2017-08-09新疆精河Ms6.6地震附近区域相对应变的变化分析     

高丽娟  邢喜民  高歌  李尚伟 《大地测量与地球动力学》2019,39(10):1002-1006

2017年精河M_S6.6地震震前，尼勒克、巴伦台和小泉沟台钻孔应变仪记录到显著的应变变化，经现场落实确认，异常是可靠的。根据这3个台的记录资料计算相对应变的变化，结果表明，地震前最大（小）主应变大小和方向分别出现明显加速和急剧偏转变化。此外还发现，相对应变场异常期间主方向与震源机制解P轴方位较为一致。  相似文献   

湖南省似大地水准面2017模型及精度分析     

董明旭  李建成  华亮春  姜卫平  尹昊华  敖敏思  曾翔强 《大地测量与地球动力学》2019,39(1):66-71

利用近7万个湖南及邻近省份重力观测数据、502个GNSS/水准控制点及数字高程模型，以EIGEN-6C4全球重力场模型作参考重力场，采用顾及地球曲率影响的各类地形质量位及引力的第二类Helmert凝集法严密算法，利用高分辨率地形数据恢复甚短波扰动重力场，确定空间分辨率2′×2′的高精度湖南省似大地水准面模型（HNGG2017）。经外部检核，模型整体精度均优于±0.022 m。与历史模型相比，新模型在湖南北部常德汉寿、西南部永州江永等地区精度得到显著改善。  相似文献   

A New Wavelet Method for Identification of Eddies and Assessment of Incidents on Islands of the Eastern Caribbean     

Jason D. Tambie  Madiha Farag-Miller  Keith Miller  Bheshem Ramlal  Michael Sutherland 《Marine Geodesy》2019,42(3):227-245

Using two dimensional continuous wavelet transforms, a novel method for identification of mesoscale eddies is presented to facilitate extraction of characteristics for area, amplitude, type, and location from maps of sea level anomalies. In comparison with the previously established growing method for eddy identification, it is found that the wavelet method identifies more than twice the number of eddies and is particularly better at resolving small eddies down to the 0.25 degree resolution of the data. Such research into eddy identification and tracking is significant to the assessment of eddies with potential to impact on coastlines of small islands. The method is applied to the identification of eddies on tracks towards islands of the Eastern Caribbean over 23?years. Spatial and temporal variation in rate of occurrence and magnitude is established. For Barbados there is an average of 9 anticyclonic incidents a year with maximum amplitude of typically 0.22?m in the dry seasons and 0.16?m in the wet seasons. Seasonal variation is reversed for the other islands with twice the number of anticyclonic incidents having maximum amplitudes of about 0.20?m annually.  相似文献   

激光跟踪仪在核电站主管道安装中的应用     

郭建兵 《北京测绘》2020,(1):123-125

目前,核电站的主管道焊接越来越多的采用了自动焊技术,这有利于提高焊接质量效率,还可以压缩建设成本。然而,主管道自动焊对焊缝的限差较现有工艺要求更高,高精度的测量是实现主管道自动焊的必要条件之一。本文针对主管道自动焊管口组队高精度的技术要求,提出采用激光跟踪仪对主管道自动焊相关的设备进行更为精密的三维工业测量,通过理论技术评定测量精度,然后选择测量仪器和编制具体的测量方案,最终保证了主管道自动焊精确组对的实现。  相似文献   

复杂地形景区三维导览图的设计与实现     

吴思锴  李百寿  郭家豪  李雪  张卫平 《北京测绘》2020,(1):38-43

为满足复杂地形景区对三维地图导览的需求,构建更为清晰的三维地图模型,提供良好的三维导览地图设计方案显得尤为重要。为了更好地与卫星影像进行贴合,DEM数据的采样密度要与卫星影像的分辨率一致。本文通过对比当下常用的四种空间插值方法的适用范围与运用特点,设置相关阈值及权重,直观比较了四种插值方法产生的插值结果,选择更适合复杂景区DEM插值的插值方法并对其进行精度提升,以此得到符合精度要求的DEM数据。最后利用相应地区的卫星影像进行地图投影及影像贴图,两种数据结合构建复杂景区的三维地图模型,给游客带来更为精确直观的定位信息和空间要素信息。  相似文献   

Fully coupled elastoplastic hydro-mechanical analysis of unsaturated porous media using a meshfree method     

Omid Ghaffaripour  Golnaz A. Esgandani  Arman Khoshghalb  Babak Shahbodaghkhan 《国际地质力学数值与分析法杂志》2019,43(11):1919-1955

This paper presents the first application of an advanced meshfree method, ie, the edge-based smoothed point interpolation method (ESPIM), in simulation of the coupled hydro-mechanical behaviour of unsaturated porous media. In the proposed technique, the problem domain is spatially discretised using a triangular background mesh, and the polynomial point interpolation method combined with a simple node selection scheme is adopted for creating nodal shape functions. Smoothing domains are formed on top of the background mesh, and a constant smoothed strain, created by applying the smoothing operation over the smoothing domains, is assigned to each smoothing domain. The deformation and flow models are developed based on the equilibrium equation of the mixture, and linear momentum and mass balance equations of the fluid phases, respectively. The effective stress approach is followed to account for the coupling between the flow and deformation models. Further coupling among the phases is captured through a hysteretic soil water retention model that evolves with changes in void ratio. An advanced elastoplastic constitutive model within the context of the bounding surface plasticity theory is employed for predicting the nonlinear behaviour of soil skeleton. Time discretisation is performed by adopting a three-point discretisation method with growing time steps to avoid temporal instabilities. A modified Newton-Raphson framework is designed for dealing with nonlinearities of the discretised system of equations. The performance of the numerical model is examined through a number of numerical examples. The state-of-the-art computational scheme developed is useful for simulation of geotechnical engineering problems involving unsaturated soils.  相似文献   

A novel coupled FDM-DEM modelling method for flexible membrane boundary in laboratory tests     

Hua-Xiang Zhu  Zhen-Yu Yin  Qiang Zhang 《国际地质力学数值与分析法杂志》2020,44(3):389-404

Difficulties are involved in discrete element method (DEM) modelling of the flexible boundary, that is, the membranes covering the soil sample, which can be commonly found in contemporary laboratory soil tests. In this paper, a novel method is proposed wherein the finite difference method (FDM) and DEM are coupled to simulate the rubber membrane and soil body, respectively. Numerical plane strain and triaxial tests, served by the flexible membrane, are implemented and analysed later. The effect of the membrane modulus on the measurement accuracy is considered, with analytical formulae derived to judge the significance of this effect. Based on an analysis of stress-strain responses and the grain rotation field, the mechanical performances produced by the flexible and rigid lateral boundaries are compared for the plane strain test. The results show that (1) the effect of the membrane on the test result becomes more significant at larger strain level because the membrane applies additional lateral confining pressure to the soil body; (2) the tested models reproduce typical stress and volumetric paths for specimens with shear bands; (3) for the plane strain test, the rigid lateral boundary derives a much higher peak strength and larger bulk dilatation, but a similar residual strength, compared with the flexible boundary. The latter produces a more uniform (or ‘diffuse') rotation field and more mobilised local kinematics than does the former. All simulations show that the proposed FDM-DEM coupling method is able to simulate laboratory tests with a flexible boundary membrane.  相似文献   

Experimental Study of a Command Governor Adaptive Depth Controller for an Unmanned Underwater Vehicle     

《Applied Ocean Research》2019

Unmanned Underwater Vehicles (UUVs) are increasingly being used in advanced applications that require them to operate in tandem with human divers and around underwater infrastructure and other vehicles. These applications require precise control of the UUVs which is challenging due to the non-linear and time varying nature of the hydrodynamic forces, presence of external disturbances, uncertainties and unexpected changes that can occur within the UUV’s operating environment. Adaptive control has been identified as a promising solution to achieve desired control within such dynamic environments. Nevertheless, adaptive control in its basic form, such as Model Reference Adaptive Control (MRAC) has a trade-off between the adaptation rate and transient performance. Even though, higher adaptation rates produce better performance they can lead to instabilities and actuator fatigue due to high frequency oscillations in the control signal. Command Governor Adaptive Control (CGAC) is a possible solution to achieve better transient performance at low adaptation rates. In this study CGAC has been experimentally validated for depth control of a UUV, which is a unique challenge due to the unavailability of full state measurement and a greater thrust requirement. These in turn leads to additional noise from state estimation, time-delays from input noise filters, higher energy expenditure and susceptibility to saturation. Experimental results show that CGAC is more robust against noise and time-delays and has lower energy expenditure and thruster saturation. In addition, CGAC offers better tracking, disturbance rejection and tolerance to partial thruster failure compared to the MRAC.  相似文献   

Revisiting the existence of an effective stress for wet granular soils with micromechanics          下载免费PDF全文

Jérôme Duriez  Richard Wan  Mehdi Pouragha  Félix Darve 《国际地质力学数值与分析法杂志》2018,42(8):959-978

A possible effective stress variable for wet granular materials is numerically investigated based on an adapted discrete element method (DEM) model for an ideal three‐phase system. The DEM simulations consider granular materials made of nearly monodisperse spherical particles, in the pendular regime with the pore fluid mixture consisting of distinct water menisci bridging particle pairs. The contact force‐related stress contribution to the total stresses is isolated and tested as the effective stress candidate for dense or loose systems. It is first recalled that this contact stress tensor is indeed an adequate effective stress that describes stress limit states of wet samples with the same Mohr‐Coulomb criterion associated with their dry counterparts. As for constitutive relationships, it is demonstrated that the contact stress tensor used in conjunction with dry constitutive relations does describe the strains of wet samples during an initial strain regime but not beyond. Outside this so‐called quasi‐static strain regime, whose extent is much greater for dense than loose materials, dramatic changes in the contact network prevent macroscale contact stress‐strain relationships to apply in the same manner to dry and unsaturated conditions. The presented numerical results also reveal unexpected constitutive bifurcations for the loose material, related to stick‐slip macrobehavior.  相似文献   

沉积物中硬质粘土层的研究进展          下载免费PDF全文

孔凡彪  徐树建  贾广菊 《山东国土资源》2018,34(3)

大量的钻孔资料表明,平原地区及其海域沉积物中普遍有硬质粘土层的存在。硬质粘土层在工程地质、地理学研究等方面具有重要的价值,它不仅是高层建筑的持力层,而且是研究全球环境变化事件、古气候演变的良好载体。该文阐述了硬质粘土层的一般特征、成因以及在粒度、地球化学元素、年代学、沉积环境等方面的研究进展,并展望了硬质粘土层在年代、物质来源和沉积环境等方面的研究方向,认为黄河三角洲硬质粘土层研究较少,需要开展大范围的、系统深入的、多学科的宏观和微观综合分析,挖掘硬质粘土层蕴含的古环境意义和应用价值。  相似文献