排序方式： 共有31条查询结果，搜索用时 31 毫秒
21.
鉴于双弧板式透空堤的消浪性能仍不理想,提出了一种潜堤—双弧板组合结构,并基于OpenFOAM软件建立了波浪与该结构相互作用的数值模型,采用试验结果对所建数值模型进行验证。在此基础上,讨论了该新型结构的消浪特性、波压力分布特征以及所受波浪力的影响因素。结果表明,透射系数随相对板宽的增大而减小,反射系数则相反。透射与反射系数随相对潜深的变化较为显著。当结构位于静水位上方（即相对潜深为-0.05）时,透射系数最小而反射系数最大;当结构位于静水位下方（即相对潜深为0.05）时,透射系数最大而反射系数最小。该组合结构两块弧板上下表面的正负压力变化关于横轴近似对称,不同测点处的压力值差异显著。水平波浪力与垂直波浪力的变化趋势大致相似,但垂直波浪力远大于水平波浪力。研究结果可为其工程应用提供理论指导与技术支撑。 相似文献
22.
基于推板造波理论和摇板造波理论,在Open FOAM平台上采用重叠网格技术建立黏性数值波浪水槽,并使用一种结合SIMPLE算法和PISO算法的PIMPLE算法对数值模型进行求解。利用开发的数值模型通过数值收敛性测试和网格独立性测试分别重点研究了时间步长、库朗数和网格尺寸对数值精度和计算效率的影响。并对比研究了此数值模型分别嵌入层流模型和湍流模型的计算精度和计算效率。实现的规则波和二阶有限振幅波与理论结果和试验结果吻合,验证了此黏性数值波浪水槽的造波和主动消波功能。基于二维数值波浪水槽,进一步研究了三维数值造波,数值计算结果与理论结果吻合良好。研究结果不仅验证了重叠网格在二维和三维两相流体域中求解运动物体与流场交互的可靠性和正确性,而且为使用此黏性数值波浪水槽解决更复杂的海洋工程问题提供了依据。 相似文献
23.
为准确探讨破碎波作用下气体如何卷入以及气泡的形成与输运特性, 文章结合粒子图像测速技术(particle image velocimetry, PIV)、高速相机和气泡测量系统, 以及基于Navier-Stokes方程的三维数值模型对气泡形成及其运动过程进行研究。研究结果表明: 文章建立的数值模型能合理地捕捉到破碎波作用下气体的卷入及其输运过程; 波浪的破碎会形成较大的气腔, 其破裂过程又将产生大量的气体微团; 气泡会增加水体的紊动, 造成水体与空气交界面附近形成大量的漩涡以及水体的飞溅; 气泡的破裂会消耗大量的水体能量, 同时发现较大的紊动动能与气泡的生成有关, 且气泡数随平均紊动动能的增加呈线性增长关系。 相似文献
24.
Wave loading on a coastal bridge deck due to nonlinear waves during a storm, where air may be fully or partially trapped between the girders, is studied through an extensive set of laboratory experiments. Wave cases tested cover a range of shallow-water to intermediate-water depth waves. A range of model elevations is tested to include conditions where the bridge may be partially inundated, to where the model is fully elevated above the still-water level (SWL). The model is constructed to include different percentages of air-relief openings, to capture a range of cases where no air can escape between the girders, to where all the air can escape and the wave can freely interact with the bottom of the bridge deck. Effects of the compressibility of entrapped air as well as the effects of the model scale are investigated through numerical calculations solving the compressible and incompressible Euler's equations, at both the model and prototype scales, by use of the open source CFD software, OpenFOAM. Along with coastal bridges, this research is applicable to other coastal and offshore structures, such as piers, submerged breakwaters and offshore platforms, in which wave loading or entrapped air is of concern. 相似文献
25.
26.
A Navier-Stokes solver in OpenFOAM® is combined with the Volume of Fluid (VOF) surface capturing method to investigate the wave interaction with depth-varying currents in intermediate and shallow waters. A special attention is paid to the separate effect of vertical current shear on near resonant triad wave interactions. It was found that in the presence of following vertical current shear, the wave exhibits a sharper crest and flatter trough, and the opposite is true in the presence of opposing vertical current shear. Our model results indicate that the wave steepness at which the current shear starts to affect the crest elevation is greater in deeper water than in shallower water. We found that adding vertical current shear to the uniform current further enhances the relative harmonic wave energy and the extent of triad interaction in the following current while weakens them in the opposing current. As a result, following and opposing current shear may cause wave to break at a lower and higher sea state respectively. Due to the increased wave nonlinearity in the presence of a following current shear, a linear superposition of the individual wave and current velocities is no longer adequate to represent the total horizontal velocity close to the free surface. 相似文献
27.
《国际泥沙研究》2020,35(3):237-248
This study presents the implementation and validation of a new sediment-scour model with a strict vertex-based,terrain conformal,moving-mesh technique within the framework of OpenFOAM.OpenFOAM lacks the ability to simulate large-amplitude motion needed for analysis of sediment-scour problems,and,thus,its application normally is restricted to small-amplitude cases to prevent computational divergence due to mesh deterioration.The proposed simple,moving-mesh technique in OpenFOAM is implemented to overcome the shortcomings of the conventional automatic mesh-motion techniques in handling large-amplitude moving geometries.The model is used to simulate a simple case of prescribed boundary motion,a previous experiment in the literature,and a new laboratory experiment for local scour due to submerged wall jets.The results are compared with both the experimental and other numerical results.The comparisons demonstrate that the proposed model has the novel advantage of allowing for more severe topographic variations,and can provide more reliable predictions for the key characteristics and evolution of the bed profiles in wall jet scour problems.Furthermore,to improve the practice of modeling wall jet scour,various turbulence modeling approaches and bedload equations also are evaluated and compared. 相似文献
28.
Accurate prediction of hydrodynamic forces on offshore structures is critical for safe and cost effective design of fixed and floating offshore structures exposed to a harsh environment. In the present paper, nonlinear interactions between regular waves and a single surface-piercing truncated circular column have been investigated using a frequency domain potential flow solver (DIFFRACT) and a full CFD solver in OpenFOAM for direct comparisons. Both the predicted free surface elevation around the column and the total force acting on the column have been analysed and compared with experimental data from MOERI. The degree of non-linearity and the contribution of each harmonic to the free surface run-up and wave forces have been examined, and evaluations of the accuracy and computational efficiency of the potential flow solver and the full CFD solver are provided and compared in the paper. Also of note are the local forms of the scattered waves around the column in numerical simulations, which are consistent with the Type-1 and Type-2 patterns identified in physical experiments at Imperial College. 相似文献
29.
雷诺数为3 900时三维圆柱绕流的大涡模拟 总被引：2，自引：2，他引：0
自从人们对层流的圆柱绕流现象有了系列研究及清楚的认识后,人们逐渐把目光投向湍流的圆柱绕流,但相关研究主要关注于模拟湍流方法的数值格式和精度问题,而忽略了对高雷诺下圆柱绕流流场本身的认识及规律的总结。基于开源代码Open FOAM的大涡模拟方法以连续方程和Navier-Stokes方程为控制方程,选用Smargorinsky模式为亚格子应力模型,采用有限体积法和一次预测两次修正的PISO算法,对Re=3 900时三维圆柱绕流问题进行了数值模拟研究,并着重分析了其尾流特征和性质。数值计算结果表明:大涡模拟方法可以模拟出细致的流场结构,该雷诺数下的圆柱绕流具有很强的三维及湍流效应,在圆柱后方约一倍直径的范围内存在回流区域,在靠近圆柱壁面的尾流区域的速度剖面呈"U"型,远离壁面的速度剖面呈"V"型。瞬时速度剖面始终围绕着时均速度的周围脉动,且距离圆柱越远瞬时速度场的脉动范围越大。 相似文献
30.
用ＯｐｅｎＦＯＡＭ 实现数值水池造波和消波 总被引：2，自引：2，他引：0
基于OpenFOAM求解器interDyMFoam,开发实现数值水池造波(包括推板和摇板造波)和阻尼消波。所编写的造波边界条件,可依据实验造波理论将各种造波模式植入其中,从而实现各种波的数值造波。首先进行了线性波的数值造波实验,通过结合阻尼消波段的应用,造波水池可提供稳定的线性波。还进行了瞬时极限波和有限振幅的数值造波实验,与实验数据或同类数值结果吻合很好,进一步验证了的数值造波和消波方式的可靠性。 相似文献