位错模式反演的算法研究   总被引：1，自引：0，他引：1  

李爽  许才军  王新洲 《大地测量与地球动力学》2003,23(1):53-57

综述了大地测量反演算法的发展状况，详细介绍了模拟退火，随机耗费和区间算法等3种优化方法，并基于位错模式，采用模拟的重力测量观测数据，比较了3种算法的反演效果，结果表明：模拟退火法优于随机耗费法，而区间算法的可靠性又优于模拟退火法，区间算法是最可靠的反演方法。  相似文献   

Magnetotelluric appraisal using simulated annealing   总被引：1，自引：0，他引：1  

S. E. Dosso  D. W. Oldenburg 《Geophysical Journal International》1991,106(2):379-385

  相似文献   

BPSA混合策略在GPS高程拟合中的应用   总被引：2，自引：1，他引：1  

范千  王新洲  朱轶群 《测绘工程》2006,15(2):9-11

针对误差反向传播(BP)算法训练速度慢和易于陷入局部最小值的缺点,利用BP算法监督学习特点,模拟退火算法(SA)在局部极小处的概率突变性,有效结合BP和SA算法,提出一种BPSA混合学习策略。将其应用于GPS高程拟合,并以实例验证了该算法的有效性。  相似文献   

风暴尺度天气下利用集合卡尔曼滤波模拟多普勒雷达资料同化试验I.不考虑模式误差的情形   总被引：11，自引：8，他引：3  

兰伟仁  朱江  Ming XUE 《大气科学》2010,34(3):640-652

本文在假定模式无偏差的情况下, 利用一次风暴过程的模拟多普勒雷达资料进行一系列风暴天气尺度的集合卡尔曼滤波资料同化试验, 检验集合卡尔曼滤波在风暴天气尺度资料同化方面的效果, 并验证各集合卡尔曼滤波参数对同化效果的影响。试验结果表明, 集合卡尔曼滤波能有效地应用于风暴尺度的资料同化; 40个集合成员以及6 km的局地化尺度能较好地滤除采样误差造成的虚假相关, 同时可以将观测信息传递到无观测的模式格点; 利用背景场加上空间平滑的高斯型随机扰动生成初始成员的方式较未经过平滑的方式有更好的分析效果; 背景场扰动方法能够提高样本的离散度; 只同化反射率的同化试验表明, 反射率的同化效果较明显, 也证明了集合卡尔曼滤波在非常规资料同化中的作用; 增加径向风资料同化的效果优于只进行反射率同化的结果。  相似文献   

Estimating economic losses of midrise reinforced concrete shear wall buildings in sedimentary basins by combining empirical and simulated seismic hazard characterizations     

Pouria Kourehpaz  Carlos Molina Hutt  Nasser A. Marafi  Jeffrey W. Berman  Marc O. Eberhard 《地震工程与结构动力学》2021,50(1):26-42

Studies of recorded ground motions and simulations have shown that deep sedimentary basins can greatly increase the intensity of earthquake ground motions within a period range of approximately 1–4 s, but the economic impacts of basin effects are uncertain. This paper estimates key economic indicators of seismic performance, expressed in terms of earthquake‐induced repair costs, using empirical and simulated seismic hazard characterizations that account for the effects of basins. The methodology used is general, but the estimates are made for a series of eight‐ to 24‐story residential reinforced concrete shear wall archetype buildings in Seattle, WA, whose design neglects basin effects. All buildings are designed to comply with code‐minimum requirements (i.e., reference archetypes), as well as a series of design enhancements, which include (a) increasing design forces, (b) decreasing drift limits, and (c) a combination of these strategies. As an additional reference point, a performance‐based design is also assessed. The performance of the archetype buildings is evaluated for the seismic hazard level in Seattle according to the 2018 National Seismic Hazard Model (2018 NSHM), which explicitly considers basin effects. Inclusion of basin effects results in an average threefold increase in annualized losses for all archetypes. Incorporating physics‐based ground motion simulations to represent the large‐magnitude Cascadia subduction interface earthquake contribution to the hazard results in a further increase of 22% relative to the 2018 NSHM. The most effective of the design strategies considered combines a 25% increase in strength with a reduction in drift limits to 1.5%.  相似文献   

块状岩石矿物组分热红外光谱反演实验研究     

李天子  王晓华  赵晨光 《测绘科学》2017,(12):190-194

针对地面研究用岩石的热红外光谱反演其矿物组分过程中,由于自然岩石内矿物组分分布不均匀,给确定观测区域内矿物组分的精确值造成困难的问题,该文采用块状矿物拼接的方法模拟自然岩石,使模拟岩石的矿物组分可以精确获取。进一步,针对模拟岩石制订旋转试样法观测方案,从理论上研究该方案存在的观测误差,并通过光谱解混验证其观测精度。  相似文献   

利用模拟退火法反演大陆地震位置     

窦立婷  成诚  李云  胡代明 《地震地磁观测与研究》2017,39(1):31-35

为了精确得到大陆地震震源位置,利用模拟退火法对大陆地震参数进行反演,并对改变算法中相关参数后的反演结果进行分析,表明反演精度受降温速度和收敛阈值的影响较大,初始温度只影响迭代次数,模拟退火法在对模型参数进行全局搜索情况下能获得质量较好的最优解。  相似文献   

模拟退火粒子群与小波的地基沉降预测应用     

吴瑞海  贺军衔  段琪庆  董吉文 《测绘科学》2010,35(6)

针对粒子群优化算法易陷入局部极小值问题,改进学习因子使其自适应调整,并与具有良好全局搜索能力的模拟退火算法结合,充分利用两种算法各自的优点,同时结合小波分析去噪,优化神经网络参数,对地基累计沉降数据进行预测,并与标准粒子群优化算法做了对比,实验表明两种方法的结合具有良好的全局和局部搜索能力,预测精度高。  相似文献   

Separation of PP- and PS-wave reflected seismic data using two-dimensional finite offset common-reflection-surface traveltime approximation     

Raphael Di Carlo Silva dos Santos  João Carlos Ribeiro Cruz  Manuel de Jesus dos Santos Costa 《Geophysical Prospecting》2020,68(7):2046-2063

Recently, the interest in PS-converted waves has increased for several applications, such as sub-basalt layer imaging, impedance estimates and amplitude-versus-offset analysis. In this study, we consider the problem of separation of PP- and PS-waves from pre-stacked multicomponent seismic data in two-dimensional isotropic medium. We aim to demonstrate that the finite-offset common-reflection-surface traveltime approximation is a good alternative for separating PP- and PS-converted waves in common-offset and common shot configurations by considering a two-dimensional isotropic medium. The five parameters of the finite-offset common-reflection-surface are firstly estimated through the inversion methodology called very fast simulated annealing, which estimates all parameters simultaneously. Next, the emergence angle, one of the inverted parameters, is used to build an analytical separation function of PP and PS reflection separation based on the wave polarization equations. Once the PP- and PS-converted waves were separated, the sections are stacked to increase the signal-to-noise ratio using the special curves derived from finite-offset common-reflection-surface approximation. We applied this methodology to a synthetic dataset from simple-layered to complex-structured media. The numerical results showed that the inverted parameters of the finite offset common-reflection-surface and the separation function yield good results for separating PP- and PS-converted waves in noisy common-offset and common shot gathers.  相似文献   

基于模拟退火算法的设计反应谱标定方法     

谭启迪  薄景山  常晁瑜  韩昕  乔峰 《地震工程与工程振动》2020,(1):155-161

反应谱的标定是抗震设计的基础工作之一,模拟退火算法是基于模拟固体退火过程而提出的多参数优化组合方法。本文提出将模拟退火算法应用于设计反应谱的标定,并概述了模拟退火算法的基本原理及特点,介绍了运用MATLAB基于模拟退火算法对反应谱进行标定的过程。检验了将模拟退火算法应用于场地相关谱标定的可行性和合理性,给出了将其应用于工程场地地震安全性评价中设计反应谱标定实例。通过检验和实例分析可以看出,基于模拟退火算法的反应谱标定方法所给出的设计反应谱谱形真实地反映了原地震反应谱的特征,较客观的反映了场地相关反应谱的峰值和周期特征。  相似文献