近60年来长江河口河势变化及其对水动力和盐水入侵的影响I.河势变化   总被引：4，自引：4，他引：0  

朱建荣  鲍道阳 《海洋学报》2016,38(12):11-22

河势是影响河口水动力和盐水入侵基本因子。本文利用20世纪50和70年代长江河口海图,数值化岸线和水深,结合2012年长江河口实测水深资料,分析长江河口自50年代以来的河势变化。长江河口为分汊河口,50年代仅为二级分汊,至70年代才形成三级分汊,四口入海的河势格局。70年代相比于50年代,北支淤浅严重,其上、中、下段容积变化分别为-64.13×106、-306.60×106和-639.27×106 m3,对应的变化率分别为-16.30%、-22.74%和-25.69%,均显著减小;南支的上、中、下段容积变化分别为-28.61×106、-35.69×106和126.43×106 m3,相应的变化率分别为-1.30%、-2.12%和4.36%;北港由于崇明浅滩和横沙浅滩的淤浅,下段容积明显减小,其上段和下段容积变化分别为109.21×106和-797.14×106 m3,对应的变化率分别为5.01%和-15.25%;南港上段由于河道淤浅容积减小,下段北由于铜沙浅滩被冲开形成北槽,导致水深变深、容积增加,其上段、下段北和下段南容积变化分别为-238.95×106、203.58×106和153.34×106 m3,对应的变化率分别为-8.96%、6.85%和3.26%。2012年相比于70年代,北支由于大量淤浅和围垦容积大幅减小,其上、中、下段容积变化分别为-199.06×106、-504.61×106和-654.12×106 m3,对应的变化率分别为-60.45%、-48.44%和-35.38%;南支的上、中、下段容积变化分别为92.34×106、193.01×106和-163.62×106 m3,相应的变化率分别为4.24%、11.73%和-5.40%;北港上段青草沙水库的围垦和下段横沙东滩的围垦造成面积和容积减小,其上段和下段容积变化分别为-154.64×106和-511.79×106 m3,对应的变化率分别为-6.75%和-11.55%;南港由于上段河道刷深而下段九段沙以及南汇边滩淤浅、围垦,导致其容积上段增加,下段减小,上段、下段北和下段南容积变化分别为136.39×106、-658.28×106和-1266.11×106 m3,对应的变化率分别为5.62%、-20.73%和-26.06%。  相似文献   

胶州湾沉积物重金属形态不同浸取方法的比较与污染讯息指示作用初探   总被引：1，自引：0，他引：1  

梁宪萌  宋金明  段丽琴  袁华茂  李宁  李学刚 《海洋学报》2016,38(10):12-21

海洋沉积物中重金属的活性形态对于指示沉积物污染状况具有重要作用;为探寻简洁且能够有效提取重金属活性形态的浸提方法;实验研究了0.1 mol/L和1 mol/L盐酸的单级提取和欧共体标准局（European Community Bureau of Reference）提出的BCR分级提取法对胶州湾表层沉积物中重金属（Cr、Cu、Ni、Pb、Zn）和Al、Fe、Mn的浸取效果。结果显示;3种提取方法提取的金属含量呈显著正相关关系;两种浓度的稀盐酸对BCR方法中的酸可提取态和可还原态金属均具有较好浸提效果;但对可氧化态金属浸提能力相对较弱。不同提取方法的人为信号指数（ASI）计算结果表明;BCR浸取法提取结果的金属ASI值最大;表明其对沉积物中金属活性形态提取效率较高;1 mol/L HCl提取结果的金属ASI值最低;可能是较高浓度强酸使沉积物较大颗粒内层中“惰性”金属被浸取出来;“增加”了金属活性组分的污染讯息信号;对沉积物中Cu、Pb和Zn而言;0.1 mol/L HCl提取结果的ASI值与BCR方法接近。经过Al归一化后;0.1 mol/L HCl浸提的重金属含量的空间分布与胶州湾的实际污染状况相吻合;表明0.1 mol/L的HCl在一定程度上能够代替复杂的BCR浸取法;此方法可简化重金属活性形态的提取步骤;适合大范围沉积物重金属污染评价。  相似文献   

利用监督分类快速提取分层设色图件中数据的方法     

刘晓  黄海军  孙荣涛  张照录  宋明春  董慧君 《海洋科学》2016,40(7):110-114

为了快速将分层设色图件中象元的颜色值转化为具有实际意义的属性标识或物理、化学参数值,从而提取分层设色图件中包含的数据,作者提出了根据不同颜色分量(RGB)构建颜色特征空间,基于最小距离监督分类方法快速提取分层设色图件中数据的方法。使用该方法对东半球海域海面水汽分布数据进行提取,取得了良好的效果。该方法可以广泛应用于物理海洋、环境科学、地质调查、地理信息系统建库等多个行业领域的数据提取工作中。  相似文献   

绿藻水溶性多糖的研究概况和进展   总被引：1，自引：0，他引：1  

李莎兰  洪亮  李诚博  刘晨光 《海洋科学》2016,40(9):145-151

对近年来绿藻多糖的提纯方法、组成结构及应用的研究进展进行了综述。绿藻多糖的提纯需要经过样品的前处理、提取和精制三个步骤,提取方法包括酸提、酶提、加入钙螯合剂提取、微波及超声波辅助提取。绿藻多糖是水溶性的硫酸化杂多糖。从石莼(Ulva)、浒苔(Enteromorpha)、礁膜(Monostroma)、小球藻(Chlorella)、蕨菜(Bracken)及刚毛藻(Bristles)中提取的多糖的化学组成及结构特征各不相同,而且多糖的化学组成和结构特征受提取方式的影响。绿藻多糖的生物相容性、生物可降解性及抗氧化、抗肿瘤、抗凝血、抗炎、免疫调节等多种生物活性使其在食品、医药、化妆品及农业中具有广泛的应用。有关绿藻多糖的精确结构、提纯方法及化学修饰的进一步研究将使绿藻多糖的应用更加广泛。  相似文献   

Copper Speciation in a Collection of Geochemical Reference Materials Using Sequential Extraction and Evaluation of the Validity Using XANES Spectroscopy          下载免费PDF全文

Atsuyuki Ohta  Ran Kubota 《Geostandards and Geoanalytical Research》2016,40(1):117-134

Copper speciation in a collection of Japanese geochemical reference materials (JSO‐1, JLk‐1, JSd‐1, ‐2, ‐3 and ‐4, JMs‐1 and JMs‐2) was achieved by sequential extraction and characterised using X‐ray absorption near‐edge structure spectroscopy. In the first step of the extraction, referred to as the acid fraction, between 1% and 20% total Cu within the reference materials was extracted. Such a result is typically accounted for by absorption of Cu onto clay minerals. However, the presence of Cu sulfate (an oxidation product of chalcopyrite) was observed in some of the stream sediments affected by mining activity (JSd‐2 and JSd‐3) instead. Copper was extracted in the reducible fraction (targeting Fe hydroxide and Mn oxide) (2–49% total Cu). Between 2% and 51% Cu was extracted in the oxidised fraction (targeting sulfides and organic matter). X‐ray absorption near‐edge structure spectroscopy clarified that the reducible fraction consisted of Cu bound to Fe hydroxide, whereas the oxidised fraction was a mixture of Cu bound to humic acid (HA) and Cu sulfide. In the oxidisable fraction, chalcopyrite was the predominant species identified in JSd‐2, and Cu bound to HA was the major species identified in JSO‐1 (a soil sample).  相似文献   

Porphyry Copper Deposit Prognosis in the Middle Region of the Bangonghu–Nujiang Metallogenic Belt,Tibet, Using ASTER Remote Sensing Data     

《Resource Geology》2018,68(1):65-82

The B angonghu–N ujiang metallogenic belt is considered to be T ibet’s third copper belt after the Y ulong and G angdese copper belts. The D uolong gold‐rich porphyry copper deposit, located in the western part of the B angonghu–N ujiang belt was recently recognized as a superlarge prospect. The A dvanced S paceborne T hermal E mission and R eflection R adiometer (ASTER ) was used to characterize the D uolong porphyry deposit alteration area, and three methods, color enhancement, band ratio transformation, and spectral angle mapping, were utilized to extract the phyllic and argillic alteration zones, which are typically considered the most important predictors of porphyry copper. Seven prospecting areas, which match mapped alteration zones, were delineated in the D uolong deposit. In addition, an ASTER image of the eastern region of the B angonghu–N ujiang belt in the X iongmei area was used to extract alteration information, and an area with image characteristics similar to the D uobuza and B olong ore deposits was identified as a prospecting area. Numerous malachite outcrops were identified in the field, and both laboratory analysis and isotopic dating confirmed that the deposit had formed concurrently with the D uobuza deposit (119 M a). Geologic mapping at the 1:5000 scale was conducted in the area, and three types of ore‐bearing rocks were identified, indicating that this area has significant potential to host ore deposits. The discovery of the X iongmei copper mining area is significant for the B angonghu–N ujiang belt.  相似文献   

基于高分二号卫星数据的煤矿区地质灾害信息提取研究          下载免费PDF全文

赵萍  李志辉  肖瑶袁峰  李晓晖 《地质科学》2018,(4):1361-1374

随着遥感数据获取技术和能力的全面提高,遥感数据呈现出明显的大数据特征。发展适应于遥感大数据的智能分析和信息挖掘技术,成为当前遥感技术研究的前沿。高分二号（GF-2）卫星数据是我国首颗自主研发的亚米级高分辨率卫星数据,具有观测幅宽、重访周期短、高辐射精度、高定位精度等优势,为未来我国地质灾害的长期、动态地监测和研究提供了高精度、稳定可靠的数据源。本文选取安徽谢桥煤矿2015年1月8日的GF-2卫星影像为研究数据,在对煤矿区主要地质灾害遥感地学分析的基础上,采用面向对象的影像分析方法对研究区由采煤活动所诱发的地质灾害信息进行自动提取。结果表明：利用GF-2卫星数据能够有效地识别地质灾害体的位置、范围、形态等空间分布特征;面向对象的自动提取方法对于煤矿区大面积的积水塌陷盆地、小规模的塌陷坑和线性的地裂缝都有很高的提取精度,识别精度达90% 以上;基于逐层剔除的思路构建的提取规则,为GF-2数据在地质灾害调查和大数据分析中的应用提供了很好的技术支持,也为其它地物目标的提取提供了参考,但在特征的选择和阈值的设定上需要具体分析。  相似文献   

基于面向对象分类的稀土开采区遥感信息提取方法研究     

代晶晶  吴亚楠  王登红  令天宇  王俊华 《地球学报》2018,39(1):111-118

离子吸附型稀土矿是我国宝贵的矿产资源,运用遥感影像分类技术提取稀土开采区可以准确地实现对稀土开采状况的监测,但仅利用光谱信息往往难以保证分类精度。本文以江西寻乌稀土矿区为研究区,以IKONOS影像为数据源,应用面向对象分类方法提取了稀土开采区的遥感信息。针对稀土开采区的分布特点,选择基于边缘的分割算法进行影像分割;结合地形信息、光谱信息及几何信息建立规则集,进行特征提取;最后采用隶属度函数法实现面向对象分类,并与传统的光谱角填图分类进行对比分析。研究结果表明,面向对象分类法提取稀土开采区的总体精度为92.49%,Kappa系数为0.857 6,与传统监督分类方法相比有了很大的提高。  相似文献   

云南个旧多金属矿石门坎—保和地区Sn、Sb元素的成矿信息识别与提取     

陈庆 《江苏地质》2018,42(3):476-480

石门坎—保和地区位于云南个旧多金属成矿区西南部,成矿背景复杂,成矿作用具有多期性和多样性。利用研究区1∶1万土壤化探数据,采用泛克里格法和因子分析相结合的方法,提取不同层次的成矿异常信息。结果表明:主因子F_3包含Mo-Au-Sb等元素,反映成矿过程中的岩体和热液相关信息;主因子F_4包含Sn-Bi-W元素,指示中低温热液矿化环境; Sb沿杨家田断裂呈串珠状分布,反映了由北东向构造控制的空间变化特征,与已知矿点对应良好; Sn元素异常在研究区北部呈双峰状环形分布,推测受隐伏岩体或者断层控制。根据元素组合异常F_3和F_4的分布规律,结合地质资料圈定出2个找矿靶区,为进一步找矿工作提供了方向。  相似文献   

Novel fusion approach on automatic object extraction from spatial data: case study Worldview-2 and TOPO5000     

U. G. Sefercik  S. Karakis  C. Atalay  I. Yigit  U. Gokmen 《国际地球制图》2018,33(10):1139-1154

The automatic extraction of information content from remotely sensed data is always challenging. We suggest a novel fusion approach to improve the extraction of this information from mono-satellite images. A Worldview-2 (WV-2) pan-sharpened image and a 1/5000-scaled topographic vector map (TOPO5000) were used as the sample data. Firstly, the buildings and roads were manually extracted from WV-2 to point out the maximum extractable information content. Subsequently, object-based automatic extractions were performed. After achieving two-dimensional results, a normalized digital surface model (nDSM) was generated from the underlying digital aerial photos of TOPO5000, and the automatic extraction was repeated by fusion with the nDSM to include individual object heights as an additional band for classification. The contribution was tested by precision, completeness and overall quality. Novel fusion technique increased the success of automatic extraction by 7% for the number of buildings and by 23% for the length of roads.  相似文献