元计算方法对桶形基础稳定性分析。平台在波浪、风等荷载作用下，其稳定性不仅与平台的整体结构有关，而且与桶形基础及其周围土体相互作用相关。在计算中，利用薄层摩擦单元模拟土与结构间的相互作用，取得了很好的效果。分析结果表明桶形基础采油平台在设计条件下运行是较为稳定的。  相似文献   

Numerical simulation of solitary wave scattering by a circular cylinder array   总被引：1，自引：0，他引：1  

Ming Zhao  Liang Cheng  Bin Teng 《Ocean Engineering》2007,34(3-4):489-499

The interaction of a solitary wave with an array of surface-piercing vertical circular cylinders is investigated numerically. The wave motion is modeled by a set of generalized Boussinesq equations. The governing equations are discretized using a finite element method. The numerical model is validated against the experimental data of solitary wave reflection from a vertical wall and solitary wave scattering by a vertical circular cylinder respectively. The predicted wave surface elevation and the wave forces on the cylinder agree well with the experimental data. The numerical model is then employed to study solitary wave scattering by arrays of two circular cylinders and four circular cylinders respectively. The effect of wave direction on the wave forces and the wave runup on the cylinders is quantified.  相似文献   

南海高钙沉积物中18种常微量元素的ICP-AES测定方法研究     

王湘芹  陈志华  任红  孙琼 《海洋科学进展》2007,25(2):220-225

在利用ICP-AES分析南海高钙沉积物中的常微量元素时,钙、镁常常干扰其它元素测试。通过采用优化仪器工作参数、扣除背景值、谱线干扰校正和基体匹配的步骤,消除了元素干扰和钙、镁基体效应,提高了方法的灵敏度和准确度。通过对南海沉积物样品的大量实验和国家一级标准样验证,建立了适宜高钙海洋沉积物元素含量的ICP-AES测试方法。该方法检出限为1.55~271μg/L,相对标准偏差RSD<4.54%(n=6)。  相似文献   

The buckling of a corrugated carbon fibre cylinder under external hydrostatic pressure     

Carl T. F. Ross  Andrew P. F. Little 《Ocean Engineering》2001,28(9)

A theoretical and an experimental investigation was carried out, where a carbon fibre corrugated circular cylinder was tested to destuction under external hydrostatic pressure. The theoretical investigation was via the finite element method, where the structure was modelled with several orthotropic axisymmetric thin-walled shell elements. The experimental observations were aided with strategically placed strain gauges. Comparison between theory and experiment showed that the experimentally observed buckling pressure was a little lower than the theoretical prediction. This may have been due to the fact that the model had slight initial geometrical imperfections in the circumferenential direction.  相似文献   

鲁苏榴辉岩的地球化学     

韩宗珠 《中国海洋大学学报(自然科学版)》1994,(1)

以微量元素、稀土元素、Ｓｒ和Ｎｄ同位素变异特征为依据，确定鲁苏榴辉岩为多成因、多来源和多阶段，指出主要是在印支期扬子陆块与华北陆块碰撞造山作用过程中，挤入的上地幔碎片以及不同原岩类型的壳内高压变质岩碎块。燕山晚期的区域构造热事件使得某些榴辉岩的同位素体系再平衡。  相似文献   

Second order wave diffraction forces and runup by finite—infinite element method     

B.Y. Li  S.L. Lau  C.O. Ng 《Applied Ocean Research》1991,13(6):270-286

  相似文献