Methodology for preliminary assessment of Natech risk in urban areas   总被引：1，自引：0，他引：1  

Ana Maria Cruz  Norio Okada 《Natural Hazards》2008,46(2):199-220

Concern for natural hazard-triggered technological disasters (Natech disasters) in densely populated and industrialized areas is growing. Residents living in urban areas subject to high natural hazard risk are often unaware of the potential for secondary disasters such as hazardous materials releases from neighboring industrial facilities, chemical storage warehouses or other establishments housing hazardous materials. Lessons from previous disasters, such as the Natech disaster during the Kocaeli earthquake in Turkey in 1999 call for the need to manage low frequency/high consequence events, particularly in today’s densely populated areas. However, there is little guidance available on how local governments and communities can assess Natech risk. To add to the problem, local governments often do not have the human or economic resources or expertise to carry out detailed risk assessments. In this article, we propose a methodology for preliminary assessment of Natech risk in urban areas. The proposed methodology is intended for use by local government officials in consultation with the public. The methodology considers possible interactions between the various systems in the urban environment: the physical infrastructure (e.g., industrial plants, lifeline systems, critical facilities), the community (e.g., population exposed), the natural environment (e.g., delicate ecosystems, river basins), and the risk and emergency management systems (e.g., structural and nonstructural measures). Factors related to vulnerability and hazard are analyzed and qualitative measures are recommended. Data from hazardous materials releases during the Kocaeli, Turkey earthquake of August 17, 1999 are used as a case study to demonstrate the applicability of the methodology. Limitations of the proposed methodology are discussed as well as future research needs.

Norio OkadaEmail:

  相似文献   

陆面过程中稳定水同位素逐日变化的数学模拟——引入稳定同位素效应的CLM实例分析     

章新平  王晓云  牛国跃  杨宗良  黄一民  张剑明 《冰川冻土》2008,30(1):100-107

将稳定同位素效应引入CLM(Community Land Model),并对巴西马瑙斯站在平衡年的稳定水同位素的逐日变化进行模拟和分析.结果表明: 降水、水汽和地表径流中δ18O存在明显的季节变化,并与相应的水量存在显著的负相关关系,但凝结物中δ18O与地面凝结量存在显著的正相关关系,蒸发水汽中δ18O与蒸发量之间无显著的相关关系.受土壤贮水削峰功能的影响,表层土壤和根区水中δ18O的季节变化全无.植被层蒸发水汽中稳定同位素的丰度与大气的干湿程度存在密切联系: 当降水量少时,大气干燥,植被层的蒸发较少,植被蒸发中δ18O较高;当降水量较大时,空气湿润,植被层的蒸发量较大,蒸发中δ18O则较低.植被蒸腾中δ18O的变化与源区水体中δ18O的变化保持一致,尤其是与根区水中的δ18O.由于地下径流直接源自根区水的补充,因此,地下径流中δ18O等于根区水中的δ18O.模拟结果还显示,降水MWL (大气水线)的梯度项和常数项均比全球平均MWL略偏小.尽管主要来自降水的贡献,但地表径流和植被层水体的MWLs与降水MWL存在较大的差异,这一方面与两类水体在蒸发过程中的稳定同位素的富集作用有关,另一方面与CLM模拟的水量有关.大气水汽线与降水的MWL的梯度值相近,说明大气水汽与降水近似处于稳定同位素平衡状态.另外,模拟的地面的凝结线与植被层的凝结线均与全球大气水线相近,且具有非常高相关程度,说明CLM的模拟是合理的.  相似文献   

乌鲁木齐河流域地下水水质监测网设计   总被引：1，自引：0，他引：1  

朱瑾  霍传英  李和生  弓小平  王俊桃  李文鹏  周仰效 《水文地质工程地质》2008,35(1):12-18

文章运用地下水易污性编图及污染源分布图法进行了乌鲁木齐河流域地下水水质监测网设计。共设计了130监测孔,现有46个监测孔,另需要84个新的监测孔。按监测类型分为面源监测点22个,点源监测点87个,重点水源地与泉水监测点21个。按监测运行分长期监测点55个,流域普查监测点75个。普查监测点监测频率为1次/5年,长期监测点监测频率为1次/年。首期有针对性地在污染严重的柴窝堡新化厂排污区、乌鲁木齐河谷老排污区、米泉污灌区、米泉工业污染区、老龙河污染区取了25个污染水样测试分析,结果显示地下水已经受到严重污染。  相似文献   

含铀物质对有机质生烃的实验研究     

李斌  孟自芳  张百涛  李相博 《矿物学报》2008,28(4)

采用密闭容器水热模拟实验方法,考察含铀物质对有机质热解生烃过程的影响。对热模拟实验产物分析发现,在暗色泥岩和煤岩样品中加入含铀物质后,气态烃和液态烃的生烃量都有比较明显的增加。其中煤岩的气态烃产量平均增加值为34%,而泥岩样品平均增加值也达到了30%以上。液态烃产率分析表明,含铀矿物也促进了泥岩和煤岩的液态烃产率。从泥岩氯仿沥青‘A’族组成分析表明,加入催化剂后泥岩的饱和烃和芳烃在高温阶段具有规律性的明显增大的趋势,反映出非烃和沥青质,甚至不溶有机质向相对稳定的饱和烃转化以及芳烃随演化程度增加的高聚合作用。综合以上分析,认为放射性铀对油气生成具有氧化催化作用。  相似文献   

崎岖列岛附近海域环境质量现状与分析     

施青松  张健 《海洋学研究》2002,20(2):23-30

根据 2 0 0 1年 2月和 7月对崎岖列岛附近海域的水质和底质表层沉积物调查结果 ,采用环境质量单项评价标准指数法 ,对该海域环境质量现状进行了评价与分析。结果表明 :(1 )该海域水质的 p H值、溶解氧和石油类等环境因子基本符合一类海水水质标准 ,化学需氧量、活性磷酸盐和无机氮浓度则超标严重 ,该海域水质已处于严重富营养化状态 (夏季比冬季富营养化程度略低 ) ;(2 )该海域底质表层沉积物中除部分站位的重金属 Cu、 Zn含量超标外 ,有机质、石油类和重金属 Pb、 Cd、 Hg的含量均未超标 ,底质环境状况尚好  相似文献   

Spatial patterns and environmental risks of ringnet fishing along the Kenyan coast     

P Thoya  S Pérez-Jorge  GM Okemwa  H Mwamlavya  A Tuda  N Wambiji 《African Journal of Marine Science》2020,42(1):23-33

Ringnet fishing began in the early 20th century and is practised worldwide, mainly to target nearshore pelagic species. The method was introduced to Kenya’s coastal waters by migrant fishers from Tanzania. However, the impacts of this fishing gear remain poorly assessed. We assessed the spatial distribution of ringnet fishing effort and its possible effects on ecosystem components, such as coral reefs, marine megafauna and marine protected areas, on the south coast of Kenya. We tracked 89 ringnet fishing trips made from December 2015 to January 2016 and used spatial multicriteria analysis to determine hotspots of possible environmental risks. The results showed that habitat type and bathymetric profile influenced the spatial distribution of ringnet fishing effort. Mixed seagrass and coral habitats had the highest concentration of the effort. Most of the habitats in the study area were moderately exposed to the impacts of the ringnet fishery. The study identifies high-risk areas that require spatial measures to minimise possible environmental risks of the gear both to habitats and to endangered sea turtles.  相似文献   

Weighting of acoustic- and trawl-survey indices for the assessment of North Sea herring   总被引：1，自引：2，他引：1  

Simmonds  E.J 《ICES Journal of Marine Science》2003,60(3):463-471

  相似文献   

象山港沉积物类型变化及沉积环境现状评价   总被引：1，自引：0，他引：1  

张海波  蔡燕红  叶慧明  项有堂  周占平 《海洋学研究》2007,25(4):51-58

根据2002年6~7月对象山港进行生态调查所获得的资料,评价了象山港水域的沉积物类型变化和沉积环境质量状况,结果表明:与20世纪80年代相比,象山港沉积物类型已发生了较大的变化,由80年代的粉砂质粘土、粘土质粉砂、粘土-粉砂-砂及砾砂4种沉积物类型变为2002年的粉砂质粘土、砂、砂-粉砂、粘土-砂、砂-粉砂-粘土、中细砂、中砂7种沉积物类型。象山港沉积物的质量良好,底质中总氮的含量较高,普遍出现超标现象;部分测站的多氯联苯(PCB)略有超标,各测站总磷硫化物、有机质、石油类等指标均符合一类标准。  相似文献   

渤海湾表层沉积物重金属与污染评价   总被引：10，自引：2，他引：10       下载免费PDF全文

秦延文  苏一兵  郑丙辉  张雷  万峻 《海洋科学》2007,31(12):28-33

用原子吸收法测定了渤海湾表层沉积物中重金属的含量,同时用2种评价方法对该海域底质环境进行了评价。结果表明:沉积物中汞、锌含量平均值超过标准,其余项目未发现超标;其分布特征由于受沿岸不同污染源的污染影响,重金属污染物难以形成一定规律的分布状态。同时该海域底质环境质量总指数已达到污染程度和很强的生态危害,其中主要污染元素是Hg,已达重污染,并形成极强的生态危害。  相似文献   

水下运载器外挂负载的系统测试方案及仿真     

杨洪刚  连琏  葛彤 《海洋工程》2006,24(1):60-67

研究水下运载器外挂负载的测试问题,根据负载功能,建立了负载的系统模型。考虑到系统可测性,模型中增设一些辅助元件和电路,测试计算机通过与负载的自动驾驶计算机通讯,由自动驾驶计算机施加激励和采集响应,完成测试。最后,对测试方案进行了仿真试验,并分析了仿真结果。  相似文献