桥梁隔震体系振动台试验研究(III)——测试结果分析     

张俊平  周福霖  廖蜀樵 《地震工程与工程振动》2002,(2)

根据前文所述的测试结果 ,本文主要分析了隔震构造、橡胶支座水平刚度、地震输入频谱特性、地震烈度、输入方向、桥墩高度、桥墩嵌固程度等因素对隔震效果的影响 ,揭示了隔震体系耗散地震能量输入的机理 ,所得出的结论对工程实践具有指导意义。  相似文献   

导管架式海洋平台结构阻尼隔振体系及其减振效果分析   总被引：10，自引：2，他引：10  

欧进萍  龙旭  肖仪清  吴斌 《地震工程与工程振动》2002,22(3):115-122

导管架式海洋平台结构是当前应用最广的一种平台结构形式。本文研究导管架式海洋平台结构阻尼隔振体系及其减振效果。针对导管架式海洋平台结构的型式与特点，为了充分发挥阻尼器的耗能减振作用，提出了在平台结构导管架端帽和甲板之间设置柔性阻尼层的新型阻尼隔振方案。针对渤海JZ20－2MUQ平台结构，建立了海洋平台结构阻尼隔振体系简化计算模型，研究了隔振层参数与结构阻尼比的关系以及它们对结构整体和隔振层层间相对位移的控制效果；进行了多种冰荷载工况和地震工况的数值模拟。结果表明，阻尼隔振方案是导管架式海洋平台结构的一种有效的减振措施。  相似文献   

Morphological variation and reproductive biology of Polaskia chende (Cactaceae) under domestication in Central Mexico     

Martha Cruz  Alejandro Casas 《Journal of Arid Environments》2002,51(4):561

The columnar cactus Polaskia chende, endemic to Central Mexico, occurs in the wild and in silviculturally managed populations where artificial selection for better edible fruits operates by sparing and favouring desirable phenotypes during vegetation clearance. Wild and managed populations were compared in morphology and reproductive biology to analyse if human selection has influenced phenotypic divergence, if it has modified breeding systems and if reproductive isolation exists between them. Fruits from managed populations were larger (6·36±0·17 cm³), heavier (19·62±1·32), sweeter (9·07±0·25 °Brix), and with thinner peel (2·09±0·13 mm) than those from wild populations (5·77±0·18 cm³, 15·73±0·85 g, 8·23±0·31 °Brix, and 2·58±0·14 mm, respectively). Both population types bloom synchronically, show diurnal anthesis, with bees as the most likely pollinators, and have breeding system predominantly self-incompatible. Spatial and temporal barriers to pollen exchange between wild and managed populations are unlikely, and morphological differences would be related with an ongoing process of artificial selection.  相似文献   

Introduction of structural aseismic research in China in recent four years     

罗奇峰  石春香  曹炳政  杨树龙  熊华  李仕栋 《地震学报(英文版)》2003,16(6):656-675

Introduction Greeting the coming of the 21st century, Professor HU Yu-xian and other Chinese scholars briefed the trend of earthquake engineering in China and aboard (HU, 1999; HU, ZHOU, 1999). The experiences and lessons learning from the destructive earthquakes in China and abroad in re-cent years, the damage action of the large velocity impulse in ground motion in near field in seis-mic design, numerous earthquake examples show that there are many weaknesses in aspects of earthquake p…  相似文献   

Design of efficient base isolation for hammers and presses     

Abdul Ghafar Chehab  M. Hesham El Naggar   《Soil Dynamics and Earthquake Engineering》2003,23(2):127-141

Foundations supporting hammers and presses have to withstand powerful short-period impact loads. When designing these foundations, their vibration amplitudes and the forces transmitted to the supporting piles or soil medium must be reduced to meet serviceability and stability requirements. Mounting systems are often used to achieve this goal. The objectives of this paper are to investigate the efficiency of mounting systems for different foundation configurations and to provide practical guidance for their design. A comprehensive parametric study was conducted and the results were used to establish a set of charts for the design of efficient mounting systems.  相似文献   

Nonlinear Rate Dependent Model of High Damping Rubber Bearing     

Robert Jankowski 《Bulletin of Earthquake Engineering》2003,1(3):397-403

The accurate analysis of the response of isolated structures requires the application of appropriate models of isolation devices. The purpose of this paper is to analyse a nonlinear strain rate dependent model of a high damping rubber bearing which simulates the horizontal behaviour of the device under specified vertical load using a nonlinear elastic spring-dashpot element. The effectiveness of the model is checked by fitting the experimental data concerning three different rubber bearings. The results of the study show that the model can simulate the bearing behaviour over a wide shear strain range with small simulation errors. This revised version was published online in July 2006 with corrections to the Cover Date.  相似文献   

Seismic response predictions of multi‐span steel bridges through pushover analysis     

Yi Zheng  Tsutomu Usami  Hanbin Ge 《地震工程与结构动力学》2003,32(8):1259-1274

In the new trend of seismic design methodology, the static pushover analysis is recommended for simple or regular structures whilst the time‐history analysis is recommended for complex structures. To this end, the applicable range of the pushover analysis has to be clarified. This study aims at investigating the applicability of pushover analysis to multi‐span continuous bridge systems with thin‐walled steel piers. The focus is concentrated on the response demand predictions in longitudinal or transverse directions. The pushover analysis procedure for such structures is firstly summarized and then parametric studies are carried out on bridges with different types of superstructure‐pier bearing connections. The considered parameters, such as piers' stiffness distribution and pier–0.5ptdeck stiffness ratio, are varied to cover both regular and irregular structures. Finally, the relation of the applicability of pushover analysis to different structural formats is demonstrated and a criterion based on the higher modal contribution is proposed to quantitatively specify the applicable range. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Efficiency of base isolation systems in structural seismic protection and energetic assessment     

Giuseppe Carlo Marano  Rita Greco 《地震工程与结构动力学》2003,32(10):1505-1531

This paper concerns the seismic response of structures isolated at the base by means of High Damping Rubber Bearings (HDRB). The analysis is performed by using a stochastic approach, and a Gaussian zero mean filtered non‐stationary stochastic process is used in order to model the seismic acceleration acting at the base of the structure. More precisely, the generalized Kanai–Tajimi model is adopted to describe the non‐stationary amplitude and frequency characteristics of the seismic motion. The hysteretic differential Bouc–Wen model (BWM) is adopted in order to take into account the non‐linear constitutive behaviour both of the base isolation device and of the structure. Moreover, the stochastic linearization method in the time domain is adopted to estimate the statistical moments of the non‐linear system response in the state space. The non‐linear differential equation of the response covariance matrix is then solved by using an iterative procedure which updates the coefficients of the equivalent linear system at each step and searches for the solution of the response covariance matrix equation. After the system response variance is estimated, a sensitivity analysis is carried out. The final aim of the research is to assess the real capacity of base isolation devices in order to protect the structures from seismic actions, by avoiding a non‐linear response, with associated large plastic displacements and, therefore, by limiting related damage phenomena in structural and non‐structural elements. In order to attain this objective the stochastic response of a non‐linear n‐dof shear‐type base‐isolated building is analysed; the constitutive law both of the structure and of the base devices is described, as previously reported, by adopting the BWM and by using appropriate parameters for this model, able to suitably characterize an ordinary building and the base isolators considered in the study. The protection level offered to the structure by the base isolators is then assessed by evaluating the reduction both of the displacement response and the hysteretic dissipated energy. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Comparative study of the inelastic response of base isolated buildings   总被引：1，自引：0，他引：1  

Daniel Ordoez  Dora Foti  Luis Bozzo 《地震工程与结构动力学》2003,32(1):151-164

This article presents a numeric comparative study of the inelastic structural response of base isolated buildings. The comparative study includes the following isolation systems: laminated rubber bearings, New Zealand one, pure friction and the frictional pendulum ones. The study is based on obtaining non‐linear response spectra for various design parameters using six earthquake records. Usually the base isolation of a new building seeks to maintain the structure in the linear elastic range. The response of old weak buildings or the response of new ones subjected to extreme earthquakes may not be, necessarily, in the aforementioned ideal elastic range. Consequently, it is important to characterize the response of isolated buildings responding inelastically. A conclusion from this research is that the isolators affect significantly the structural response of weak systems. Rubber isolators seem slightly less sensitive to plastification that may occur in the structure compared to friction isolators. Ductility demands in the structure are affected significantly by friction and neoprene protected systems, in particular sliding ones where larger demands are obtained. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

采用基础摩擦隔震房屋高宽比限值的研究   总被引：12，自引：3，他引：12  

李宏男  王苏岩 《地震工程与工程振动》1997,17(3):73-76

大量的试验结果和地震经验表明，采用基础隔震方法能有效地提高建筑物的抗震能力，但建筑物的高度在什么范围，即建筑物的高宽比在什么范围内才适合采用这种方法，仍然是一个有待解决的课题。本文对采用基础滑移隔震多层砌体房屋在实际地震作用下的抗倾覆高宽比限值进行了研究，利用Ｗｉｌｓｏｎ－θ数值积分方法计算，得到了多层砌体房屋的高宽比限值的统计值。其数值结果可供编制建筑隔震设计规程参考。  相似文献