岩石层流变学的研究现状及存在问题   总被引：3，自引：5，他引：3  

李昶  臧绍先 《地球物理学进展》2001,16(2):99-108

岩石层的流变学是一门综合性的学科，它不仅包括高温高压岩力学实验，而且还包括岩石圈的地质构造，物质组成和温度场特性的研究，70年代以来岩石力学实验和地质热研究的成果推动了岩石层流变学的发展，目前，人们应用已有的实验结果建立了岩石层流变学的剖面，并以此为基础讨论了许多大地构造现象，但是，人们对流变机制的转换，水对岩石层流变性的影响等问题尚不清楚，因此，为了深入的了解岩石层流变性质在岩石层运动学和动力学中的应用，必须开展岩石层流变机制的理论和实验研究，以便建立流变性质的三维分布，本文主要分析了岩石层的流变性质随深度变化的研究结果及其在实际中的应用，讨论了确定岩石层粘度或流变强度的主要因素并对岩石层的流变学研究方向提供了一些看法。  相似文献   

岩石变形所反映的地震作用过程--第13届国际变形机理、流变学和构造学学术会议概述   总被引：2，自引：0，他引：2  

姚大全 《国际地震动态》2001,(7):9-12

简要介绍了第13届国际变形机理、流变学和构造学学术会议的概况和特点，综述了地震变形作用的研究现状。  相似文献   

塔里木盆地岩石层热结构特征   总被引：39，自引：10，他引：39       下载免费PDF全文

王良书  李成 《地球物理学报》1996,39(6):794-803

在大地热流密度分布的基础上，研究了塔里木盆地中库尔勒－若羌和阿克苏－叶城两条剖面岩石层热结构特征．由岩石层Ｐ波速度分布转换成生热率剖面，用二维数值模型获得了岩石层热结构和热状态特征．结果表明，塔里木盆地壳幔边界温度的高低与其埋深密切相关．居里等温面深度大，地幔热流密度较低．岩石层厚度变化与其新生代期间挠曲过程密切相关．在岩石层温度分布基础上，确定了深部脆－韧性过渡带深度和岩石层屈服强度，表明塔里木盆地岩石层相对较冷，且具有刚性的地球动力学特征．  相似文献   

中国大陆余震活动深度分布及其流变学机制   总被引：9，自引：1，他引：9  

傅征祥 《中国地震》1996,12(2):147-154

本文研究了中国大陆１９６６年以来发生的５次大地震（Ｍｓ≥７．０）的余震活动深度与地热流的关系。研究表明，地热流较高的震源区，余震活动深度分布较浅，并且得出余震深度分布受地壳内部岩石脆性－韧性转变深度的流变学特征控制的推论。  相似文献   

The dynamics of a channel-fed lava flow on Pico Partido volcano, Lanzarote     

Duncan Woodcock  Andrew Harris 《Bulletin of Volcanology》2006,69(2):207-215

A short length of channel on Pico Partido volcano, Lanzarote, provides us the opportunity to examine the dynamics of lava flowing in a channel that extends over a sudden break in slope. The 1–2-m-wide, 0.5–2-m-deep channel was built during the 1730–1736 eruptions on Lanzarote and exhibits a sinuous, well-formed channel over a steep (11° slope) 100-m-long proximal section. Over-flow units comprising smooth pahoehoe sheet flow, as well as evidence on the inner channel walls for multiple (at least 11) flow levels, attest to unsteady flow in the channel. In addition, superelevation is apparent at each of the six bends along the proximal channel section. Superelevation results from banking of the lava as it moves around the bend thus causing preferential construction of the outer bank. As a result, the channel profile at each bend is asymmetric with an outer bank that is higher than the inner bank. Analysis of superelevation indicates flow velocities of ~8 m s^–1. Our analysis of the superelevation features is based on an inertia-gravity balance, which we show is appropriate, even though the down-channel flow is in laminar flow. We use a viscosity-gravity balance model, together with the velocities calculated from superelevation, to obtain viscosities in the range 25–60 Pa s (assuming that the lava behaved as a Newtonian liquid). Estimated volume fluxes are in the range 7–12 m³ s^–1. An apparent down-flow increase in derived volume flux may have resulted from variable supply or bulking up of the flow due to vesiculation. Where the channel moves over a sharp break in slope and onto slopes of ~6°, the channel becomes less well defined and widens considerably. At the break of slope, an elongate ridge extends across the channel. We speculate that this ridge was formed as a result of a reduction in velocity immediately below the break of slope to allow deposition of entrained material or accretion of lava to the channel bed as a result of a change in flow regime or depth.  相似文献   

大陆下地壳的研究进展综述   总被引：3，自引：0，他引：3  

孔华  谢窦克 《地球物理学进展》1998,13(4):9-22

大陆下地壳对认识整个地壳的组成演化具有重要意义,对大陆下地壳的研究正在世界范围蓬勃开展,大陆下地壳的研究基于两个方面：一是太古代地壳剖面的研究,二是麻粒岩包体的研究,相比较而言后者的研究程度要难得多,下地壳包体出露少,成分多为麻粒岩,且无一例外地都含有基性麻粒岩,对其成因现基本趋于一致认识,即由幔源岩浆底侵至地壳再受变质而成,然后被火山作用带至地表,因此,基性麻粒岩包体更可能反映了现今大陆下地壳的  相似文献   

THE CONSTITUTIVE RELATION OF DEBRIS FLOW 1     

SHEN Shouchang 《国际泥沙研究》1998,(3)

ＴＨＥＣＯＮＳＴＩＴＵＴＩＶＥＲＥＬＡＴＩＯＮＯＦＤＥＢＲＩＳＦＬＯＷ１ＳＨＥＮＳｈｏｕｃｈａｎｇ２ＡＢＳＴＲＡＣＴＩｎｏｒｄｅｒｔｏｉｎｖｅｓｔｉｇａｔｅｔｈｅｓｔｒｅｓｃｏｎｓｔｉｔｕｔｉｖｅｒｅｌａｔｉｏｎｏｆｄｅｂｒｉｓｆｌｏｗ,ｔｈｅｅｘｐ...  相似文献   

Sea ice volume and age: Sensitivity to physical parameterizations and thickness resolution in the CICE sea ice model     

《Ocean Modelling》2014

New dynamics parameterizations in Version 5 of the Los Alamos Sea Ice Model, CICE, feature an anisotropic rheology and variable drag coefficients. This study investigates their effect on Arctic sea ice volume and age simulations, along with the effects of several pre-existing model options: a parameter that represents the mean cumulative area of ice participating in ridging, the resolution of the ice thickness distribution, and the resolution of the vertical temperature and salinity profiles.By increasing shear stress between floes, the anisotropic rheology slows the ice motion, producing a thicker, older ice pack. The inclusion of variable drag coefficients, which depend on modeled roughness elements such as deformed ice and melt pond edges, leads to thinner ice and a more realistic simulation of sea ice age. Several feedback processes act to enhance differences among the runs. Notably, if less open water is produced mechanically through ice deformational processes, the simulated ice thins relative to runs with more mechanically produced open water. Thermodynamic processes can have opposing effects on ice age and volume; for instance, growth of new ice increases the volume while decreasing the age of the pack. Therefore, age data provides additional information useful for differentiating among process parameterization effects and sensitivities to other model parameters.Resolution of thicker ice types is crucial for proper modeling of sea ice volume, because the volume of ice in the thicker ice categories determines the total ice volume. Model thickness categories tend to focus resolution for thinner ice; this paper demonstrates that 5 ice thickness categories are not enough to accurately resolve the ice thickness distribution for simulations of ice volume.  相似文献   

Large-strain deformation and strain partitioning in polyphase rocks: Dislocation creep of olivine–magnesiowüstite aggregates     

Misha Bystricky  Florian Heidelbach  Steve Mackwell   《Tectonophysics》2006,427(1-4):115

Aggregates composed of olivine and magnesiowüstite have been deformed to large strains at high pressure and temperature to investigate stress and strain partitioning, phase segregation and possible localization of deformation in a polyphase material. Samples with 20 vol.% of natural olivine and 80 vol.% of (Mg_0.7Fe_0.3)O were synthesized and deformed in a gas-medium torsion apparatus at temperatures of 1127 °C and 1250 °C, a confining pressure of 300 MPa and constant angular displacement rates equivalent to constant shear strain rates of 1–3.3 × 10^− 4 s^− 1. The samples deformed homogeneously to total shear strains of up to γ  15. During constant strain rate measurements the flow stress remained approximately stable at 1250 °C while it progressively decreased after the initial yield stress at the lower temperature. Mechanical data, microstructures and textures indicate that both phases were deforming in the dislocation creep regime. The weaker component, magnesiowüstite, controlled the rheological behavior of the bulk material and accommodated most of the strain. Deformation and dynamic recrystallization lead to grain refinement and to textures that were not previously observed in pure magnesiowüstite and may have developed due to the presence of the second phase. At 1127 °C, olivine grains behaved as semi-rigid inclusions rotating in a viscous matrix. At 1250 °C, some olivine grains remained largely undeformed while deformation and recrystallization of other grains oriented for a-slip on (010) resulted in a weak foliation and a texture typical for pure dry olivine aggregates. Both a-slip and c-slip on (010) were activated in olivine even though the nominal stresses were up to 2 orders of magnitude lower than those needed to activate these slip systems in pure olivine at the same conditions.  相似文献   

Application of Greek lignite as an additive for controlling rheological and filtration properties of water–bentonite suspensions at high temperatures: A review     

Vassilios C. Kelessidis  Cassiani Papanicolaou  Antonios Foscolos 《International Journal of Coal Geology》2009,77(3-4):394-400

This review paper presents the results of an extensive study investigating whether addition of 3% w/w Greek lignite to 6.42% w/w water–bentonite suspensions, after being exposed to high temperatures, can prevent gelation and control filtration characteristics. Two different bentonites and eight lignites from different Greek basins have been used while a commercial lignite product has been used as standard. The lignite-free bentonite suspensions heated to 177 °C for 16 h (thermal aging) thicken considerably, increasing the yield stress and the yield point. Fluid consistency and flow behavior indices also change while no significant change is observed for plastic viscosity. Thermal aging of the suspensions results in unacceptably high fluid loss values.Addition of Greek lignite to water–bentonite suspensions, followed by thermal aging, provided the rheological stability of the suspensions by maintaining the low yield stress/point regardless of the type of bentonite. Some of the lignites performed as well as their commercial counterpart. No specific trends for rheological improvement have been identified with respect to various characteristics of lignites such as contents of humic, fulvic acids, humins and other parameters such as specific surface area and cation exchange capacity.Furthermore, addition of lignite in most cases provided very good filtration control of the water–bentonite suspensions after exposure to 177 °C, with some Greek lignites being superior to the commercial product. The same lignite parameters examined for rheological control, were also examined to determine their effect on fluid loss of these suspensions for both bentonites. The content of humic and fulvic acids of two groups of lignites showed weak inverse correlations with the fluid loss volumes for both bentonites, while all other parameters did not seem to directly correlate with the effectiveness of the lignites.  相似文献