Sediment transfer in an extremely low-gradient,low-relief and highly buffered system: Darwin Harbour catchment,northern Australia     

M. Nawaz  R. Wasson 《Australian Journal of Earth Sciences》2020,67(3):351-359

Abstract

Sediment yields from and sediment transfer within catchments of very low relief and gradient, which make up about 50% of Earth’s surface, are poorly documented and their internal sediment dynamics are poorly known. Sediment sources, their proportionate contributions to valley floors and sediment yield, and storage are estimated using fallout radionuclides ²¹⁰Pb_(ex) and ¹³⁷Cs in the catchments that drain into Darwin Harbour, northern Australia, an example of this understudied catchment type that appears to be globally at the extreme end of this category of catchments. Unchannelled grassy valley floors (dambos, or seasonal wetlands) trap ～90% of the sediment delivered from hillslopes by sheet and rill erosion. Further down valley, small channels transport ～10% of the sediment that escapes from the dambos, and the remaining sediment comes from erosion of the channels. In this case, the fractional sediment storage is very high as a result of the existence of dambos, a landform that depends for its existence on low gradients.  相似文献   

Limitations of suction‐controlled triaxial tests in the characterization of unsaturated soils          下载免费PDF全文

X. Zhang 《国际地质力学数值与分析法杂志》2016,40(2):269-296

Behavior of unsaturated soils is influenced by many factors, and the influences of these factors are usually coupled together. Suction‐controlled triaxial (SCTX) tests are considered to allow researchers to investigate influences of individual variables on unsaturated soils under specified stress path with controls of stresses, pore water, and air pressures. In the past 50 years, SCTX testing method has been established as a standard approach to characterize constitutive behavior of unsaturated soils. Most important concepts for modern unsaturated soil mechanics were developed upon results from the SCTX tests. Among these, one of the most important contributions in the constitutive modeling of elasto‐plastic behavior for unsaturated soils is the Barcelona basic model (BBM) proposed by Alonso et al. in 1990. The BBM successfully explained many features of unsaturated soils and received extensive acceptance. However, the SCTX tests are designed based upon the divide‐and‐conquer approach in which an implicit assumption is used: soil behavior is stress‐path independent. However, it is well‐established that unsaturated soil behavior is elasto‐plastic and stress‐path dependent. It is found that the SCTX tests in fact cannot control the stress path of an unsaturated soil during loading. This incapability, in combination with complicated loading/collapse behavior of unsaturated soils, makes the SCTX tests for characterizing unsaturated soil questionable. This paper discusses the limitations of the SCTX tests in the characterization of unsaturated soils. A possible solution to the problem was proposed based on a newly developed modified state surface approach. The discussions are limited for isotropic conditions. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Stability analysis of tunnels driven in jointed rocks by means of a homogenized limit analysis approach     

Samir Maghous  José E. B. Winiawer  Vanessa F. Pasa Dutra 《国际地质力学数值与分析法杂志》2014,38(18):2009-2032

Conceived as a potential alternative to the classical design methods employed for analyzing the stability of underground structures driven in jointed rocks, the homogenization approach stems from the heuristic idea that, from a macroscopic point of view, a rock mass cut by a network of joints may be perceived as a homogenized continuum. The strength properties of the latter can be theoretically obtained from the failure conditions of its individual constituents: rock matrix and joint interfaces. At the material level, the limit analysis reasoning is used in the context of homogenization to formulate the homogenized strength criterion of a jointed rock mass in the particular situation of a single set of parallel joints. As it could be expected, the obtained closed‐form expressions show the strength anisotropy induced by joint preferential orientation. The support functions (π functions) associated with the homogenized strength criterion are also determined in both plane strain and three‐dimensional cases. This criterion is then applied to the investigation of stability analysis of a tunnel excavated in a jointed rock mass. Upper bounds estimated of the stability factor are derived from the implementation of the kinematic approach directly on the homogenized underground structure. Finally, the approach is applied to analyze and discuss the collapse of the Pinheiros subway station (São Paulo, Brazil). Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Elastoplastic model with loading memory surfaces (LMS) for monotonic and cyclic behaviour of geomaterials     

Hervé di Benedetto  Matthieu Blanc  Samir Tiouajni  Alan Ezaoui 《国际地质力学数值与分析法杂志》2014,38(14):1477-1502

A new elastoplastic model called loading memory surface based on the critical state concept and the multi‐surface framework is proposed for geomaterials. The model uses a hypoelastic formulation and two plastic mechanisms. The formulations of the model are made in three‐dimensional stress–strain space and work under both monotonic and cyclic loadings. A newly introduced formalism makes it possible to obtain the cyclic response directly from the monotonic loading one. This formalism gives a three‐dimensional generalization of the well‐known Masing rule. The model has been validated against test results of Hostun sand under several conditions: monotonic and cyclic, drained and undrained, tests in compression and in extension, and at different confining pressures and different densities. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Mechanical transitional behavior of binary mixtures via DEM: Effect of differences in contact-type friction coefficients     

《Computers and Geotechnics》2017

This report presents a numerical investigation of the shear behavior of binary mixtures via a two-dimensional discrete element method. The effect of the coarse particle content on the peak shear strength of mixtures is investigated for different contact-type friction coefficients. A detailed analysis on the anisotropies enables us to understand the microscopic mechanisms that result in the dependency of the peak shear strengths on the coarse particle content. The contributions of different contact types to the peak shear strength are quantified. Lastly, the inter-particles structures are examined when the binary mixtures become coarse-particle-supported structures.  相似文献   

From soil aggregates to riverine flocs: a laboratory experiment assessing the respective effects of soil type and flow shear stress on particles characteristics          下载免费PDF全文

T. Grangeon  I. G. Droppo  C. Legout  M. Esteves 《水文研究》2014,28(13):4141-4155

Particles eroded from hillslopes and exported to rivers are recognized to be composite particles of high internal complexity. Their architecture and composition are known to influence their transport behaviour within the water column relative to discrete particles. To‐date, hillslope erosion studies consider aggregates to be stable once they are detached from the soil matrix. However, lowland rivers and estuaries studies often suggest that particle structure and dynamics are controlled by flocculation within the water column. In order to improve the understanding of particle dynamics along the continuum from hillslopes to the lowland river environment, soil particle behaviour was tested under controlled laboratory conditions. Seven flume erosion and deposition experiments, designed to simulate a natural erosive event, and five shear cell experiments were performed using three contrasting materials: two of them were poorly developed and as such can not be considered as soils, whilst the third one was a calcareous brown soil. These experiments revealed that soil aggregates were prone to disaggregation within the water column and that flocculation may affect their size distribution during transport. Large differences in effective particle size were found between soil types during the rising limb of the bed shear stress sequence. Indeed, at the maximum applied bed shear stress, the aggregated particles median diameter was found to be three times larger for the well‐developed soil than for the two others. Differences were smaller in the falling limb, suggesting that soil aggregates underwent structural changes. However, characterization of particles strength parameters showed that these changes did not fully turn soil aggregates into flocs, but rather into hybrid soil aggregate–floc particles. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Higher tritium concentrations measured in permafrost thaw lakes in northern Alberta          下载免费PDF全文

J. J. Gibson  S. J. Birks  Y. Yi 《水文研究》2016,30(2):245-249

Tritium concentrations were measured in a survey of 24 lakes, 15 wetlands, and 133 groundwaters in the oil sands region of northeastern Alberta and compared with both recent precipitation and precipitation sampled during the 1960s tritium peak caused by atmospheric thermonuclear weapons testing. Water samples from lakes included a group of 14 thaw lakes that had higher runoff attributed to melting of permafrost in peat plateaus within their watersheds. While tritium in all lakes was found to be intermediate between recent and 1960s concentrations, the thaw lakes were found to be significantly enriched in tritium compared with other lakes, as were unfrozen wetlands characterized by a thick sequence of low‐hydraulic conductivity peat. The results provide further evidence of different water sources to the thaw lakes and may indicate that melting of modern permafrost in part formed since the 1950s is occurring in these systems. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Constitutive modelling of fine-grained gassy soil: A composite approach     

Zhiwei Gao  Yi Hong  Lizhong Wang 《国际地质力学数值与分析法杂志》2020,44(9):1350-1368

Fine-grained marine sediments containing large undissolved gas bubbles are widely distributed around the world. Presence of the bubbles could degrade the undrained shear strength (s_u ) of the soil, when the gas pressure u_g is relatively high as compared with the effective stress in the saturated soil matrix. Meanwhile, the addition of bubbles may also increase s_u when the difference between u_g and pore water pressure u_w becomes smaller than the water entry value, causing partial water drainage from the saturated matrix into the bubbles (bubble flooding) during globally undrained shearing. A new constitutive model for describing the two competing effects on the stress-strain relationship of fine-grained gassy soil is proposed within the framework of critical state soil mechanics. The gassy soil is considered as a three-phase composite material with compressible cavities, which allows water entry from the saturated matrix. Bubble flooding is modelled by introducing an additional positive volumetric strain increment of the saturated clay matrix, which is dependent on the difference between pore gas and pore water pressure based on experimental observations. A modified hardening law based on that of the modified Cam clay model is employed, which in conjunction with the expression for bubble flooding, can describe both the detrimental and beneficial effects of gas bubbles on soil strength and plastic hardening in shear. Only two extra parameters in addition to those in the modified Cam clay model are used. It is shown that the key features of the stress-strain relationship of three fine-grained gassy soils can be reproduced satisfactorily.  相似文献   

Displacement velocity effects on rock fracture shear strengths     

《Journal of Structural Geology》2016

Triaxial shear tests are performed to assess the effects of displacement velocity and confining pressure on shear strengths and dilations of tension-induced fractures and smooth saw-cut surfaces prepared in granite, sandstone and marl specimens. A polyaxial load frame is used to apply confining pressures between 1 and 18 MPa with displacement velocities ranging from 1.15 × 10⁻⁵ to 1.15 × 10⁻² mm/s. The results indicate that the shearing resistances of smooth saw-cut surfaces tend to be independent of the displacement velocity and confining pressure. Under each confinement the peak and residual shear strengths and dilation rates of rough fractures increase with displacement velocities. The sheared-off areas increase when the confining pressure increases, and the displacement rate decreases. The velocity-dependent shear strengths tend to act more under high confining pressures for the rough fractures in strong rock (granite) than for the smoother fractures in weaker rocks (sandstone and marl). An empirical criterion that explicitly incorporates the effects of shear velocity is proposed to describe the peak and residual shear strengths. The criterion fits well to the test results for the three tested rocks.  相似文献   

电感耦合等离子体质谱法测定铅合金中的微量杂质元素镉和锡   总被引：1，自引：1，他引：0  

郝原芳  刘新  宋丽华  李丽君  徐英奎 《岩矿测试》2016,35(4):378-383

铅合金中的镉和锡由于含量较低,国家标准方法均为单一元素分析,步骤繁琐,检出限高,难以达到理想的检出要求。本文建立了应用电感耦合等离子体质谱法(ICP-MS)测定铅合金中微量级(μg/g级)杂质元素镉和锡的分析方法。采用单一的低浓度硝酸溶解铅合金,用低温慢溶的方式使样品溶解更加完全,减少了多离子对仪器的干扰;通过铅基体匹配和加入酒石酸保证了标准与样品介质的一致性,同时避免了锡的水解;以~(103)Rh作为内标元素,~(111)Cd和~(118)Sn作为测量同位素克服了质谱干扰。方法检出限为镉0.05 ng/g、锡0.04 ng/g,比国家标准方法的检出限(1~6μg/g)低,精密度小于4%。该方法试剂用量少,减少了处理样品的复杂性,实现了合金中微量级元素的准确测定。  相似文献