内含裂隙角的恐龙化石轴向受压数值试验及裂纹扩展机理研究          下载免费PDF全文

杜圣贤  陈军  于学峰  贾超  张尚坤  宋香锁  罗文强 《山东国土资源》2019,35(5)

面临众多古生物化石遭受风化破坏的现实,恐龙化石保护是一项世界性难题。化石的风化原因多种多样,其中化石内部裂隙是导致恐龙化石风化、破坏的重要因素。该文以岩石断裂力学为理论依据,模拟分析内含裂隙的恐龙化石在压力作用下的破坏情况。通过数值模拟的方法,进行了内含裂隙恐龙化石数值压缩试验,并对内含裂隙的恐龙化石裂纹扩展机理进行了研究。研究结果表明,随着裂隙角度增大,开裂角逐渐减小,裂隙处特别是两端应力集中,其他部位应力较低、分布均匀;裂纹扩展是从裂纹尖端起裂,最终裂纹扩展到边缘。此研究结果为揭示恐龙化石风化机理和开展保护提供了基础参考资料。  相似文献   

2001-2015年中国植被覆盖人为影响的时空格局   总被引：3，自引：0，他引：3  

王建邦  赵军  李传华  朱钰  康重阳  高超 《地理学报》2019,74(3):504-519

基于MODIS-NDVI和气温、降水数据,使用基于变异系数的人为影响模型定量计算了2001-2015年中国植被覆盖人为影响,辅以趋势分析、Hurst指数等方法探讨了中国植被覆盖人为影响的时空变化特征及未来演变趋势。研究发现：① 2001-2015年,中国植被覆盖人为影响由南向北空间分异愈发明显,年均值为-0.0102,植被覆盖在人类活动影响下轻微减少,负影响面积占51.59%,略大于正影响面积。② 中国植被覆盖人为影响年际变化特征明显,整体呈负影响波动减少趋势,降速为0.5%/10a,其中正影响、负影响均呈增大趋势,正影响增速（0.3%/10a）远大于负影响（0.02%/10a）。③ 2001-2015年间,中国植被覆盖人为正影响重心向东北方向移动,负影响重心向西南方向移动,东北部植被覆盖在人为影响下不断改善,西南部人类活动对植被破坏程度不断增大。④ 中国植被覆盖人为影响主要呈负影响减少和正影响增大趋势,面积占比分别为28.14%和25.21%,生态环境趋于改善。⑤ Hurst指数分析表明,中国植被覆盖人为影响未来演变趋势的反向特征强于正向特征,主要呈人为负影响先减少后增大趋势,面积占比15.59%。  相似文献   

基于旅游开发影响的五台山植被景观特征分析     

牛莉芹  程占红 《地理研究》2019,38(5):1162-1174

以往旅游对植被影响的评价成果较多,但是旅游影响下植被景观与地理因子之间的关系报道较少。本文利用多种数量生态学方法探讨了五台山旅游开发与植被景观之间的生态关系。结果表明：① 旅游开发影响下五台山植被景观可分为单优乔木区、草本区、差级乔草区、中级乔草区、中级灌草区、良级灌草区、良级乔灌草区、优级乔灌草区、以及寺庙区、商业区或居民区9种类型。② 在除趋势对应分析中,第一轴与所有因子的相关性都较大,第二轴与旅游干扰度和海拔呈显著的负相关性。各植被景观类型的空间分布在一定程度上取决于关键性指标的空间格局。③ 除趋势典范对应分析方法能够大大提高植被景观特征与地理因子间的相关性,并将其直观地表达于排序图中。在植被景观特征与地理因子的关系上,第一轴上的相关系数是0.858_DCCA>0.828_DCA,第二轴上的相关系数是0.583_DCCA>0.501_DCA,这说明除趋势典范对应分析方法更优。  相似文献   

Simulating runoff generation and its spatial correlation with environmental factors in Sancha River Basin: The southern source of the Wujiang River     

Hou  Wenjuan  Gao  Jiangbo 《地理学报(英文版)》2019,29(3):432-448

Journal of Geographical Sciences - Runoff generation is an important part of water retention service, and also plays an important role on soil and water retention. Under the background of the...  相似文献   

Effects of installation on the cyclic axial behaviour of suction buckets in sandy soils     

《Applied Ocean Research》2019

Suction buckets differ with their easy and cost-efficient installation technique from other foundation types for offshore wind turbines. For successful completion of their installation process, suction is essential, but the imposed seepage leads to the changes in states of the soil in and around the bucket. Especially, a loosening of soil inside the bucket affects the load carrying behaviour of bucket subjected to repetitive loading resulting from environmental conditions. In this study, the behaviour of buckets under cyclic axial compressive loads with considering a possible loosening and related changes in permeability of soil inside the bucket is investigated numerically. In the framework of finite element analysis, a fully coupled two-phase model and a hypoplastic constitutive model are used to describe the saturated sandy soil behaviour under repetitive loading. The porosity-permeability variation is taken into account by Kozeny–Carman relationship. Special attention is dedicated to load carrying behaviour of bucket top plate, inner and outer skirt as well as base and their changes resulting from a loosening of soil inside the bucket with variable aspect ratio. For this purpose, cyclic axial compressive loads which cause an attenuation and progressive failure of soil-bucket system response are considered. The main findings on the changes in load carrying behaviour of bucket are presented and discussed.  相似文献   

浙江省三疣梭子蟹产量波动及潜在影响因素分析     

胡荧斌  徐美佳  王天姿  何毓钦  王迎宾 《海洋科学》2019,43(2):69-73

依据2000—2015年浙江省三疣梭子蟹(Portunustrituberculatus)渔获量的数据,以及影响渔获量的因素(管理类因素、环境类因素和营养关系类因素等共11个因子),使用广义加性模型(GAM)对各类因素对三疣梭子蟹渔获量的影响进行了分析。结果显示,赤潮面积、捕捞努力量和放流数量对三疣梭子蟹渔获量影响显著(P0.01)。3个因子的累积解释比率达98.3%,其中,赤潮的解释比率最大,达到47.2%,捕捞努力量的解释比率为37.8%,放流数量的解释比率为13.3%。三疣梭子蟹渔获量随着赤潮面积增加有所减少,随着捕捞努力量的加大有迅速增加的趋势,与放流尾数呈现正相关趋势。三疣梭子蟹渔获量的波动受诸多因素的影响。今后需开展更深入的研究,找到可能影响三疣梭子蟹渔获量的其他关键因素。  相似文献   

Numerical Simulation on Flow Past Two Side-by-Side Inclined Circular Cylinders at Low Reynolds Number     

Liu  Cai  Gao  Yang-yang  Qu  Xin-chen  Wang  Bin  Zhang  Bao-feng 《中国海洋工程》2019,33(3):344-355

A series of three-dimensional numerical simulations is carried out to investigate the effect of inclined angle on flow behavior behind two side-by-side inclined cylinders at low Reynolds number Re=100 and small spacing ratio T/D=1.5 (T is the center-to-center distance between two side-by-side cylinders, D is the diameter of cylinder). The instantaneous and time-averaged flow fields, force coefficients and Strouhal numbers are analyzed. Special attention is focused on the axial flow characteristics with variation of the inclined angle. The results show that the inclined angle has a significant effect on the gap flow behaviors behind two inclined cylinders. The vortex shedding behind two cylinders is suppressed with the increase of the inclined angle as well as the flip-flop gap flow. Moreover, the mean drag coefficient, root-mean-square lift coefficient and Strouhal numbers decrease monotonously with the increase of the inclined angle, which follows the independent principle at small inclined angles.  相似文献   

Wedge impact with the influence of ice     

《Applied Ocean Research》2019

This work presents a canonical study on a wedge entering water near a single piece of ice using computational-fluid-dynamics (CFD) and a Wagner-type theoretical model with corrections for non-linear effects. Calculations for a series of conditions with ice of different sizes and locations relative to the wedge are conducted. The hydrodynamic force due to impact, the pressure distribution on the wedge surface, and the pile-up phenomenon are examined to study the role of ice in the impact process. The theoretical model is shown to be accurate and can serve as a useful method to assess slamming loads under the influence of ice. It is shown that even for the case of a small piece of ice, the slamming force on the wedge can increase by 30%.  相似文献   

轴压作用下双金属复合管组合作用与承载力分析     

朱振兴  杨璐  王法承  方成 《海洋工程》2019,37(4):98-106

为探究轴压作用下双金属复合海底管道的组合作用与承载性能,对双金属复合海底管道进行了试验研究和理论分析。开展了不锈钢衬管材料性能试验,对比了国际主流不锈钢本构关系模型和试验结果。利用ABAQUS建立了精细化的双金属复合管道轴压试验有限元模型,系统研究了关键参数如复合工艺产生的环向复合应力、钢管初始缺陷幅值等对双金属复合管在轴压作用下力学性能的影响规律。通过对比已有轴压双金属复合管道试验结果,验证有限元模型。基于验证的有限元模型,对轴压作用下双金属复合管道的组合作用以及径厚比和材料强度对承载力的影响进行了分析。结果表明双金属复合管道的轴压极限承载力主要取决于基管的截面屈服荷载,并随着管径和材料强度的提高而增大。并依据分析结果对双金属复合海底管道的设计提出建议。  相似文献   

钢板混凝土联肢剪力墙抗震性能试验研究     

伍云天  王枭  张婕  曾朕  徐金俊 《地震工程与工程振动》2021,41(1):44-52

以轴压比和钢连梁弯剪比为主要参数,设计并制作了3个1/4缩尺的钢板混凝土联肢剪力墙子结构,对试件施加恒定轴压力和水平往复加载.观察了各试件破坏特征,对比了顶层水平荷载-侧移曲线和骨架曲线以及延性系数和等效黏滞阻尼系数等抗震性能指标.结果表明:高轴压比会使整个试件的延性变差;弯剪比越大试件耗能能力越好,弯剪比越小试件刚度...  相似文献