复合动力钻进工艺在干热岩钻井中的应用研究          下载免费PDF全文

谭现锋  马哲民  段隆臣  刘肖  李颖  郭明义 《探矿工程》2021,48(7):1-8

2011年山东省地矿局在山东省利津县实施了国内第一个干热岩调查评价项目,采用转盘回转钻进,但钻效低、能耗高。为提高在高温硬岩条件下的钻进效率、缩短钻井周期、降低生产成本,2015年在福建省漳州市实施的中国地质调查局东南沿海深部地热HDR-1干热岩科学钻探工程井（井深4000.86 m,孔底温度109 ℃）和2017年在青海省共和县完成的GR1干热岩科学勘探井（井深3705 m,孔底温度236 ℃）,在施工中均探索使用了“转盘+螺杆钻具”复合钻进工艺,并在高温取心段首次测试应用了“转盘+涡轮钻具”复合取心钻进工艺,取得了良好的效果并就下一步研究方向提出了意见和建议,为螺杆钻具和涡轮钻具的深入研究提供了宝贵的高温施工经验,也将为我国干热岩科学钻探与深部地热资源勘探提供新的技术支撑。  相似文献   

进口爆破孔钻机配套钻塔的研制          下载免费PDF全文

张西坤  宋秋锋  申寿长  刘大仲  浦静怡  曹继玉  魏少军 《探矿工程》2021,48(6):80-86

进口DMH90型爆破孔钻机配套钻塔整体性强,起落塔快捷方便,钻塔高度满足不换杆一次成孔,即钻塔有效高度略大于钻孔深度,承受振动冲击力大,施工工作环境恶劣。基于这些特点和难点,爆破塔长期依赖进口,导致成本增高、周期加长,为此进行了进口DMH90型爆破孔钻机配套钻塔的替代进口研究工作。本文介绍了DMH90型爆破孔钻机配套ZT27-45型爆破孔钻塔的研制过程,主要对ZT27-45型爆破孔钻塔的设计要点、结构型式、塔体选材、焊接工艺、防止变形、消除应力、质量检验等方面进行了探索、试验和总结。生产施工实践表明,ZT27-45型钻塔制造质量达到了设计要求,满足爆破孔施工的需要,实现了替代进口,达到了降低成本、缩短工期和提高机械性能的目的。  相似文献   

FDS-P型绳索取心钻具研制及试验研究          下载免费PDF全文

李鑫淼  胡建超  马莎莎  郑庆辉  王嘉瑞 《探矿工程》2021,48(S1):370-374

针对复杂地层绳索取心钻进时易出现的内管总成打捞失败问题,开展了FDS-P型绳索取心钻具研制。基于内管总成打捞失败原因分析,完成了FDS-P型绳索取心钻具设计,通过室内试验,初步验证了钻具结构设计的合理性。为进一步验证钻具性能,在贵州页岩气井开展了野外生产试验,先后完成16个回次取心钻进,累计进尺39.03 m,岩心采取率达到98%以上,其中有6个回次发生堵心,内管打捞全部成功,内管到位及堵心均得到了及时提示。实际应用结果表明,FDS-P型绳索取心钻具结构设计合理,具有良好的到位及堵心报信提示作用,内管总成打捞可靠性得到显著提升,有效提高了易堵心地层钻进效率及岩心采取质量。  相似文献   

节理分布空间变异的地下洞室稳定性概率分析   总被引：1，自引：0，他引：1  

王川  冷先伦  李海轮  李刚 《岩土力学》2021,(1):224-232,244

以岩土材料力学参数空间变异性的"点估计-有限元"分析方法为基础,结合节理分析时自身存在几何模型、网格划分等特性,扩展了该方法在节理分布空间变异性分析方面的适用性,明确了具体的研究步骤与方法。以某抽水蓄能水电站为例,通过分析节理空间变异性对围岩变形与塑性区的影响,验证了扩展后该方法的准确性和合理性。对工程案例开挖揭露的1400余条节理进行概率统计,建立了节理空间变异性的有限元分析模型;采用扩展后的概率分析方法,研究了节理分布对地下洞室群围岩开挖稳定性的影响。研究结果表明:(1)对比概率分析得到的围岩变形概率分布与现场监测结果,发现剔除变形异常点后监测变形量值大部分位于得到的位移概率分布范围内,说明节理的空间变异性是导致监测变形波动的主要影响因素;(2)围岩变形概率分布的标准差能有效识别出围岩开挖变形受节理空间变异性的影响程度,对于所给出的案例依次为:机窝>边墙>顶拱;(3)围岩塑性区的概率分区能合理判断地下洞室群开挖时受节理影响较大的区域和范围,为工程施工的支护设计提供依据。  相似文献   

冻融循环下含节理类岩石试样剪切破坏特性     

徐新木  张耀平  付玉华  雷大星  邹雄刚 《吉林大学学报(地球科学版)》2021,51(2):483-494

为探究冻融循环对节理岩石抗剪力学特性的影响,针对冻融循环前后不同连通率节理岩石试样进行剪切特性试验,探究了节理试样的剪切破坏机制,对比分析了冻融前后节理试样抗剪强度的衰减趋势,分析了黏聚力及内摩擦角随岩石试样剪切破坏面分形维数的变化规律。结果表明：随冻融循环次数的增加,节理试样剪切应力-位移曲线发生显著变化,峰值剪应力出现明显下降,黏聚力及内摩擦角对比冻融前试样出现明显劣化,并且随节理试样连通率的增加,劣化程度加剧;在节理连通率相同时,随冻融循环次数的增加,剪切破坏面的分形维数呈现近指数函数递增的趋势,随分形维数的增加,节理试样的黏聚力损伤因子、内摩擦损伤因子也呈现指数函数增加的趋势;在冻融循环次数相同时,内摩擦角损伤因子随节理连通率的增大呈先减小后增大的趋势,而黏聚力损伤因子在冻融循环次数为30次前后分别呈递增和先减后增的趋势。  相似文献   

Climate change and the agricultural sector in Ireland: examining farmer awareness and willingness to adopt new advisory mitigation tools     

Domna Tzemi  James Breen 《Climate Policy》2019,19(5):611-622

Agriculture is responsible for the bulk of Ireland’s greenhouse gas (GHG) emissions. However, the potential to mitigate some of these emissions through the adoption of more efficient farm management practices may be hampered by farmers’ awareness and attitude towards climate change and agriculture’s role in contributing to GHG emissions. This paper presents results from a survey of 746 Irish farmers in 2014, with a view to understanding farmers’ awareness of, and attitudes to, climate change and GHG emissions. Survey results show that there was a general uncertainty towards a number of questions related to agricultural GHG emissions, e.g. if tilling of land causes GHG emissions, and that farmers were reluctant to take action to reduce GHG emissions on their farm. To further explore farmers’ attitudes towards climate change, a multinomial logit model was used to examine the socio-economic factors that affect farmers’ willingness to adopt an advisory tool that would show the potential reduction in GHG emissions from the adoption of new technologies. Results show that farmers’ awareness of human-induced global climate change was positively related to the tool’s adoption.

Key policy insights

• Irish farmers are generally not sufficiently aware of the impact of their activities on climate change.

• A quarter of farmers believed that climate change will only impact on their business in the long-term; such an attitude may lead to a reluctance amongst these farmers to adopt management practices that reduce GHG emissions.

• Awareness of climate change affects positively the adoption of new tools to reduce GHG emissions on farmers’ farms.

• IT literacy affects willingness to adopt new tools to address GHG emissions.

• Reception of agri-environmental advice can have a positive influence on farmers’ willingness to adopt new GHG emission abatement tools.

• Farmers in receipt of environmental subsidies are more likely to adopt new abatement tools, either because they are more environmentally conscious or because the subsidy raised their environmentally consciousness.

• Willingness to adopt differs between different farm enterprises; operating dairy enterprise increases the willingness to adopt new advisory mitigation tools.

  相似文献   

中国东部夏季降水与气温的联合EOF分析     

郑金新  黎洛丝  郑嘉雯  郑菲菲 《广东气象》2019,41(2):9-14

采用JEOF等方法分析中国东部夏季降水和气温的协同变化时空分布特征,结果表明:当时间系数为正时,第1典型场降水型态从北向南(下同)呈"++-"分布,气温表现为冷异常,500 hPa回归场在中纬度地区呈显著低压异常,SST回归场表现为太平洋海域呈西北-东南的分布;第2典型场降水呈"+-"分布,气温则呈"-+"分布;第3典型场降水分布呈中间型,气温场呈"-+"分布。  相似文献   

A comparison of frameworks for separating the impacts of human activities and climate change on river flow in existing records and different near-future scenarios     

Soghra Andaryani  Vahid Nourani  James Ball  Saeed Jahanbakhsh Asl  Hamidreza Keshtkar  Dennis Trolle 《水文研究》2021,35(7):e14301

  相似文献   

Fractographic determination of joint length distribution in chalk     

Dov Bahat 《Rock Mechanics and Rock Engineering》1988,21(1):79-94

Summary Measurements of fracture joint distribution combined with determinations of plume length and orientation on a vertical section of a single chalk layer near Beer Sheva, Israel, reveal that joints marked by unilateral and circular plumes are skewed towards the shorter sizes while joints decorated by bilateral plumes are skewed towards the longer sizes. The mean lengths of the unilateral and bilateral joints are 66.5 cm and 155.6 cm, with standard deviations of 30 cm and 60.6 cm, respectively. These results as well as joint length observations from other areas seem to suggest a bimodal length distribution. However, since the minor maximum is generally very weak, and due to some additional uncertainties, further confirmation of the present observations is needed.  相似文献   

Shear resistance of jointed rock masses and stability calculation of rock slopes     

Xing Zhang 《Geotechnical and Geological Engineering》1993,11(2):107-124

Summary Based on an extension to a model originally proposed by Zhang (1990), a method for estimating the shear strength of a jointed rock mass containing two joint sets is developed. Compared to the original method in which only a single en-echelon joint set was considered, the new method has the following advantages: (1) it allows a much more realistic joint pattern to be incorporated; (2) the effects of joint connectivity and intersection angle between joint sets on shear strength are included. Use of the new method is demonstrated by application to the calculation of the stability of slopes in jointed rock. The importance of joint connectivity, joint persistence and joint set intersection angle on slope stability, as predicted by the model, is revealed.  相似文献