The impact of accelerometry on CHAMP orbit determination   总被引：6，自引：0，他引：6  

S. Bruinsma  S. Loyer  J. M. Lemoine  F. Perosanz  D. Tamagnan 《Journal of Geodesy》2003,77(1-2):86-93

 The contribution of the STAR accelerometer to the CHAMP orbit precision is evaluated and quantified by means of the following results: orbital fit to the satellite laser ranging (SLR) observations, GPS reduced-dynamic vs SLR dynamic orbit comparisons, and comparison of the measured to the modeled non-gravitational accelerations (atmospheric drag in particular). In each of the four test periods in 2001, five CHAMP arcs of 2 days' length were analyzed. The mean RMS-of-fit of the SLR observations of the orbits computed with STAR data or the non-gravitational force model were 11 and 24 cm, respectively. If the accelerometer calibration parameters are not known at least at the few percent level, the SLR orbit fit deteriorates. This was tested by applying a 10% error to the along-track scale factor of the accelerometer, which increased the SLR RMS-of-fit on average to 17 cm. Reference orbits were computed employing the reduced-dynamic technique with GPS tracking data. This technique yields the most accurate orbit positions thanks to the estimation of a large number of empirical accelerations, which compensate for dynamic modeling errors. Comparison of the SLR orbits, computed with STAR data or the non-gravitational force model, to the GPS-based orbits showed that the SLR orbits employing accelerometer observations are twice as accurate. Finally, comparison of measured to modeled accelerations showed that the level of geomagnetic activity is highly correlated with the atmospheric drag model error, and that the largest errors occur around the geomagnetic poles. Received: 7 May 2002 / Accepted: 18 November 2002 Correspondence to: S. Bruinsma Acknowledgments. The TIGCM results were obtained from the CEDAR database. This study was supported by the Centre National d'Etudes Spatiales (CNES). The referees are thanked for their helpful remarks and suggestions.  相似文献   

Geoid determination using adapted reference field, seismic Moho depths and variable density contrast   总被引：4，自引：0，他引：4  

H. A. Abd-Elmotaal  N. Kühtreiber 《Journal of Geodesy》2003,77(1-2):77-85

 The traditional remove-restore technique for geoid computation suffers from two main drawbacks. The first is the assumption of an isostatic hypothesis to compute the compensation masses. The second is the double consideration of the effect of the topographic–isostatic masses within the data window through removing the reference field and the terrain reduction process. To overcome the first disadvantage, the seismic Moho depths, representing, more or less, the actual compensating masses, have been used with variable density anomalies computed by employing the topographic–isostatic mass balance principle. In order to avoid the double consideration of the effect of the topographic–isostatic masses within the data window, the effect of these masses for the used fixed data window, in terms of potential coefficients, has been subtracted from the reference field, yielding an adapted reference field. This adapted reference field has been used for the remove–restore technique. The necessary harmonic analysis of the topographic–isostatic potential using seismic Moho depths with variable density anomalies is given. A wide comparison among geoids computed by the adapted reference field with both the Airy–Heiskanen isostatic model and seismic Moho depths with variable density anomaly and a geoid computed by the traditional remove–restore technique is made. The results show that using seismic Moho depths with variable density anomaly along with the adapted reference field gives the best relative geoid accuracy compared to the GPS/levelling geoid. Received: 3 October 2001 / Accepted: 20 September 2002 Correspondence to: H.A. Abd-Elmotaal  相似文献   

GPS数据处理中IGS基准站的选取   总被引：7，自引：0，他引：7  

隋立芬  许其凤 《测绘学院学报》2003,20(1):1-3

IGS基准站的选取问题是目前GPS数据处理中讨论的热点问题。文中从基准站选取的几何意义、统计意义和物理意义3个方面分析讨论了IGS基准站的选取问题。并通过对理论及大量算例的分析，提出了IGS基准站选取的一般原则。  相似文献   

大地测量数据接口技术与接口标准   总被引：5，自引：0，他引：5  

吕志平赵冬青  张西光李健 《测绘学院学报》2003,20(2):89-92,95

建立了由接口文件、接口文件处理器和共享信息模型组成的大地测量数据接口体系结构，划分了大地测量数据服务的3类不同接口类型。在建立了面向对象的接口数据模型的基础上，讨论了面向传统用户的控制点数字化成果格式、面向生产过程的大地控制网统一数据结构和面向GIS的大地测量数据交换格式。  相似文献   

黑龙江省湿地资源遥感信息解译分析   总被引：6，自引：0，他引：6  

杜春英  王育光  高永刚  石剑  杨晓强 《黑龙江气象》2003,(3):1-3

按黑龙江省湿地分类标准，应用资源卫星遥感技术，建立湿地资源解译标准，判别分析全省湿地资源现状与区域分布。  相似文献   

国家级数值预报产品分发系统          下载免费PDF全文

相秀珍 《气象》1997,23(8):21-24

随着９２１０工程系统建设的完成，Ｔ１０６中期数值预报产品分发采用了地面通信系统和卫星通信系统两种传输路径。地面通信系统由于受传输能力限制，国家气象中心根据区域、省，地市级的不同接收能力，采取了３种不同的传输方式以满足各级气象台站的需求；  相似文献   

ICP—AES法同时测定高纯氧化钇中稀土及非稀土杂质元素方法研究     

吕宝源  裘丽雯 《高校地质学报》1997,3(1):106-110

本文提出了用ＩＣＰ－ＡＥＳ法直接同时测定高纯氧化钇中１４个稀土和１６个非稀土杂质元素的分析方法，对被测元素的 谱线、氧化钇基本及背景影响进行了研究，用标准加入法测出氧化钇基准中的微量杂质元素，消除了由于忽略基准中的杂质元素含量给高纯氧化钇分析测定带来的误差，同时对工作条件进行了优化。方法中各被测元素的检出限为0.003～1.31ug/g，能够满足生产过程中的质量控制及进出口商品检验  相似文献   

火焰原子吸收法间接测定磷矿中氯   总被引：2，自引：0，他引：2  

达刘生 《岩矿测试》1997,16(1):80-81

火焰原子吸收法间接测定磷矿中氯达刘生１云南个旧市化肥厂中心化验室个旧６６１４１１目前磷矿中Ｃｌ－含量的测定多采用浊度法、氯离子选择电极法及离子色谱法。本文采用火焰原子吸收法来间接测定磷矿中Ｃｌ－，即在试样溶液中加入定量的Ａｇ＋，试样中Ｃｌ－与Ａｇ＋生...  相似文献   

氯对测定化合水的影响及其校正研究     

李继乐 《岩矿测试》1997,16(2):81-86

用差热和热（失）重法、ｐＨ值检验、离子色谱等分析方法考察和证实了Ｃｌ－对平菲尔特管重量法测定化合水（Ｈ２Ｏ＋）的干扰，研究其影响规律，提出用系数校正方法可获得Ｈ２Ｏ＋的准确结果。方法用于含氯深海沉积物和大洋多金属结核标准物质中Ｈ２Ｏ＋的定值分析，取得满意结果  相似文献   

对GB／T 19001—1994 idt ISO9001：1994标准的浅解和探讨     

冯铭璋 《上海国土资源》1997,(4):37-42

文章是对ＩＳＯ９００１标准精神的一些理解，并对该标准中一些条文规定展开讨论。  相似文献