The structural role of Ti in aluminosilicate liquids in the glass transition range: insights from heat capacity and shear viscosity measurements     

Mathieu Roskosz  M.J Toplis 《Geochimica et cosmochimica acta》2004,68(3):591-606

The shear viscosities and 1 bar heat capacities of glasses and melts along the 67mol% silica isopleth in the system SiO₂-Al₂O₃-Na₂O-TiO₂ have been determined in the temperature ranges 780-1140 K and 305-1090 K respectively. Anomalous behaviour of both these properties is observed for compositions rich in TiO₂ and/or Al₂O₃, an observation attributed to liquid-liquid phase separation followed by anatase crystallization. For samples which do not show anomalous behaviour, it is found that the partial molar heat capacity of the TiO₂ component previously determined in Al-free compositions reproduces our heat capacities to within 1.3%. Viscosity data show that addition of TiO₂ tends to increase viscosity and melt fragility at constant temperature. Furthermore, heat capacity and viscosity data may be combined within the framework of the Adam-Gibbs theory to extract values of the configurational entropy of the liquids and qualitative estimates of the variation of the average energy barrier to viscous flow. Configurational entropy at 900K is inferred to decrease upon addition of TiO₂, in contrast to previous results from Al-free systems. The compositional limit separating normal from anomalous behaviour, as well as the data for homogenous melts have been used to constrain the structural role of Ti in these samples. Our data are consistent with a majority of Ti in five-fold coordination associated with a titanyl bond, in agreement with previous spectroscopic studies. Furthermore, we find no evidence for a Ti-Al interaction in our samples, and we are led to the conclusion that Al and Ti are incompletely mixed, a hypothesis consistent with the observed reduction of configurational entropy upon addition of TiO₂, suggesting an important role of medium range order in controlling the variations in thermodynamic properties.  相似文献   

关于修改完善钛砂矿地质勘探规范部分内容的建议     

卢建国 《地质论评》2021,67(3):6703681-6703735

正砂矿(金属矿产)地质勘查规范是2002年制订颁布的,在勘查工作及报告审查中发现:该规范有些地方不严不细,缺少明确统一标准,或者不具可操作性而导致混乱。所以有进一步修改完善的必要。砂矿(金属矿产)地质勘查规范(DZ/T0208-2002)适用于云南、广西的残坡积型钛砂矿勘查,本文结合上述地区钛砂矿的长期实践,谈谈规范中几处需要修改完善内容。  相似文献   

Establishment of modern circulation pattern at c. 6000 cal a BP in Disko Bugt,central West Greenland: opening of the Vaigat Strait     

KERSTIN PERNER  MATTHIAS MOROS  IAN SNOWBALL  JEREMY M. LLOYD  ANTOON KUIJPERS  THOMAS RICHTER 《第四纪科学杂志》2013,28(5):480-489

  相似文献   

钛-氨三乙酸-对氯苯基荧光酮-CTMAB四元配合物的分光光度法研究     

王东进  谢增鸿  樊祺泉  蔡文进  黄炳俊  张振欣 《岩矿测试》1990,(2)

本文研究Ti(Ⅳ)-氨三乙酸(NTA)-对氯苯基荧光酮(p-ClPF)-CTMAB四元配合物的显色条件。结果表明,在pH5.8—6.6形成了摩尔比为Ti(Ⅳ):NTA:p-ClPF:CTMAB=1:1:3:3的四元配合物,借此反应测定钛,灵敏度高,其ε_(573nm)=2.1×10~5L·mol~(-1)·cm~(-1)。Ti(Ⅳ)浓度在0—1.4μg/10ml范围服从比耳定律。已用本法直接测定了岩矿和铝合金中的Ti,结果满意。  相似文献   

固态萃取光度法测定痕量钛     

梁树权  肖宏展 《岩矿测试》1991,10(4):259-261

本文采用熔融联苯萃取8-羟基喹啉钛,继后溶固相于N,N-二甲基甲酰胺中,在390nm处测量吸光度。实验确定了各参数的最佳值,其摩尔吸光系数为7.9×10~3L·mol~(-1)·cm~(-1),一些干扰元素可以掩蔽。方法迅速、简便,用于测定铍铜合金中的痕量Ti,所得结果令人满意.  相似文献   

氢化物发生-原子荧光光谱法则定锑精矿中的微量砷     

韦山桃  卢启余 《矿产与地质》2007,21(4):482-486

使用氢化物发生—原子荧光光谱法测定锑精矿中的微量砷在国内外报道较少。文章在锑干扰状况试验、高锰酸钾溶液消除干扰的最佳条件选择试验、锑精矿中共存元素的干扰和消除试验的基础上,对样品进行了实测,并就其灵敏度、准确度和精密度进行了讨论。研究表明,该方法是测定锑精矿中微量砷的有效方法。  相似文献   

Magnetic petrology of the 1991–1995 dacite lava of Unzen volcano,Japan: Degree of oxidation and implications for the growth of lava domes     

Takeshi Saito  Naoto Ishikawa  Hiroki Kamata 《Journal of Volcanology and Geothermal Research》2007

To understand the oxidation state and process of oxidation of lava domes, we carried out magnetic petrological analyses of lava samples obtained from domes and block-and-ash-flow deposits associated with the 1991–1995 eruption of Unzen volcano, Japan. As a result, we recognize three different types of magnetic petrology, each related to deuteric high-temperature oxidation during initial cooling. Type A oxides are characterized by homogenous titanomagnetite and titanohematite, indicating a low oxidation state and high titanomagnetite concentrations. Type B oxides are weakly exsolved and contain titanohematite laths and rutile lenses, indicating a higher oxidation state. Type C oxides, which represent the highest oxidation state, are completely exsolved and composed of Ti-poor titanomagnetite, titanohematite, rutile, and pseudobrookite, indicating high hematite concentrations. Some grains in Types A and B show indications of reduction, which was related to interaction with volcanic gases subsequent to high-temperature oxidation. In terms of geological occurrence, the oxidation processes probably differed for endogenous and exogenous domes. Endogenous dome lavas are oxidized concentrically and are classified into the three types according to their location within the dome: samples from the surface are strongly oxidized and classified as Type C, while the inner part is unoxidized and classified as Type A. Exogenous dome lavas are unoxidized and assigned to Type A. Some samples show signs of reduction, which may have occurred around fumaroles. We propose that location within the dome and the process of dome growth are the factors that control oxidation.  相似文献   

东沟特大型斑岩钼矿床的物化探找矿效果   总被引：5，自引：6，他引：5  

付治国  宋要武  田修启  庞学勇  张松盛 《物探与化探》2006,30(1):33-37

对河南东沟钼矿床的区域物化探成果进行整理、研究,运用物化探资料循序渐进地揭示出钼矿床的空间分布规律。东沟特大型钼矿床的发现,不仅为我国的钼矿产业今后几十年的稳步发展将产生深远的影响,而且为在东秦岭—大别山钼成矿带进一步运用物化探作为充分必要手段,为寻找更多的钼矿资源提供了难得的成功经验。  相似文献   

含铜、铋和银的金精矿堆浸工艺综合回收试验研究     

程东会  何江涛  王金祥  李国斌  沈照理 《现代地质》2006,20(2):322-328

采用生物氧化技术和化学方法,利用堆浸工艺分步提取,对含Au 140~150 g/t、Ag 900~1 000 g/t、B i 9.0%~10.0%、Cu14%~17%的多金属浮选金精矿的综合回收工艺进行了研究。经小型搅拌试验,确定了生物氧化浸铜—氰化浸金、NaC l-FeC l3-HC l体系(氯盐法)浸出铋和银的技术方法。通过柱浸试验,研究了利用该方法分步浸取Au、Ag、Cu和B i在堆浸工艺中的可行性。在10 t精矿的扩大试验验中,验证了柱浸试验所取得的工艺指标和参数。试验中掺入骨架材料,解决了精矿在堆浸中的渗透问题;生物氧化过程中,菌种在含高浓度铜离子浸出液中反复驯化,对铜的耐受力提高到30 g/L;在NaC l-FeC l3-HC l体系浸出B i和Ag时,用H2O2将浸出液中的Fe2+氧化成Fe3+,使浸出液能循环使用,且B i和Ag同时浸出。Au、Ag、Cu和B i的最终浸出率分别为92.98%、65.09%、45.33%和53.49%。  相似文献   

碳纳米管和纳米二氧化钛复合光催化剂处理海洋柴油污染的研究     

吴云英  于晓彩  金晓杰  尹丹妮  尚晓琳  薛冠华 《海洋技术学报》2015,34(5):104-108

利用溶胶凝胶法自制了碳纳米管和纳米二氧化钛的复合光催化剂,采用投射电子显微镜和X光衍射仪对粉体的粒径、物象、形貌和热稳定性等进行表征。通过研究光照条件、催化剂的投加量、油的初始浓度、催化剂制备的煅烧条件等因素,考察了自制碳纳米管和纳米二氧化钛的复合催化剂对降解模拟海洋柴油污染的海水去除率的影响。研究发现,在可见光照条件下,400℃煅烧2 h的复合催化剂,投加量为0.4 g/L、柴油的初始浓度为0.6 g/L、反应的光照时间为4 h时效果最好,去除率可达到67.65%。  相似文献