Loss of energy dissipation capacity from the deadzone in linear and nonlinear viscous damping devices   总被引：1，自引：1，他引：0  

Mai Tong Thomas Liebner 《地震工程与工程振动(英文版)》2007,6(1):11-20

In a viscous damping device under cyclic loading, after the piston reaches a peak stroke, the reserve movement that follows may sometimes experience a short period of delayed or significantly reduced device force output. A similar delay or reduced device force output may also occur at the damper’s initial stroke as it moves away from its neutral position. This phenomenon is referred to as the effect of “deadzone”. The deadzone can cause a loss of energy dissipation capacity and less efficient vibration control. It is prominent in small amplitude vibrations. Although there are many potential causes of deadzone such as environmental factors, construction, material aging, and manufacture quality, in this paper, its general effect in linear and nonlinear viscous damping devices is analyzed. Based on classical dynamics and damping theory, a simple model is developed to capture the effect of deadzone in terms of the loss of energy dissipation capacity. The model provides several methods to estimate the loss of energy dissipation within the deadzone in linear and sublinear viscous fluid dampers. An empirical equation of loss of energy dissipation capacity versus deadzone size is formulated, and the equivalent reduction of effective damping in SDOF systems has been obtained. A laboratory experimental evaluation is carried out to verify the effect of deadzone and its numerical approximation. Based on the analysis, a modification is suggested to the corresponding formulas in FEMA 356 for calculation of equivalent damping if a deadzone is to be considered.  相似文献   

Estimation of peak relative velocity and peak absolute acceleration of linear SDOF systems     

Jianwei Song Yi-Lun Chu Zach Liang George C. Lee 《地震工程与工程振动(英文版)》2007,6(1):1-10

In the seismic analysis and design of structures, the true velocity and absolute acceleration are usually approximated by their corresponding pseudo-values. This approach is simple and works well for structures with small damping (say, less than 15%). When the damping of a structure is enhanced for the purpose of response reduction, it may result in large analysis and design errors. Based on theory of random vibration and the established mechanism of seismic response spectra analysis, a method is developed (1) to predict the relative velocity spectra with any damping ratio level directly from the 5% standard pseudo-acceleration spectrum; and (2) to estimate the peak absolute acceleration. The accuracy of both is validated by using two selected ensembles of ground motion records.  相似文献   

Reflected and transmitted waves in a channel with side porous mattresses     

Wojciech Sulisz 《Coastal Engineering》2008

The problem of wave propagation and wave damping in a channel with side porous mattresses of arbitrary shape protruding from the walls is studied. The solution was achieved by applying 3-D boundary element method and was employed to study wave field in the channel and to analyze the effect of the geometry of the mattresses and physical and hydraulic properties of porous material on wave damping. The results show that wave damping in the channel strongly depends on wave parameters, especially, on the wave number. Wave reflection and transmission decrease with increasing the wave number. The results also show that the wave field in the channel strongly depends on the geometry of the mattresses as well as on physical and hydraulic properties of porous material used to build these wave dampers. The geometry of the mattresses and physical and hydraulic properties of porous material have a moderate effect on wave reflection and a significant effect on wave transmission. The results show that wave transmission down the channel decreases with increasing the length and thickness of the mattresses. Moreover, wave transmission decreases with increasing the porosity and damping properties of porous media used to build the mattresses. The analysis shows that porous mattresses protruding from the channel walls are very efficient in damping water waves propagating down the channel and may be built in channels to reduce high waves and achieve desired wave conditions. Theoretical results are in reasonable agreement with experimental data.  相似文献   

阻尼器连接填充墙在柔性框架结构中的应用研究     

鲁亮  李远清  赵菲 《地震工程与工程振动》2021,41(1):70-77

阻尼器连接填充墙采用黏滞阻尼器与主体框架结构连接,是一种新型填充墙与框架的柔性连接方式,能满足柔性框架结构的大变形需求.为使得阻尼器连接填充墙达到最优的力学性能,结构布置和构件力学参数的选择十分重要,采用有限元软件ABAQUS分别建立了柔性钢框架结构和阻尼器连接填充墙-框架结构的有限元模型,考察不同阻尼系数阻尼器连接填...  相似文献   

土体动力一维非线性本构关系剖析与评价     

陈学良  金星  陶夏新  康兰池 《地震工程与工程振动》2006,26(6):147-157

土体动力一维非线性本构关系是场地及地基动力响应、土工数值分析的关键。回顾和总结了国内外的发展状况及研究进展,对其分析方法、等幅循环荷载到不规则荷载的扩展及应用规则、试验阻尼比的等效、滞回曲线形状等核心问题进行剖析、评价和探讨,并对各种模型的优缺点进行了比较和讨论,着重介绍了最近研究结果。最后指出未来发展方向及有待进一步研究的问题。  相似文献   

强人类活动驱动下珠江磨刀门河口径潮动力的季节性异变特征     

张先毅  杨昊  黄竞争  傅林曦  王恒  刘俊勇  欧素英  刘锋  蔡华阳  杨清书 《海洋与湖沼》2020,51(5):1043-1054

人类活动对河口环境影响巨大,揭示在强人类活动驱动下河口径潮动力非线性相互作用的异变特征,有利于了解人类活动影响河口动力地貌的机制,对河口区水利工程建设及环境保护等具有重要指导意义。基于1960—2016年珠江磨刀门河口沿程潮位站(甘竹、竹银、灯笼山、三灶)的逐月高、低潮位数据及马口水文站的月均流量数据,统计分析了磨刀门河口在强人类活动驱动下月均水位、潮波振幅及其空间梯度(即月均水位坡度和潮波振幅衰减率)的季节性异变特征。结果表明,1990年和2000年为磨刀门河口径潮动力的异变年份, 1990年前为自然演变阶段, 2000年后为恢复调整阶段,1990—2000年为过渡阶段;高强度采砂导致的河床下切使磨刀门河口月均水位及月均水位坡度显著减小,夏季减小幅度最为明显,沿程平均分别减小0.53m和8.93×10~(-6);月均水位坡度减小导致潮波衰减效应减弱,进而使沿程潮波振幅增大,多年平均增大0.071m;磨刀门河口径潮动力相互作用具有明显的季节性差异,夏季月均水位坡度随流量增大在上游抬升明显,冬季月均水位坡度在上游显著减小,但在下游略有抬升;随着流量的增大潮波振幅的衰减作用增强,但当流量超过阈值20000m~3/s时,月均水位坡度引起的底床摩擦增大效应不足以抵消横截面积辐散效应,潮波衰减效应略有减弱。  相似文献   

长江感潮河段潮波传播变化特征及影响因素分析     

黄竞争  张先毅  吴峥  刘锋  蔡华阳  杨清书 《海洋学报》2020,42(3):25-35

径潮相互作用是感潮河段水动力变化的典型特征,受其影响潮波传播具有明显的洪枯季及沿程变化。本文基于长江感潮河段天生港、江阴、镇江、南京、马鞍山及芜湖6个潮位站2002?2014年连续高低潮位资料及大通站月均流量数据,统计分析长江感潮河段潮波振幅衰减率、潮波传播速度及余水位坡度等传播特征值的洪枯季及沿程变化特征,并探讨这些潮波传播特征的变化规律及其主要影响因素。结果表明,潮波传播特征的洪枯季差异自上游至下游逐渐减小,其分界点位于天生港与江阴之间（其中,天生港和江阴站的多年平均洪枯季潮差差值约为0.01 m和?0.04 m）;径流动力对潮波衰减的影响主要位于江阴以上河段,江阴以下河段主要受潮汐动力控制;径流驱动下余水位坡度引起的余水位及水深增加,导致潮波传播的有效摩擦减小,当流量超过某个阈值时潮波振幅衰减反而减弱,特别是上游马鞍山-芜湖段最为明显,统计结果表明该河段流量阈值约为33 000 m3/s。本文分析结果作为前人研究的重要补充,可为长江河口感潮河段径潮相互作用机制研究及河口治理等提供基础参考。  相似文献   

圆筒型FPSO优化设计与水动力性能分析     

赵治民  李焱  唐友刚  何鑫  童波 《海洋工程》2020,38(1):11-19

针对圆筒型海上储油装置FPSO垂荡运动性能较差、无法安装干式井口的问题,设计了带延伸筒体与矩形阻尼结构的圆筒型FPSO,根据延伸筒体与矩形阻尼结构是否通海分为两种型式。建立水动力计算模型,比较分析不同延伸筒体和阻尼结构型式对FPSO水动力性能的影响。针对南海作业海域,设计了悬链式系泊系统,基于JONSWAP波浪谱对FPSO的运动进行时域预报,并对系泊系统进行校核。分析结果表明:通海型FPSO垂荡固有周期显著提升,可以错开南海百年一遇谱峰周期,通海型FPSO满足钻井、安装干式井口的运动响应要求,系泊系统系缆张力满足规范要求。  相似文献   

长江河口潮波传播机制及阈值效应分析   总被引：1，自引：0，他引：1  

张先毅  黄竞争  杨昊  欧素英  刘锋  蔡华阳  杨清书 《海洋与湖沼》2019,50(4):788-798

河口潮波传播过程受沿程地形(如河宽辐聚、水深变化)及上游径流等诸多因素影响,时空变化复杂。径潮动力非线性相互作用研究有利于揭示河口潮波传播的动力学机制,对河口区水资源高效开发利用具有重要指导意义。本文基于2007—2009年长江河口沿程天生港、江阴、镇江、南京、马鞍山、芜湖的逐日高、低潮位数据及大通站日均流量数据,统计分析不同河段潮波衰减率与余水位坡度随流量的变化特征,结果表明潮波衰减率绝对值与余水位坡度随流量增大并不是单调递增,而是存在一个阈值流量和区域,对应潮波衰减效应的极大值。为揭示这一阈值现象,采用一维水动力解析模型对研究河段的潮波传播过程进行模拟。结果表明,潮波传播的阈值现象主要是由于洪季上游回水作用随流量加强,余水位及水深增大,导致河口辐聚程度减小,而余水位坡度为适应河口形状变化亦有所减小,从而形成相对应的阈值流量和区域。  相似文献   

基于高分辨率风场的海洋近惯性能通量计算——时空特征及其影响因素     

杨兵  侯一筠 《海洋与湖沼》2020,51(5):978-990

基于高分辨率CFSR(climate forecast system reanalysis)风场资料、气候态海洋混合层厚度资料和卫星高度计海面高度异常资料,本文估计了大气风场向全球海洋混合层的近惯性能通量和近惯性能量输入功率,并探究了混合层厚度、风场时间分辨率、经验衰减系数和中尺度涡旋涡度对近惯性能通量和能量输入功率的影响。浮标实测风场和流速表明,本文所用的风场和阻尼平板模型可用于估计风场向全球海洋的近惯性能通量。本文计算得到的大气向全球海洋输入近惯性能量的功率为0.56TW(1TW=10~(12)W),其中北半球贡献0.22TW,南半球贡献0.34TW。在时间上,风场的近惯性能通量呈现各个半球冬季最强、夏季最弱的特征,这和西风带风场的季节变化有关。在空间上,近惯性能通量的高值海域为南、北半球西风带海洋,尤其是南大洋。混合层厚度和风场空间不均匀性使得西风带近惯性能通量呈现纬向变化,即海盆西部强于海盆东部。风场时间分辨率对近惯性能通量的估计至关重要,低时间分辨率风场对近惯性能通量的低估达到13%—30%。阻尼平板模型中的经验衰减系数对近惯性能通量估计的影响不超过5%。中尺度涡旋涡度仅改变近惯性能通量的空间分布,而对全球近惯性能量输入功率的影响可以忽略。  相似文献