Feasibility of signal enhancement with multiple grounded‐wire sources for a frequency‐domain electromagnetic survey          下载免费PDF全文

Haigen Zhou  Yao Yao  Changsheng Liu  Jun Lin  Lili Kang  Gang Li  Xinsen Zeng 《Geophysical Prospecting》2018,66(4):818-832

Frequency‐domain electromagnetic methods with a grounded‐wire source are powerful tools in geophysical exploration. However, the signal may be too weak to guarantee the quality of survey data in complex electromagnetic environments, especially when the receiver is located in the air for the newly developed grounded‐source airborne frequency‐domain electromagnetic method. In this paper, a signal enhancement method with multiple sources is proposed to solve this problem. To evaluate the signal enhancement effect, we compared the signals generated by a single source and multiple sources with equal electric moment. The signal differences caused by synchronisation error and separation distance between source elements were analysed, and the methods to achieve maximum signal were introduced. Besides, we discussed the interaction between adjacent source elements to ensure the system safety, including the changes in output current and the safe distance between two sources using a dual‐source model. Lastly, a comprehensive field experiment was designed and conducted to test the multiple‐source method. The data processing results are comparable for single and dual sources, and the signal‐to‐noise ratio of dual source is higher in the field test. The subsurface resistivity structure at the test site is consistent with the previous controlled‐source audio‐frequency magnetotellurics method. These results show that signal enhancement with multiple sources is feasible. This study provides guidance to the application of multiple sources in field surveys when the survey environment is complex and rigorous.  相似文献   

A study of the geophysical response of distributed fibre optic acoustic sensors through laboratory‐scale experiments          下载免费PDF全文

Bence Papp  Daniela Donno  James E. Martin  Arthur H. Hartog 《Geophysical Prospecting》2017,65(5):1186-1204

In the past few years, distributed acoustic sensing has gained great interest in geophysics. This acquisition technology offers immense improvement in terms of efficiency when compared with current geophysical acquisition methods. However, the fundamentals of the measurement are still not fully understood because direct comparisons of fibre data with conventional geophysical sensors are difficult during field tests. We present downscaled laboratory experiments that enabled us to characterise the relationship between the signals recorded by conventional seismic point receivers and by distributed fibre optic sensors. Interrogation of the distributed optical fibre sensor was performed with a Michelson interferometer because this system is suited to compact test configurations, and it requires only a very simple data processing workflow for extracting the signal outputs. We show acoustic data that were recorded simultaneously by both the fibre optical interferometer and conventional three‐component accelerometers, thus enabling the comparison of sensor performance. We present results focused on the directionality of fibre measurements, on the amplitude variation with angle of incidence, and on the transfer function that allows accelerometer signals to be transformed into optical fibre signals. We conclude that the optical fibre response matches with the array of the displacement differences of the inline accelerometers deployed along the fibre length. Moreover, we also analysed the influence of various types of coupling and fibre cable coating on the signal responses, emphasising the importance of these parameters for field seismic acquisitions when using the distributed fibre optic technology.  相似文献   

高铁震源地震信号的挤压时频分析应用          下载免费PDF全文

王晓凯  陈文超  温景充  宁杰远  李嘉琪 《地球物理学报》2019,62(6):2328-2335

我国每天有数千趟高铁列车驰骋在纵横交错的高铁线路上,构成了十分理想的均布震源,但寻找适合高铁震源地震信号的处理方法是充分挖掘信息的关键.传统的频谱分析结果表明高铁震源所产生的地震信号具有明显的窄带分立谱特征,但无法精确获得高铁震源地震信号的时频变化规律.本文首次将挤压时频分析这种分析工具引入到高铁震源地震信号处理中,对中国南方某高铁沿线采集到的高铁震源地震数据进行了分析.处理结果表明:利用挤压时频分析能够更加精确地刻画频率成分随时间的变化,能够利用单检波器精确刻画高铁列车的运行状态(匀速、加速等);同时利用挤压时频变换还可高精度地重构出所需频带的信号,为提取高铁震源地震信号的特征成分提供了一种有力工具.  相似文献   

基于LWPC和IRI模型的NWC台站信号传播幅度建模分析   总被引：2，自引：0，他引：2       下载免费PDF全文

易娟  顾旭东  李志鹏  林仁桐  蔡毅徽  陈隆  倪彬彬  乐新安 《地球物理学报》2019,62(9):3223-3234

频率为3~30 kHz的甚低频（VLF,Very Low Frequency）电磁波具有波长长、传播距离远的特点,能够沿地面-低电离层波导进行传播,在通信、导航等许多领域都被广泛应用.基于波导模理论的长波传播模型（LWPC,Long-Wavelength Propagation Capability）能够用于计算甚低频波的传播路径及幅度,进而研究耀斑、磁暴、地震等事件对电离层的扰动.本文利用国际电离层参考模型（IRI,International Reference Ionosphere）对LWPC中电子密度和碰撞频率进行改进,并将模拟结果与武汉大学VLF接收机实际观测到的NWC （North West Cape）台站信号幅度进行比较分析,结果表明改进后LWPC模型得到的幅度及变化趋势与实际值更加接近.LWPC模型给出的电子密度与IRI模型得到的电子密度在日间基本一致,但是在夜间存在差异,造成夜间部分区域NWC台站信号幅度的差异性,验证了电离层电子密度对于VLF信号传播具有的重要影响.传播路径上的晨昏变化也可以引起VLF信号幅度分布的突变,在日出和日落时间段内存在明显的过渡区域.基于IRI模型的LWPC,改善了VLF电波传播过程的预测分析效果,提供了一种长波导航通信质量的评估方法.  相似文献   

基于OH全天空气辉成像仪观测的中国低纬地区的重力波传播统计特征   总被引：2，自引：2，他引：2       下载免费PDF全文

王翠梅  李钦增  徐寄遥  袁韡  刘伟军  孙龙昌  陈金松  燕春晓 《地球物理学报》2014,57(11):3659-3667

利用位于海南富克(19.5°N,109.1°E)和广西桂平(23.4°N,110.1°E)两个台站两年多的OH全天空气辉成像仪观测数据,对中国低纬地区的重力波传播统计特征进行了研究.从富克和桂平的气辉成像观测中, 分别提取了65和86个重力波事件.研究结果表明,观测水平波长,观测周期和水平相速度分别集中分布在10~35 km, 4~14 min和20~90 m·s^-1范围.重力波传播方向,在夏季表现出很强的东北方向传播.然而,在冬季主要沿东南和西南方向传播. 同时,结合流星雷达风场观测和TIMED/SABER卫星的温度数据,也发现在中层-低热层中传播的大多数重力波表现为耗散传播.且低层-中层大气中背景风场的滤波作用和多普勒频移可能对纬向方向传播的重力波产生的各向异性起到重要的调制作用.然而,经向方向传播的重力波产生的各向异性可能同时被低层大气中波源的非均匀分布以及潮汐变化所影响.  相似文献   

井喷关井水击分析及水击波速计算          下载免费PDF全文

史富全 《探矿工程》2020,47(11):37-43

油气井发生溢流或井喷后,立即关闭防喷器,关井期间防喷器需经受关井产生的水击压力作用。本文在对井喷关井水击的传播物理特征分析的基础上,推导直接关井水击压力计算公式,综合考虑井筒流体含气率、气液两相流型、固相类型等对水击波速的影响,推导水击波在气、液、固三相混合流体中传播速度计算公式,并通过算例对水击波速影响因素进行分析。计算表明水击波速对含气率变化非常敏感,钻井液含气率在0～0.001的时候,水击波速几乎是发生了突变,水击波速在含气率为0.001时仅为385 m/s,相比纯钻井液情况下降了67%,而钻井液固相含量、套管的内径和壁厚对水击波传播速度影响较小。  相似文献   

基于融和算法的二维Delaunay三角网任意点定位研究     

张咏  刘长星  杨瑜华  董汉军 《测绘科学》2010,35(2):85-87,84

二维Delaunay三角网中任意点定位的快慢是影响整个内插构网速度的关键因素。针对目前各种算法还不能在定位速度和穿越路径惟一性之间达到一个有效平衡,本文从计算机实现角度出发,将三角形面积坐标、重心和点与有向线段的关系三者有机结合,构建出一种新的点定位算法。算法定位路径惟一,速度快,是一种健壮高效的最短路径定位算法。  相似文献   

乌拉嘎金矿床地质地球化学特征研究   总被引：8，自引：3，他引：5  

王永祥  吴国学  白士俊  韩洪伟  吕志刚  汪振涌 《世界地质》2005,24(4):338-343

乌拉嘎金矿矿体赋存于燕山晚期的斜长花岗斑岩与黑龙江群下亚群接触带附近的近东西向展布的构造角砾岩中,围岩蚀变强烈;金矿化主要受角砾岩带控制。矿床成矿微量元素组合为Au、Hg、As、Sb,且含量均呈向下递增的趋势。LaN／YbN值变化范围为14．146～28．311,稀土元素配分模式为右倾的轻稀土富集型;∑LREE：165．76～62．68;∑HREE：45．82～15．2;LREE／HREE为6．09～4．124,为轻稀土富集型。岩体中流体包裹体以低盐、低压且有天水加入为特征,为典型的浅成低温热液型矿床。  相似文献   

贵州荔波地区2000年来石笋高分辨率的气候记录   总被引：10，自引：1，他引：9  

张美良  程海  林玉石  覃嘉铭  朱晓燕  冉景丞  杨琰  陈会明  Edwards R L 《沉积学报》2006,24(3):339-348

通过对荔波董哥洞石笋进行高精度的ICP MS或TIMS U系测年和碳、氧同位素分析,建立了荔波地区2 300a B.P.来高分辨率的古气候变化的时间序列。研究结果表明,贵州荔波地区2 300a B.P.以来石笋记录的季风气候变化,大致可分为8个气候(亚)期:① 2 300～1 800a B.P.为降温期,显示东亚夏季风减弱,东亚冬季风增强,气候干旱寒冷;② 1 800～1 080a B.P.气温有所回升,显示东亚冬季风缓慢减弱,东亚夏季风有所回升,表现为半湿润的温凉气候期;③ 1 080～680a B.P. 为降温期,气温再次下降,显示东亚冬季风再次增强,但降水相对增大,表现为寒冷湿润的气候期,是气候变化的关键转折时期;④ 680～550a B.P.温暖期,显示东亚夏季风再次增强,气温升高,降水增大,表现为温暖湿润的气候期。⑤ 550～400a B.P.寒冷期,显示东亚冬季风快速增强,气温下降,表现为寒冷湿润的气候环境,是近1 000年以来最冷的时期;⑥ 400～364a B.P.温凉期,显示东亚夏季风有所增强,气温有所回升,表现为温凉湿润气候环境;⑦ 364～324a B.P.冷凉期,显示东亚夏季风有所减弱,气温有所下降,表现为冷凉湿润气候环境;⑧ 324a B.P.至今,气候相对波动期,同位素记录曲线呈锯齿状波动,在其内包括若干个冷凉半湿润、冷湿的气候变化亚阶段。根据荔波董哥洞石笋的高分辨率的古气候变化的连续记录,揭示了荔波地区2 300a B.P.以来的一些百年尺度的重大气候事件——干旱寒冷期、隋唐温暖期(或小温暖期)、小寒冷期以及一些十年尺度的降水、温度变化。石笋记录的这种百年、十年尺度的突发性气候变化事件,与冰芯记录极为相似,反映低纬度地区石笋记录的季风气候与高纬度及北极地区的气候具有极好的相关性,这对于认识现代气候系统变化以及对未来十年—百年尺度的气候预测和演化的驱动机制,具有重要的科学意义。  相似文献   

A high accurate automated first-break picking method for seismic records from high-density acquisition in areas with a complex surface     

Yinpo Xu  Cheng Yin  Xuefeng Zou  Yudong Ni  Yingjie Pan  Liangjun Xu 《Geophysical Prospecting》2020,68(4):1228-1252

As the application of high-density high-efficiency acquisition technology becomes more and more wide, the areas with complex surface conditions gradually become target exploration areas, and the first-break picking work of massive low signal-to-noise ratio data is a big challenge. The traditional method spends a lot of manpower and time to interactively pick first breaks, a large amount of interactive work affects the accuracy and efficiency of picking. In order to overcome the shortcoming that traditional methods have weak anti-noise to low signal-to-noise ratio primary wave, this paper proposes a high accurate automated first-break picking method for low signal-to-noise ratio primary wave from high-density acquisition in areas with a complex surface. Firstly, this method determines first-break time window using multi-azimuth spatial interpolation technology; then it uses the improved clustering algorithm to initially pick first breaks and then perform multi-angle comprehensive quality evaluation to first breaks according to the following sequence: ‘single trace → spread → single shot → multiple shots’ to identify the abnormal first breaks; finally it determines the optimal path through the constructed evaluation function and using the ant colony algorithm to correct abnormal first breaks. Multi-azimuth time window spatial interpolation technology provides the base for accurately picking first-break time; the clustering algorithm can effectively improve the picking accuracy rate of low signal-to-noise ratio primary waves; the multi-angle comprehensive quality evaluation can accurately and effectively eliminate abnormal first breaks; the ant colony algorithm can effectively improve the correction quality of low signal-to-noise ratio abnormal first breaks. By example analysis and comparing with the commonly used Akaike Information Criterion method, the automated first-break picking theory and technology studied in this paper has high picking accuracy and the ability to stably process low signal-to-noise ratio seismic data, has a significant effect on seismic records from high-density acquisition in areas with a complex surface and can meet the requirements of accuracy and efficiency for massive data near-surface modelling and statics calculation.  相似文献