Seasonal records of climatic change in annually laminated tufas: short review and future prospects   总被引：3，自引：0，他引：3  

J. E. Andrews  A. T. Brasier 《第四纪科学杂志》2005,20(5):411-421

Many Recent and fossil freshwater tufa stromatolites contain millimetre‐scale, alternating laminae of dense micrite and more porous or sparry crystalline calcites. These alternating laminae have been interpreted to represent seasonally controlled differences in the biotic activity of microbes, and/or seasonally controlled changes in the rate of calcification. Either way, couplets of these microbially mediated alternating calcified laminae are generally agreed to represent annual seasonality. Combined stable isotope (δ¹⁸O and δ¹³C) and trace element (Mg, Sr, Ba) geochemistry from Recent tufa stromatolites show that seasonal climatic information is available from these calcites. Variability in δ¹⁸O (and in one case Mg concentration) has been shown to be controlled primarily by stream temperature change, usually driven by solar insolation. In arid climates, seasonal evaporation can also cause δ¹⁸O enrichment by at least 1‰. Variability in δ¹³C results potentially from: (1) seasonal change in plant uptake of ¹²C‐enriched CO₂; (2) seasonal change in degassing of ¹²C‐enriched CO₂ in the aquifer system; and (3) precipitation of calcite along the aquifer or river flow path, a process that increases δ¹³C of dissolved inorganic carbon (DIC) in the remaining water. Mechanisms 2 and 3 are linked because calcite precipitates in aquifers where degassing occurs, e.g. air pockets. The latter mechanism for δ¹³C enrichment has also been shown to cause sympathetic variation between trace element/Ca ratios and δ¹³C because trace elements with partition coefficients much greater than 1 (e.g. Sr, Ba) remain preferentially in solution. Since degassing in air pockets will be enhanced during decreased recharge when water saturation of the aquifer is lowest, sympathetic variation in trace element/Ca ratios and δ¹³C is a possible index of recharge and therefore precipitation intensity. High‐resolution geochemical data from well‐dated tufa stromatolites have great potential for Quaternary palaeoclimate reconstructions, possibly allowing recovery of annual seasonal climatic information including water temperature variation and change in rainfall intensity. However, careful consideration of diagenetic effects, particularly aggrading neomorphism, needs to be the next step. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

Assessment of contaminants in Dubai coastal region, United Arab Emirates     

H. A. Al-Darwish  E. A. Abd El-Gawad  F. H. Mohammed  M. M. Lotfy 《Environmental Geology》2005,49(2):240-250

Coastal uses and other human activities have inevitably impinged on the Gulf environment; therefore, these regions require continuous monitoring. The investigated area covered the maximum fragments of Dubai coastal region in the Arabian Gulf. The determination of major oxides and trace metal concentrations in Dubai sediments revealed three heavily and moderately contaminated regions. One is in the far northeastern part at Al-Hamriya Sts 1–3 and contaminated by Fe, Cu, Pb, and Zn; the second is in the mid-northeastern part at Dry Docks and contaminated by Cu, Ni, Pb, and Zn; and finally, the third is in the near southwestern part at Dubal and contaminated by Fe, Mg, Cr, Ni, and Zn. Al-Hamriya St 3 represented the highest values of Cu, Pb, and Zn, whereas Dubal exhibited the maximum values of Fe, Mg, Ba, Cr, Mn, Ni, and V. The anthropogenic discharge and natural deposits are the main sources of contamination. In general, all trace and major elements showed the minimal levels at Jebel Ali Sanctuary (Sts 11, 12, 13) except for Sr and Ca, which showed their maximum values. The highest concentrations of Ca and Sr are mainly attributed to carbonate gravel sands and sands, which cover most stations. Each of V and Ni showed negative correlation with TPH, which may be indicated that the source of oil contamination in the region is not related to crude oil but mostly attributable to anthropogenic sources. The significant positive correlation, which was found between trace metals and TOC indicates that organic matter plays an important role in the accumulation of trace metals in case of Cu, Zn, and Pb.  相似文献   

Regional Variations in the Mineralogy of Metasomatic Assemblages in Mantle Xenoliths from the West Eifel Volcanic Field, Germany     

SHAW  CLIFF S. J.; EYZAGUIRRE  JIMENA; FRYER  BRIAN; GAGNON  JOEL 《Journal of Petrology》2005,46(5):945-972

Xenoliths record two distinct events in the mantle below theQuarternary West Eifel Volcanic Field, Germany. The first, duringthe Hercynian Orogeny, led to widespread formation of secondary,Ti-poor amphibole, clinopyroxene and phlogopite. The signatureof the second event, related to Quaternary volcanism, variesacross the field. At Dreiser Weiher and Meerfelder Maar, thisevent is characterized by amphibole–phlogopite–clinopyroxeneveins, hosted in lherzolite and harzburgite xenoliths broughtto the surface by sodic olivine nephelinite–basanite suitelavas. These veins formed from crystallization of sodic magmathat flowed along fractures in the mantle. At Rockeskyller Kopf,Gees and Baarley, the Quaternary event is characterized by wehrlitexenoliths, many of which have phlogopite–clinopyroxeneveins, that were transported by potassic foid suite lavas. Wehrliteformed by reaction of lherzolite–harzburgite, with a largevolume of potassic magma that flowed along grain boundariesrather than in fractures. During reaction, orthopyroxene wasconsumed and secondary clinopyroxene, olivine and phlogopiteprecipitated. Veins formed in wehrlites only during periodicover-pressure events. The composition of the magmas parentalto the veins is similar to the lavas that carried the xenolithsto surface, indicating that the source of foid and olivine nephelinite–basanitesuite magma is domainal, as was the flow regime and magma flux. KEY WORDS: Eifel; mantle xenoliths; metasomatism; trace elements  相似文献   

Three dimensional numerical simulation of residential building on shrink–swell soils in response to climatic conditions          下载免费PDF全文

Xiong Zhang  Jean‐Louis Briaud 《国际地质力学数值与分析法杂志》2015,39(13):1369-1409

Shrink–swell soils can cause distresses in buildings, and every year, the economic loss associated with this problem is huge. This paper presents a comprehensive system for simulating the soil–foundation–building system and its response to daily weather conditions. Weather data include rainfall, solar radiation, air temperature, relative humidity, and wind speed, all of which are readily available from a local weather station or the Internet. These data are used to determine simulation flux boundary conditions. Different methods are proposed to simulate different boundary conditions: bare soil, trees, and vegetation. A coupled hydro‐mechanical stress analysis is used to simulate the volume change of shrink–swell soils due to both mechanical stress and water content variations. Coupled hydro‐mechanical stress‐jointed elements are used to simulate the interaction between the soil and the slab, and general shell elements are used to simulate structural behavior. All the models are combined into one finite element program to predict the entire system's behavior. This paper first described the theory for the simulations. A site in Arlington, Texas, is then selected to demonstrate the application of the proposed system. Simulation results are shown, and a comparison between measured and predicted movements for four footings in Arlington, Texas, over a 2‐year period is presented. Finally, a three‐dimensional simulation is made for a virtual residential building on shrink–swell soils to identify the influence of various factors. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Designing geotechnical structures with a proper stability criterion as a safety factor     

《Computers and Geotechnics》2016

  相似文献   

Experimental determination of REE partition coefficients between zircon,garnet and melt: a key to understanding high‐T crustal processes          下载免费PDF全文

R. J. M. Taylor  S. L. Harley  R. W. Hinton  S. Elphick  C. Clark  N. M. Kelly 《Journal of Metamorphic Geology》2015,33(3):231-248

The partitioning of rare earth elements (REE) between zircon, garnet and silicate melt was determined using synthetic compositions designed to represent partial melts formed in the lower crust during anatexis. The experiments, performed using internally heated gas pressure vessels at 7 kbar and 900–1000 °C, represent equilibrium partitioning of the middle to heavy REE between zircon and garnet during high‐grade metamorphism in the mid to lower crust. The D_REE (zircon/garnet) values show a clear partitioning signature close to unity from Gd to Lu. Because the light REE have low concentrations in both minerals, values are calculated from strain modelling of the middle to heavy REE experimental data; these results show that zircon is favoured over garnet by up to two orders of magnitude. The resulting general concave‐up shape to the partitioning pattern across the REE reflects the preferential incorporation of middle REE into garnet, with D_Gd (zircon/garnet) ranging from 0.7 to 1.1, D_Ho (zircon/garnet) from 0.4 to 0.7 and D_Lu (zircon/garnet) from 0.6 to 1.3. There is no significant temperature dependence in the zircon–garnet REE partitioning at 7 kbar and 900–1000 °C, suggesting that these values can be applied to the interpretation of zircon–garnet equilibrium and timing relationships in the ultrahigh‐T metamorphism of low‐Ca pelitic and aluminous granulites.  相似文献   

An adaptive finite element model for wellbore breakout simulation     

Diogo L. Cecílio  Philippe R. B. Devloo  Sônia M. Gomes  Erick S.R. Santos 《国际地质力学数值与分析法杂志》2019,43(4):814-828

A finite element formulation is proposed and implemented for analysing the stability of excavated wells using the DiMaggio-Sandler constitutive elastoplastic model with a typical carbonate reservoir configuration. The quality of the finite element approximation is ensured by applying smooth curved elements adapted to the wellbore geometry, and h − p adaptive finite element meshes in the plastic zone. General purpose procedures are defined to transfer the elastoplastic deformation history to newly created integration points. A breakout damage criterion is proposed based on the second invariant of the deviatoric plastic deformation tensor. This damage criterion is used to apply a mesh movement algorithm to represent material collapse. The automatic successive application of the breakout damage criterion results in elliptical realistically looking geometries obtained in experiments reported in the literature.  相似文献   

A hydraulic invariance‐based methodology for the implementation of storm‐water release restrictions in urban land use master plans          下载免费PDF全文

Viviana Pappalardo  Alberto Campisano  Francesco Martinico  Carlo Modica  Luca Barbarossa 《水文研究》2017,31(23):4046-4055

A hydraulic invariance (HI)‐based methodology was developed as a tool to support implementation of storm flow control measures into land use master plans (LUMPs) for urban catchments. The methodology is based on the use of simple hydrologic analysis to compare predevelopment and postdevelopment catchment flow release scenarios. Differently from previous literature examples, for which the parcel scale is usually considered for the analysis, HI was pursued assuming the LUMP areas of transformation as the basic units for assigning storm water control measures in the form of flow release restrictions. The methodology was applied to a case study catchment in the southern part of the City of Catania (Italy), for which the LUMP re‐design has been recently proposed. Simulations were run based on the use of the EPA‐Storm Water Management Model and allowed deriving flow release restrictions in order to achieve HI at the subcatchment level for design events of different return period.  相似文献   

Extended finite element framework for fault rupture dynamics including bulk plasticity     

Fushen Liu  Ronaldo I. Borja 《国际地质力学数值与分析法杂志》2013,37(18):3087-3111

We present an explicit extended finite element framework for fault rupture dynamics accommodating bulk plasticity near the fault. The technique is more robust than the standard split‐node method because it can accommodate a fault propagating freely through the interior of finite elements. To fully exploit the explicit algorithmic framework, we perform mass lumping on the enriched finite elements that preserve the kinetic energy of the rigid body and enrichment modes. We show that with this technique, the extended FE solution reproduces the standard split‐node solution, but with the added advantage that it can also accommodate randomly propagating faults. We use different elastoplastic constitutive models appropriate for geomaterials, including the Mohr–Coulomb, Drucker–Prager, modified Cam‐Clay, and a conical plasticity model with a compression cap, to capture off‐fault bulk plasticity. More specifically, the cap model adds robustness to the framework because it can accommodate various modes of deformation, including compaction, dilatation, and shearing. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Diel stream geochemistry,Taylor Valley,Antarctica     

Sarah K. Fortner  W. Berry Lyons  LeeAnn Munk 《水文研究》2013,27(3):394-404

Unlike temperate and polythermal proglacial streams, the proglacial streams in Taylor Valley (TV), Antarctica, are derived primarily from glacier surface melt with no subglacial or groundwater additions. Solute responses to flow reflect only the interaction of glacial meltwater with the valley floor surrounding the stream channel. We have investigated the major, minor and trace element 24‐h variations of two proglacial melt streams, Andersen Creek and Canada Stream, originating from the Canada Glacier in TV, Antarctica. Both streams exhibited diel mid‐austral summer diurnal flow variation, with maximum flow being more than 50 times the minimum flow. Dissolved (< 0.4 µm) major, minor and trace solute behaviors through diel periods were strongly controlled by the availability of readily solubilized material on the valley floor and hyporheic‐biological exchanges. Anderson Creek had generally greater solute concentrations than Canada Stream because of its greater receipt of eolian sediment. Andersen Creek also acquired greater solute concentrations in the rising limb of the hydrograph than the falling limb because of dissolution of eolian material at the surface of the stream channel coupled with minimal hyporheic‐biological exchange. Conversely, Canada Stream had less available eolian sediment, but a greater hyporheic‐biological exchange, which preferentially removed trace and major solutes in the rising limb and released them in the falling limb. Given the dynamic nature of discharge, eolian, and hyporheic‐biological processes, solute loads in TV streams are difficult to predict. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献